Headlands to center bug

[CDNnate]

Version

8.1.0.1

Game Version

1.14.1.0

SP/MP

SP (Singleplayer)

What happened?

I have an issue with any tractor that has a 3 point on the front doesn't transition from head land route to center or the other way around. they just wander off. I have tried this with nothing but this mod and a base map same issue. I have tried the default course play settings and with everything active. I always run rounded corners on my fields.

How can we reproduce this?

run any field any map with a tractor that can have a 3 point in the options. run a field with an headland and center. it will wander off at the transition and stop...... The vervet in the background of the picture has no issues with pathing. the tractors like the Xerion 12.650 or 1167 vario mt also have no issues even using air seeders

What did you expect to happen?

It use to back up or loop

Attach your log.txt!

log.txt

Screenshots

[CDNnate]

It knows how to back up as shown here. both tractors fail the same way though

[regs1980]

Looks like it's the same problem and the same mod causing issues.
They also have FS25_TH_BetterWinch in the game.
An update to the new version would help.

#1134

Works perfectly
https://drive.google.com/file/d/1Xly4EjhuwPoWFpu9UINemCrELPXH6zC2/view?usp=drive_link

[CDNnate]

thatnk you that fixed it

[regs1980]

I have tried this with nothing but this mod and a base map same issue.

If they only tried CP and a map, the error would not happen.
This made them realize that CP wasn't the problem, but another mod.

[Symbob]

I also see this happen if you have courseplay baling a course created by a combine harvester. The combine harvests the field with no problems, but if you then use the same course for the baler, the baler finishes the headlands, stops for a short while before driving straight across the field until it crashes. I don't use the FS25_TH_BetterWinch mod.

Strangely I don't get the same problem if I have my baler following a course created by a mower. In this instance the baler follows the course perfectly.

I'm doing some more testing to see what conditions will replicate or eliminate the problem.

[Symbob]

Not sure if this is the same issue as the OP or not, but the symptoms are similar. I can open a separate issue report if needed.
I'm on Game version 1.15.0.0 and CP version 8.1.0.3 on Riverbend Springs Map. No mods installed except CP, all DLC's are deselected, so only CP running during my test.

As mentioned already, the baler is using the course created by the combine. The combine works fine, but the baler finishes the headlands and then carries on driving off the field until it crashes. I've tried many times trying different settings, and the result is always the same.

Video here:

https://drive.google.com/file/d/1RcfAXXRedbi28JLzqk8YcRSw9RodAQ1X/view?usp=drive_link

log2.txt

[Symbob]

On further testing it would appear that this problem only happens for me with the MF 2370 Ultra HD and Fendt Squadra 1290 N UD square balers . I've not tried every baler in the game, but I've tried most of them. These two balers are the only ones I've found so far that have this problem.