Lines / wires

[mrekin]

Hi!
While Tom and iuvi already here.. )

1. Make power (raw/5v) lines wider
2. Avoid 90° corners on lines.
3. Connect to gnd all related module pins and use ground plane (as Tom arlready mentioned)

[maxmenGMK]

Agree with @mrekin . Would be better to make power lines more wider. And other lines would be nice to make wider also to prevent overheat damage during soldering process.

[Hamspiced]

All the Current traces are 0.2mm I intend to make the shared power thicker.

I couldn't find a pro micro footprint to add so there wasn't a schematic made, I want to build it on board to make this a bit cleaner and draw the traces more efficiently. This was a quick and dirty build to prototype and see a proof of concept. As I really don't like the idea of bottoming the header for the pro micro out in the E22.

[Hamspiced]

Hi! While Tom and iuvi already here.. )

1. Make power (raw/5v) lines wider
2. Avoid 90° corners on lines.
3. Connect to gnd all related module pins and use ground plane (as Tom arlready mentioned)

Please review current Gerber. I believe this satisfies this issue request.

[iuvi7]

@mrekin

[mrekin]

On vacation now, so will be able to review on the next week )