diff --git a/examples/EmotiBit_examples/input_digitalPinLogging/README.md b/examples/EmotiBit_examples/input_digitalPinLogging/README.md
new file mode 100644
index 00000000..42bc16eb
--- /dev/null
+++ b/examples/EmotiBit_examples/input_digitalPinLogging/README.md
@@ -0,0 +1,8 @@
+# Digital Input Pin Logging
+
+# Instructions for use
+- Wire up an switch between 3V3 and the specified pin 
+  - <img src="./assets/digital_input_pin.png" width="300">
+- Open the serial monitor with baud 2000000 and toggle the switch observe detected digital pin changes
+  - [ToDo: insert image]
+- Once recording is started from the `EmotiBit Oscilloscope`, timestamped events with the TypeTag `D0` will be logged to the SD card with other data streams
diff --git a/examples/EmotiBit_examples/input_digitalPinLogging/assets/digital_input_pin.png b/examples/EmotiBit_examples/input_digitalPinLogging/assets/digital_input_pin.png
new file mode 100644
index 00000000..58df1d28
Binary files /dev/null and b/examples/EmotiBit_examples/input_digitalPinLogging/assets/digital_input_pin.png differ
diff --git a/examples/EmotiBit_examples/input_digitalPinLogging/input_digitalPinLogging.ino b/examples/EmotiBit_examples/input_digitalPinLogging/input_digitalPinLogging.ino
new file mode 100644
index 00000000..5163e9cb
--- /dev/null
+++ b/examples/EmotiBit_examples/input_digitalPinLogging/input_digitalPinLogging.ino
@@ -0,0 +1,115 @@
+#include <Arduino.h>
+#include "EmotiBit.h"
+
+bool pinStatus; // stores digital pin status to detect changes
+#if defined ARDUINO_FEATHER_ESP32
+const int digitalInputPin = 33;	// Pin on which to read digital input
+#endif
+#ifdef ADAFRUIT_FEATHER_M0
+const int digitalInputPin = 10;	// Pin on which to read digital input
+#endif
+
+#define SerialUSB SERIAL_PORT_USBVIRTUAL // Required to work in Visual Micro / Visual Studio IDE
+const uint32_t SERIAL_BAUD = 2000000; //115200
+
+EmotiBit emotibit;
+const size_t dataSize = EmotiBit::MAX_DATA_BUFFER_SIZE;
+float data[dataSize];
+
+void onShortButtonPress()
+{
+	// toggle wifi on/off
+	if (emotibit.getPowerMode() == EmotiBit::PowerMode::NORMAL_POWER)
+	{
+		emotibit.setPowerMode(EmotiBit::PowerMode::WIRELESS_OFF);
+		Serial.println("PowerMode::WIRELESS_OFF");
+	}
+	else
+	{
+		emotibit.setPowerMode(EmotiBit::PowerMode::NORMAL_POWER);
+		Serial.println("PowerMode::NORMAL_POWER");
+	}
+}
+
+void onLongButtonPress()
+{
+	emotibit.sleep();
+}
+
+void setup() 
+{
+	Serial.begin(SERIAL_BAUD);
+	Serial.println("Serial started");
+	delay(2000);	// short delay to allow user to connect to serial, if desired
+
+	// Capture the calling ino into firmware_variant information
+	String inoFilename = __FILE__;  // returns absolute path of ino file
+	inoFilename.replace("/","\\");  // conform to standard directory separator
+	// extract filename only if directory separator found in absolute path
+	if(inoFilename.lastIndexOf("\\") != -1)
+	{
+		inoFilename = inoFilename.substring((inoFilename.lastIndexOf("\\")) + 1,(inoFilename.indexOf(".")));
+	}
+	emotibit.setup(inoFilename);
+
+	// Attach callback functions
+	emotibit.attachShortButtonPress(&onShortButtonPress);
+	emotibit.attachLongButtonPress(&onLongButtonPress);
+  
+  // Attach interrupts to the rising and falling edges of a digital input on a free pin
+	// IMPORTANT NOTE: digital input pins must never exceed the range GND-0.6v to VDD+0.6V (i.e. best to keep it within 0V-3.3V)
+	// See Feather M0 pinouts: https://learn.adafruit.com/adafruit-feather-m0-wifi-atwinc1500/pinouts
+  // See Huzzah32 pinouts: https://learn.adafruit.com/adafruit-huzzah32-esp32-feather/pinouts
+  // See EmotiBit pinouts: https://github.com/EmotiBit/EmotiBit_Docs/tree/master/hardware_files
+	// See https://www.arduino.cc/reference/en/language/functions/external-interrupts/attachinterrupt/
+	// ToDo: consider the best way to toggle attaching sync pulse interrupts
+	// Options:
+	//	- dedicate specified pin in main-line code
+	//	- comment in/out
+	//	- boolean / ifdef at top of ino
+	//	- separate ino/bin (present method)
+	//	- reading field from SD card
+	//	- control message from EmotiBit Oscilloscope
+	Serial.print("INPUT_PULLDOWN to digital pin ");
+	Serial.println(digitalInputPin);
+	pinMode(digitalInputPin, INPUT_PULLDOWN);
+	//attachInterrupt(digitalPinToInterrupt(digitalInputPin), digitalInputChange, CHANGE); // Interrupt seems to crash ESP32
+}
+
+void loop()
+{
+	//Serial.println("emotibit.update()");
+	emotibit.update();
+  
+  // Handle DIO event data
+  bool temp = digitalRead(digitalInputPin);
+  if (pinStatus != temp)
+  {
+    // Pin change detected
+    pinStatus = temp;
+    float dioData = (float) pinStatus; // cast pin status to a float for compatibility with addPacket
+    // ToDo: consider adding EmotiBitPacket::TypeTag::DIGITAL_INPUT_0
+    emotibit.addPacket(millis(), "D0", &dioData, 1);	// See EmotiBitPacket for available TypeTags https://github.com/EmotiBit/EmotiBit_XPlat_Utils/blob/master/src/EmotiBitPacket.cpp// 
+
+    Serial.print("D0: ");
+    Serial.println((int) dioData);
+  }
+
+  // Grab some EmotiBit sensor data and do something with it!
+	size_t dataAvailable = emotibit.readData(EmotiBit::DataType::PPG_GREEN, &data[0], dataSize);
+	if (dataAvailable > 0)
+	{
+		// Hey cool, I got some data! Maybe I can light up my shoes whenever I get excited!
+
+		// print the data to view in the serial plotter
+		bool printData = false;
+		if (printData)
+		{
+			for (size_t i = 0; i < dataAvailable && i < dataSize; i++)
+			{
+				// Note that dataAvailable can be larger than dataSize
+				Serial.println(data[i]);
+			}
+		}
+	}
+}
\ No newline at end of file