Power rail and Buzzer Needs to be tested

[jnorwoo]

When testing the code I found that the Led definitions for the red and green pins were wrong. I wonder if the buzzer pin and power rail is also wrong as I did not hear a buzz from the buzzer. I still need to test pins,

[Sidd-GrizzAp3]

Well to be honest. I used the two pins from the existing code that @jasteve4 wrote to initialize the gpio ports. Also, the fets have not been hooked up, so there's that issue. What i wanted to say was that basically these pins might be wrong, and we might need to review the pinout in the schematic and see if we have them right.

[jasteve4]

There buzzer is not installed. I never bought one.