From 06833e98068482fb4e6c9e549368aa1c0fb0c683 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sun, 26 Nov 2023 20:24:25 +0800 Subject: [PATCH 01/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 42ee3a70ef..fe0c69d861 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -1,8 +1,8 @@ { "0 Gap": "0 Lücken", - "20W Laser Module": "20W Laser Module", + "20W Laser Module": "20W Laser Modul", "3D Printer": "3D-Drucker", - "40W Laser Module": "40W Laser Module", + "40W Laser Module": "40W Laser Modul", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.", "ABS": "ABS", "ASA": "ASA", From 90919148763d914ed6f17f55d5b963d42befa547 Mon Sep 17 00:00:00 2001 From: parachvte Date: Mon, 27 Nov 2023 21:18:05 +0800 Subject: [PATCH 02/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 290 ++++++++++++------------ 1 file changed, 145 insertions(+), 145 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index fe0c69d861..e3aa018690 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -3,19 +3,19 @@ "20W Laser Module": "20W Laser Modul", "3D Printer": "3D-Drucker", "40W Laser Module": "40W Laser Modul", - "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.", + "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "Ein Wert von 0-4095 regelt die Sensorempfindlichkeit, wobei niedrigere Werte eine geringere Empfindlichkeit angeben.\nEin Wert von 4096 schaltet die Erkennung aus.", "ABS": "ABS", "ASA": "ASA", - "Abnormal Laser Emitter. Please contact our Support for help.": "Abnormal Laser Emitter. Please contact our Support for help.", - "Abnormal Laser Heat Dissipation. Please contact our Support for help.": "Abnormal Laser Heat Dissipation. Please contact our Support for help.", - "Abnormal Laser Temperature Sensor. Please contact our Support for help.": "Abnormal Laser Temperature Sensor. Please contact our Support for help.", - "Abnormal Toolhead Orientation Detection. Please contact our Support for help.": "Abnormal Toolhead Orientation Detection. Please contact our Support for help.", + "Abnormal Laser Emitter. Please contact our Support for help.": "Fehlerhafter Laser-Emitter. Bitte kontaktieren Sie unseren Support für Hilfe.", + "Abnormal Laser Heat Dissipation. Please contact our Support for help.": "Fehlerhafte Laserkühlung. Bitte wenden Sie sich an unseren Support für Hilfe.", + "Abnormal Laser Temperature Sensor. Please contact our Support for help.": "Fehlerhafter Lasertemperatur Sensor. Bitte wenden Sie sich an unseren Support für Hilfe.", + "Abnormal Toolhead Orientation Detection. Please contact our Support for help.": "Fehlerhafte Werkzeugkopf-Position erkannt. Bitte kontaktieren Sie unseren Support für Hilfe.", "Absolute Extruder Prime Position": "Absolute Extruder Prime Position", "Adaptive Layers Maximum Variation": "Maximale Variation für adaptive Ebenen", "Adaptive Layers Topography Size": "Adaptive Ebenen Topografiegröße", "Adaptive Layers Variation Step Size": "Adaptive Ebenenvariation Schrittgröße", "Adhesion Tendency": "Adhesion-Tendenz", - "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.", + "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Luftfilter getrennt. Bitte schalten Sie die Maschine aus, verbinden den Luftfilter neu und starten Sie neu. Wenn das Problem weiterhin besteht, wenden Sie sich an unseren Support für Unterstützung.", "All": "Alle", "All at Once": "Alle gleichzeitig", "Allowance": "Erlaubnis", @@ -29,7 +29,7 @@ "Anti-ooze Retraction Speed": "Einzugsgeschwindigkeit für Sickerschutz", "Are you sure you want to stop the print job?": "Bist du sicher, dass du die Bearbeitung stoppen willst?", "Auto Temperature": "Automatische Temperatur", - "Air Assist Pump": "Air Assist Pump", + "Air Assist Pump": "Hilfsluftpumpe", "Avoid Printed Parts When Traveling": "Bedruckte Teile umfahren", "Avoid Supports When Traveling": "Vermeiden Sie Stützen beim verfahren", "Back": "Hinten", @@ -75,7 +75,7 @@ "Brim Only on Outside": "Brim nur an Außenseite", "Brim Replaces Support": "Brim ersetzt die Stützstruktur", "Brim Width": "Brim Breite", - "Bug fixes": "Bug fixes", + "Bug fixes": "Behebung von Bugs", "Build Plate Adhesion": "Druckplattenhaftung", "Build Plate Adhesion Extruder": "Druckbetthaftung für Extruder", "Build Plate Adhesion Type": "Druckplattenhaftung Typ", @@ -87,8 +87,8 @@ "CNC": "CNC", "Carving Tool": "Gravierwerkzeug", "Center Object": "Objekt zentrieren", - "Changelogs": "Changelogs", - "Close": "Close", + "Changelogs": "Änderungshistorie", + "Close": "Schließen", "Coasting Speed": "Coasting-Geschwindigkeit", "Coasting Volume": "Coasting-Volumen", "Color": "Farbe", @@ -96,7 +96,7 @@ "Combing Mode": "Combing-Modus", "Command Line Settings": "Einstellungen Befehlszeile", "Compensate": "Kompensieren", - "Compressing file. Please wait…": "Compressing file. Please wait…", + "Compressing file. Please wait…": "Datei wird komprimiert. Bitte warten…", "Concentric": "Konzentrisch", "Conical Support Angle": "Konische Stützwinkel", "Conical Support Minimum Width": "Minimale Konischen Support Breite", @@ -105,12 +105,12 @@ "Connect Support Lines": "Stützlinien verbinden", "Connect Support ZigZags": "Zickzack-Elemente Stützstruktur verbinden", "Connect Top/Bottom Polygons": "Polygone oben/unten verbinden", - "Connected": "Connected", - "Connecting": "Connecting", - "Connecting to the machine...": "Connecting to the machine...", - "Constant Power Mode": "Constant Power Mode", - "Control": "Control", - "Control Mode": "Control Mode", + "Connected": "Verbunden", + "Connecting": "Verbindung wird hergestellt", + "Connecting to the machine...": "Verbindung zur Maschine wird hergestellt...", + "Constant Power Mode": "Konstant-Energie-Modus", + "Control": "Steuerung", + "Control Mode": "Kontroll-Modus", "Cool Down Speed": "Abkühlgeschwindigkeit", "Cooling": "Kühlung", "Cross": "Kreuz", @@ -118,17 +118,17 @@ "Cross 3D Pocket Size": "Größe 3D-Quertasche", "Cross Fill Density Image for Support": "Querfülldichte Bild für Stützstruktur", "Cross Infill Density Image": "Querfülldichte Bild", - "Crosshair": "Crosshair", - "Crosshair Offset": "Crosshair Offset", - "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.": "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.", + "Crosshair": "Fadenkreuz", + "Crosshair Offset": "Fadenkreuz Versatz", + "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.": "Der Fadenkreuz-Modus verwendet das Fadenkreuz zur Positionierung, während der Laser-Punkt-Modus den Arbeitslaser zur Positionierung verwendet.", "Crystalline Material": "Kristallines Material", "Cubic": "Kubisch", "Cubic Subdivision": "Kubische Unterteilung", "Cubic Subdivision Shell": "Gehäuse Würfel-Unterbereich", - "Current firmware version": "Current firmware version", + "Current firmware version": "Aktuelle Firmware-Version", "Cutting Diameter": "Schneidedurchmesser", "Cutting Mesh": "Schneidennetz", - "Decompressing file. Please wait…": "Decompressing file. Please wait…", + "Decompressing file. Please wait…": "Dekomprimiere Datei. Bitte warten Sie…", "Default Acceleration": "Voreingestellte Beschleunigung", "Default Build Plate Temperature": "Bett Standardtemperatur", "Default Filament Jerk": "Voreingestellter Filament-Ruck", @@ -144,10 +144,10 @@ "Don't Save": "nicht speichern", "Don't show again": "Nicht mehr anzeigen", "Don't show again in current session": "In der aktuellen Sitzung nicht mehr anzeigen", - "Door Detection": "Door Detection", + "Door Detection": "Türerkennung", "Dot": "Punkt", - "Dot width compensation": "Dot width compensation", - "Downloading": "Downloading", + "Dot width compensation": "Punktbreiten-Kompensation", + "Downloading": "Wird heruntergeladen", "Draft Shield Height": "Höhe des Windschutzes", "Draft Shield Limitation": "Begrenzung des Windschutzes", "Draft Shield X/Y Distance": "X/Y-Abstand des Windschutzes", @@ -156,8 +156,8 @@ "Dual Extrusion Helper Type": "Dual Druck Helfertyp", "Dwell Time": "Verweilzeit", "Elliptic": "Elliptisch", - "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.", - "Emergency stop button triggered": "Emergency stop button triggered", + "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Notfallstopp. Bitte stellen Sie sicher, dass keine Gefahr besteht und starten Sie die Maschine nach dem Rücksetzen des Notfall-Stopp-Schalters neu.", + "Emergency stop button triggered": "Notfall-Stop-Schalter ausgelöst", "Enable Acceleration Control": "Beschleunigungssteuerung aktivieren", "Enable Bridge Settings": "Brückeneinstellungen aktivieren", "Enable Coasting": "Coasting aktivieren", @@ -184,25 +184,25 @@ "Enabled Ooze Shield": "Sickerschutz aktivieren", "Enabled Prime Tower": "Prime-Turm aktiviert", "Enabled Support Interface": "Aktivierte Support-Schnittstelle", - "Enclosure": "Enclosure", + "Enclosure": "Gehäuse", "End G-code": "Ende G-Code", "End of Filament Purge Length": "Ende der Filamentreinigungslänge", "End of Filament Purge Speed": "Ende der Filamentreinigungsgeschwindigkeit", "Equalize Filament Flow": "Filamentfluss ausgleichen", - "Error occurs on the Ray controller, error code: {{-errorCode}}": "Error occurs on the Ray controller, error code: {{-errorCode}}", - "Error occurs on the Ray multi-function button, error code: {{-errorCode}}": "Error occurs on the Ray multi-function button, error code: {{-errorCode}}", - "Error occurs on the air purifier, error code: {{-errorCode}}": "Error occurs on the air purifier, error code: {{-errorCode}}", - "Error occurs on the enclosure, error code: {{-errorCode}}": "Error occurs on the enclosure, error code: {{-errorCode}}", - "Error occurs on the laser module, error code: {{-errorCode}}": "Error occurs on the laser module, error code: {{-errorCode}}", - "Error occurs owner: {{-owner}}, error code: {{-errorCode}}": "Error occurs owner: {{-owner}}, error code: {{-errorCode}}", + "Error occurs on the Ray controller, error code: {{-errorCode}}": "Fehler beim Ray-Controller, Fehlercode: {{-errorCode}}", + "Error occurs on the Ray multi-function button, error code: {{-errorCode}}": "Fehler auf dem Ray Multifunktions-Button, Fehlercode: {{-errorCode}}", + "Error occurs on the air purifier, error code: {{-errorCode}}": "Fehler beim Air Purifier, Fehlercode: {{-errorCode}}", + "Error occurs on the enclosure, error code: {{-errorCode}}": "Fehler beim Gehäuse, Fehlercode: {{-errorCode}}", + "Error occurs on the laser module, error code: {{-errorCode}}": "Fehler beim Lasermodul, Fehlercode: {{-errorCode}}", + "Error occurs owner: {{-owner}}, error code: {{-errorCode}}": "Fehler aufgetreten bei: {{-owner}}, Fehlercode: {{-errorCode}}", "Everywhere": "Überall", "Exclusive": "Exklusiv", "Experimental": "Experimentelle", "Export": "Export", - "Export log successfully.": "Export log successfully.", - "Export machine log to SD card.": "Export machine log to SD card.", - "Export the G-code file to a local device or load it to Workspace.": "Export the G-code file to a local device or load it to Workspace.", - "Exporting": "Exporting", + "Export log successfully.": "Log erfolgreich exportiert.", + "Export machine log to SD card.": "Exportiere die Maschinenlogdatei auf SD-Karte.", + "Export the G-code file to a local device or load it to Workspace.": "Exportieren Sie die G-Code-Datei auf ein lokales Gerät oder laden Sie sie in den Workspace.", + "Exporting": "Exportiere", "Expose Seam": "Naht offenlegen", "Extensive Stitching": "Extensives Stitching", "Extra Infill Wall Count": "Zusätzliche Füllung Wandlinien", @@ -224,29 +224,29 @@ "Extruders Share Nozzle": "Extruder Heizung teilen", "Extrusion": "Extrusion", "Extrusion Cool Down Speed Modifier": "Geschwindigkeitsregulierer für Abkühlung bei Extrusion", - "Failed to Home.Please check if any Linear Module is prevented from moving.If the problem persists, contact our Support for help.": "Failed to Home.Please check if any Linear Module is prevented from moving.If the problem persists, contact our Support for help.", - "Failed to download firmware.": "Failed to download firmware.", - "Failed to export log.": "Failed to export log.", + "Failed to Home.Please check if any Linear Module is prevented from moving.If the problem persists, contact our Support for help.": "Fehler beim Verfahren der Module. Bitte überprüfen Sie, ob die Linear-Module nicht blockiert sind. Falls das Problem weiterhin besteht, kontaktieren Sie unseren Support für Hilfe.", + "Failed to download firmware.": "Fehler beim Herunterladen der Firmware.", + "Failed to export log.": "Fehler beim Exportieren der Log-Datei.", "Failed to import this object. \nPlease select a supported file format.": "Importieren dieses Objekt fehlgeschlagen. \nBitte wählen Sie ein unterstütztes Dateiformat aus.", "Failed to rename. \"{{name}}\" already exists.": "Umbenennung fehlgeschlagen. „{{Name}}“ existiert bereits.", "Failed to repair this object. \n": "Fehler beim Reparieren dieses Objekts. \n", - "Failed to turn off crosshair.": "Failed to turn off crosshair.", - "Failed to turn on crosshair.": "Failed to turn on crosshair.", - "Failed to upgrade firmware.": "Failed to upgrade firmware.", + "Failed to turn off crosshair.": "Fadenkreuz konnte nicht deaktiviert werden.", + "Failed to turn on crosshair.": "Fadenkreuz konnte nicht aktiviert werden.", + "Failed to upgrade firmware.": "Firmware konnte nicht aktualisiert werden.", "Fan Speed": "Lüftergeschwindigkeit", "Fan Speed Override": "Übersteuerung der Lüftergeschwindigkeit", "Feeder Wheel Diameter": "Feeder-Raddurchmesser", - "File sent successfully. Press and hold the work switch on the integrated controller (for about 3 seconds) until the machine starts the task.": "File sent successfully. Press and hold the work switch on the integrated controller (for about 3 seconds) until the machine starts the task.", + "File sent successfully. Press and hold the work switch on the integrated controller (for about 3 seconds) until the machine starts the task.": "Die Datei wurde erfolgreich gesendet. Drücken und halten Sie den Button auf dem integrierten Controller (ca. 3 Sekunden) bis die Maschine die Aufgabe startet.", "Fill": "Füllen", "Fill Interval": "Füll Interval", "Final Printing Temperature": "Endgültige Drucktemperatur", - "Fire Sensor Sensitivity": "Fire Sensor Sensitivity", + "Fire Sensor Sensitivity": "Empfindlichkeit des Feuersensors", "Firmware": "Firmware", "Firmware Retraction": "Firmware-Einzug", - "Firmware Upgrade Available": "Firmware Upgrade Available", + "Firmware Upgrade Available": "Firmware-Update verfügbar", "First Layer Optimization": "Optimierung für erste schicht", "First Layer Support Extruder": "Stützextruder für die erste Schicht", - "Flame detected. Please short press the button to resume work when it is safe to do so. The sensitivity of the flame detection can be modified in the machine settings.": "Flame detected. Please short press the button to resume work when it is safe to do so. The sensitivity of the flame detection can be modified in the machine settings.", + "Flame detected. Please short press the button to resume work when it is safe to do so. The sensitivity of the flame detection can be modified in the machine settings.": "Flamme erkannt. Bitte drücken Sie die Schaltfläche, um die Arbeit fortzusetzen, wenn dies sicher ist. Die Empfindlichkeit der Flammenerkennung kann in den Maschineneinstellungen geändert werden.", "Flat": "Flach", "Flow": "Fluss", "Flow Equalization Ratio": "Durchflussausgleichsverhältnis", @@ -255,7 +255,7 @@ "Flow Temperature Graph": "Fließtemperaturgraf", "Flush Purge Length": "Säuberungsdauer leeren", "Flush Purge Speed": "Säuberungsgeschwindigkeit leeren", - "For laser engraving, you can preview the toolpath.": "For laser engraving, you can preview the toolpath.", + "For laser engraving, you can preview the toolpath.": "Für die Lasergravur können sie eine Voransicht des Werkzeugpfads ansehen.", "Front": "Vorne", "Front Left": "Vorne Links", "Front Right": "Vorne Rechts", @@ -277,7 +277,7 @@ "Grid": "Raster", "Griffin": "Griffin", "Gyroid": "Kreisel", - "Half Diode Mode": "Half Diode Mode", + "Half Diode Mode": "Halb-Dioden-Modus", "Has Build Volume Temperature Stabilization": "Hat die Volumen-Temperaturstabilisierung gebaut", "Has Heated Build Plate": "Mit beheizter Druckplatte", "Heat Up Speed": "Aufheizgeschwindigkeit", @@ -290,10 +290,10 @@ "Horizontal": "Horizontal", "Horizontal Expansion": "Horizontale Erweiterung", "Horizontal Scaling Factor Shrinkage Compensation": "Horizontale Skalierungsfaktor Schrumpfung", - "Imgae create failed.": "Imgae create failed.", - "Improvements": "Improvements", - "In object origin mode, the origin is at the corners or center of the object.": "In object origin mode, the origin is at the corners or center of the object.", - "In workpiece origin mode, the origin is at the corners or center of the workpiece.": "In workpiece origin mode, the origin is at the corners or center of the workpiece.", + "Imgae create failed.": "Bild-Erstellung fehlgeschlagen.", + "Improvements": "Verbesserungen", + "In object origin mode, the origin is at the corners or center of the object.": "Im Objekt-Ursprungs-Modus befindet sich der Ursprung in den Ecken oder in der Mitte des Objekts.", + "In workpiece origin mode, the origin is at the corners or center of the workpiece.": "Im Werkstück-Ursprungs-Modus befindet sich der Ursprung in den Ecken oder in der Mitte des Werkstücks.", "Include Build Plate Temperature": "Temperatur Druckplatte", "Include Material Temperatures": "Materialtemperaturen einbeziehen", "Inclusive": "Inklusive", @@ -369,19 +369,19 @@ "Jog Height": "Jog-Höhe", "Jog Speed": "Jog-Tempo", "Keep Disconnected Faces": "Keep Disconnected Faces", - "Keep Laser On When Moving": "Keep Laser On When Moving", - "Keep the device attended while it is in use!": "Keep the device attended while it is in use!", + "Keep Laser On When Moving": "Laser eingeschaltet lassen bei Bewegung", + "Keep the device attended while it is in use!": "Halten Sie das Gerät unter Beobachtung, während es in Gebrauch ist!", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "Das Objekt hat die Arbeitsgröße überschritten. Auf die maximale Arbeitsgröße skalieren?", "Key-Laser/ImportScale-Scale To Fit": "Skalieren zum Anpassen", "Key-Workspace/LaserStartJob-manual_mode_description": "Key-Workspace/LaserStartJob-Manual_Modus_Beschreibung", "Knot": "Knoten", - "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.", - "Laser Locked. Please unlock it on the controller.": "Laser Locked. Please unlock it on the controller.", - "Laser PCBA Overheat. Please power off the machine, wait for a while, and restart. If this occurs frequently, contact our Support for help.": "Laser PCBA Overheat. Please power off the machine, wait for a while, and restart. If this occurs frequently, contact our Support for help.", + "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Laser-Emitter-Überhitzung. Bitte schalten Sie die Maschine aus, warten Sie eine Weile und starten Sie den Vorgang neu. Wenn dies öfter auftritt, wenden Sie sich an unseren Support für Hilfe.", + "Laser Locked. Please unlock it on the controller.": "Laser gesperrt. Bitte entsperren Sie ihn am Controller.", + "Laser PCBA Overheat. Please power off the machine, wait for a while, and restart. If this occurs frequently, contact our Support for help.": "Laser-Platine-Überhitzung. Bitte schalte die Maschine aus, warte eine Weile und starte neu. Wenn dies häufiger auftritt, kontaktiere unseren Support für Hilfe.", "Laser Power": "Laserleistung", - "Laser Power Level Divisions": "Laser Power Level Divisions", - "Laser Spot": "Laser Spot", - "Latest firmware version": "Latest firmware version", + "Laser Power Level Divisions": "Laser-Leistungsstufenbereiche", + "Laser Spot": "Laserpunkt", + "Latest firmware version": "Aktuelle Firmware-Version", "Layer Height": "Schichthöhe", "Layer Start X": "Layer Start X", "Layer Start Y": "Ebene Start Y", @@ -400,23 +400,23 @@ "Line Direction": "Linienrichtung", "Line Width": "Linienbreite", "Lines": "Linie", - "Load New G-code": "Load New G-code", + "Load New G-code": "Lade neuen G-Code", "Mach3": "Mach3", "Machine": "Maschiene", - "Machine Control": "Machine Control", + "Machine Control": "Maschinensteuerung", "Machine Depth": "Gerätetiefe", - "Machine Firmware": "Machine Firmware", + "Machine Firmware": "Maschinen-Firmware", "Machine Head & Fan Polygon": "Gerätekopf und Lüfter Polygon", "Machine Height": "Maschinenhöhe", - "Machine Log": "Machine Log", + "Machine Log": "Maschinen-Log", "Machine Maximum Print Temperature": "Maximale Drucktemperatur des Geräts", "Machine Network": "Machine Network", - "Machine Settings": "Machine Settings", + "Machine Settings": "Maschineneinstellungen", "Machine Type": "Maschinen Typ", "Machine Width": "Maschinenbreite", "Make Overhang Printable": "Überhang drucken lassen", "Makerbot": "Makerbot", - "Manual Mode": "Manual Mode", + "Manual Mode": "Manueller Modus", "Marlin": "Marlin", "Marlin (Volumetric)": "Marlin (Volumetrisch)", "Material": "Material", @@ -468,7 +468,7 @@ "Minimum Feature Size": "Mindestgröße des Merkmals", "Minimum Feedrate": "Mindest-Vorschub", "Minimum Infill Area": "Mindestbereich Füllung", - "Minimum Laser Power": "Minimum Laser Power", + "Minimum Laser Power": "Minimale Laserleistung", "Minimum Layer Time": "Mindestzeit für Schicht", "Minimum Odd Wall Line Width": "Minimale Wandlinienstärke (ungeradzahlig)", "Minimum Polygon Circumference": "Mindestumfang Polygon", @@ -494,15 +494,15 @@ "Monotonic Top/Bottom Order": "Monotone obere/untere Ordnung", "More Settings": "Mehr Einstellungen", "Movement Mode": "Bewegungsmodus", - "Network": "Network", - "New Features": "New Features", - "No": "No", + "Network": "Netzwerk", + "New Features": "Neue Funktionen", + "No": "Nein", "No Load Move Factor": "Kein Beladungsfaktor", "No Skin in Z Gaps": "Kein Skin in Z Lücken", "No use": "Nicht verwendet", "None": "Keine", "Normal": "Normal", - "Not Connected": "Not Connected", + "Not Connected": "Nicht verbunden", "Not in Skin": "Nicht in Skin", "Not on Outer Surface": "Nicht auf äußerer Oberfläche", "Nozzle Angle": "Düsen winkel", @@ -547,17 +547,17 @@ "Over Scanning": "Over Scanning", "Overhanging Wall Angle": "Überhängender Wandwinkel", "Overhanging Wall Speed": "Überhängende Wandgeschwindigkeit", - "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.", - "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.", + "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreitung des Limits. X-Achsen-Grenzschalter ausgelöst. Bewegungsbereich überschreitet die Maschinengrenzen. Wenn es während der Bearbeitung auftritt, stellen Sie die Home-Position der Maschine ein oder kontrollieren Sie, dass der Gcode korrekt ist.", + "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreitung des Limits. Y-Achsen-Grenzschalter ausgelöst. Bewegungsbereich überschreitet die Maschinengrenzen. Wenn es während der Bearbeitung auftritt, stellen Sie die Home-Position der Maschine ein oder kontrollieren Sie, dass der Gcode korrekt ist.", "PC": "PC", "PETG": "PETG", "PLA": "PLA", "PVA": "PVA", "Parameters": "Parameter", - "Password": "Password", + "Password": "Passwort", "Past Boundary": "Trennen von Grenze", "Please go to the machine, click work switch to run boundary. If the enclosure is installed, the enclosure door needs to be closed.": "Please go to the machine, click work switch to run boundary. If the enclosure is installed, the enclosure door needs to be closed.", - "Please select a vector and an image at the same time.": "Please select a vector and an image at the same time.", + "Please select a vector and an image at the same time.": "Bitte wählen Sie gleichzeitig einen Vektor und ein Bild.", "Plunge Speed": "Eintauchtempo", "Point Angle": "Punktwinkel", "Preset": "Voreinstellung", @@ -652,15 +652,15 @@ "Run Boundary": "Ausführungsgrenze", "Scale Fan Speed To 0-1": "Scale Fan Speed To 0-1", "Scaling Factor Shrinkage Compensation": "Scaling Factor Shrinkage Compensation", - "Scan Offset": "Scan Offset", + "Scan Offset": "Scan-Versatz", "Scene Has Support Meshes": "Scene Has Support Meshes", "Seam Corner Preference": "Nahtecke-Präferenz", "Select the slicing mode of the mesh toolpath": "Wählen Sie den Schnittmodus für den Maschenwerkzeugspfad", "Select the way that the dots are arranged.\n- Line: Dots are arranged into lines.\n- Round: Dots are arranged into rounds.\n- Diamond: Dots are arranged into diamonds.": "Wählen Sie die Art und Weise, wie die Punkte angeordnet sind.\n- Linie: Punkte sind in Linien angeordnet.\n- Runde: Punkte sind in Runden angeordnet.\n- Diamond: Punkte sind in Diamanten angeordnet.", - "Sending file. Please wait… {{ progress }}%": "Sending file. Please wait… {{ progress }}%", + "Sending file. Please wait… {{ progress }}%": "Datei wird gesendet. Bitte warten Sie…{{ progress }}%", "Separate": "Separate", "Set Luban render color.": "Materialfarbe.", - "Set Origin Mode": "Set Origin Mode", + "Set Origin Mode": "Ursprungs-Modus festlegen", "Set how many times the laser will trace the same path in a G-code file.": "Stellen Sie ein, wie oft der Laser denselben Pfad in einer G-Code-Datei verfolgen soll.", "Set the amount at which the Laser Module is lowered with each pass.": "Stellen Sie ein, um wie viel das Lasermodul bei jedem Durchgang abgesenkt wird.", "Set the amount of the material remaining on the object that needs to be carved in future operations.": "Legen Sie die Menge des auf dem Objekt verbleibenden Materials fest, das in zukünftigen Vorgängen geschnitzt werden muss.", @@ -686,7 +686,7 @@ "Set the speed at which the toolhead moves on the material when it is not engraving or cutting.": "Stellen Sie das Tempo ein, mit dem sich der Werkzeugkopf auf dem Material bewegt, wenn er nicht graviert oder Schneiden.", "Set the width of tabs.": "Stellen Sie die Breite der Reiter ein.", "Set whether the object is filled with lines or dots.": "Bestimmen Sie, ob das Objekt mit Linien oder Punkten gefüllt wird.", - "Settings": "Settings", + "Settings": "Einstellungen", "Shaft Diameter": "Schaft-Durchmesser", "Shank Diameter": "Zapfendurchmesser", "Shared Nozzle Initial Retraction": "Shared Nozzle Initial Retraction", @@ -729,7 +729,7 @@ "Step down": "Schritt runter", "Stepdown": "Abstieg", "Stepover": "Umstieg", - "Steppers are disabled. You can push XY axes to move the tool head.": "Steppers are disabled. You can push XY axes to move the tool head.", + "Steppers are disabled. You can push XY axes to move the tool head.": "Stepper sind deaktiviert. Du kannst XY-Achsen verschieben, um den Werkzeugkopf zu bewegen.", "Steps per Millimeter (E)": "Schritte pro Millimeter (E)", "Steps per Millimeter (X)": "Schritte pro Millimeter (X)", "Steps per Millimeter (Y)": "Schritte pro Millimeter (Y)", @@ -828,12 +828,12 @@ "Temperature & Cooling": "Temperatur & Kühlung", "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "Die Tür der Einhausung ist geöffnet oder die elektrische Verbindung ist unterbrochen. Bitte schließen Sie die Tür oder schalten Sie die Maschine aus und stellen Sie elektrische Verbindung zur Umhausung wieder her. Falls es keine Einhausung gibt, schalten Sie die Türerkennung in den Maschineneinstellungen aus.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Die Kamera wurde noch nicht kalibriert. Bitte führen Sie zuerst die Kamerakalibrierung auf dem Touchscreen durch.", - "There are two types of origin mode.": "There are two types of origin mode.", + "There are two types of origin mode.": "Es gibt zwei Typen des Ursprungs-Modus.", "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.", - "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.", + "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Dieser Punkt (X0, Y0) ist der Ursprung des Design-Koordinatensystems und der Ursprung, der auf der Maschine positioniert oder gesetzt werden soll, muss mit diesem Punkt übereinstimmen.", "Tool Limiting": "Werkzeug-Limitierung", "Tool Type": "Werkzeug-Typ", - "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.", + "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Das Werkzeug-Modul wurde nicht erkannt. Bitte schalte die Maschine aus, überprüfe die Verbindung des Werkzeug-Moduls über das Verbindungskabel zum Controller und starte dann die Maschine erneut. Wenn das Problem weiterhin besteht, kontaktiere unseren Support für Hilfe.", "Toolhead not detected. Please power off the machine, plug the toolhead into the controller, and restart. If the problem persists, contact our Support for help.": "Das Werkzeug Modul wurde nicht erkannt. Bitte schalte die Maschine aus, überprüfe die Verbindungung des Werkzeug Moduls über das Verbindungskabel zum Controller und starte dann die Maschine erneut. Wenn das Problem weiterhin besteht, kontaktiere unseren Support für Hilfe.", "Top Layers": "Obere Schichten", "Top Skin Expand Distance": "Expansionsdistanz Außenhaut oben", @@ -875,15 +875,15 @@ "Tree Support Trunk Diameter": "Stammdurchmesser der Baumstützstruktur", "Tri-Hexagon": "Tri-Hexagon", "Triangles": "Dreiecke", - "Turn Off": "Turn Off", - "Turn On": "Turn On", + "Turn Off": "Ausschalten", + "Turn On": "Einschalten", "Ultimaker 2": "Ultimaker 2", "Unclassified": "Nicht klassifiziert", "Union Overlapping Volumes": "Union Überlappende Volumes", - "Upgrade": "Upgrade", - "Upgraded firmware successfully.": "Upgraded firmware successfully.", - "Upgrading": "Upgrading", - "Uploading": "Uploading", + "Upgrade": "Aktualisierung", + "Upgraded firmware successfully.": "Firmware erfolgreich aktualisiert.", + "Upgrading": "Aktualisiere", + "Uploading": "Lädt hoch", "Use Adaptive Layers": "Anpassschicht Verwenden", "Use Tab": "Reiter verwenden", "Use Towers": "Verwendung von Pfeilern", @@ -934,7 +934,7 @@ "Wall Transitioning Filter Margin": "Wandübergangsfilter Rand", "Wall Transitioning Threshold Angle": "Schwellenwinkel für Wandübergang", "Walls": "Wände", - "Wi-Fi Name": "Wi-Fi Name", + "Wi-Fi Name": "WLAN-Name", "Wipe Brush X Position": "Wipe Brush X Position", "Wipe Hop Speed": "Wipe Hop Speed", "Wipe Inactive Nozzle on Prime Tower": "Wischen Sie die inaktive Düse am Prime Tower ab", @@ -956,7 +956,7 @@ "X Endstop in Positive Direction": "X-Endstation in positiver Richtung", "X/Y overrides Z": "X/Y überschreibt Z", "Y Endstop in Positive Direction": "Y-Endschlag in positiver Richtung", - "Yes": "Yes", + "Yes": "Ja", "You need to manually move the toolhead to the desired XY work origin.": "Sie müssen das Werkzeug Modul manuell auf den gewünschten XY Arbeitsabschnitt verschieben.", "You need to use the Control panel to move the toolhead to the desired XY work origin.": "Sie müssen die Systemsteuerung benutzen, um das Werkzeug Modul auf eine gewünschten XY Arbeitsposition als Ursprung zu verschieben.", "Z Endstop in Positive Direction": "Z-Endstopp in positiver Richtung", @@ -983,7 +983,7 @@ "key-3DP/MainToolBar-Group": "Gruppieren", "key-3DP/MainToolBar-Model Simplify": "Vereinfachen", "key-3DP/MainToolBar-Model repair": "Reparatur", - "key-3DP/MainToolBar-Split": "Split", + "key-3DP/MainToolBar-Split": "Aufteilen", "key-3DP/MainToolBar-Ungroup": "Gruppierung aufheben", "key-App/Learn more about release notes please checkout": "Erfahren Sie mehr über Versionshinweise", "key-App/Menu-3-axis": "3-Achse", @@ -1077,7 +1077,7 @@ "key-App/Settings/MachineSettings-Laser": "Laser", "key-App/Settings/MachineSettings-Laser Toolhead": "Laser-Modul", "key-App/Settings/MachineSettings-Machine": "Gerät", - "key-App/Settings/MachineSettings-Modules": "Modules", + "key-App/Settings/MachineSettings-Modules": "Module", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Einzelner Extruder", "key-App/Settings/MachineSettings-Standard CNC": "Norm", "key-App/Settings/Model Examination": "Modellprüfung", @@ -1105,15 +1105,15 @@ "key-App/Update-Update": "Aktualisieren", "key-App/Update-Update Now": "Jetzt aktualisieren", "key-App/Update-Update Snapmaker Luban": "Snapmaker Luban aktualisieren", - "key-CaseResource/DownloadManager Clear": "Clear", + "key-CaseResource/DownloadManager Clear": "Löschen", "key-CaseResource/DownloadManager Download": "Download", - "key-CaseResource/DownloadManager Error": "Network error, please download again", - "key-CaseResource/DownloadManager Import to Luban": "Import to Luban", - "key-CaseResource/DownloadManager Open": "Open", - "key-CaseResource/DownloadManager Open File Explorer": "Open File Explorer", - "key-CaseResource/DownloadManager Open Folder": "Open Folder", - "key-CaseResource/MainToolBar-DownloadManager Download": "Library", - "key-CaseResource/Page-Back": "Back", + "key-CaseResource/DownloadManager Error": "Netzwerkfehler, bitte erneut herunterladen", + "key-CaseResource/DownloadManager Import to Luban": "In Luban importieren", + "key-CaseResource/DownloadManager Open": "Öffnen", + "key-CaseResource/DownloadManager Open File Explorer": "Dateimanager öffnen", + "key-CaseResource/DownloadManager Open Folder": "Ordner öffnen", + "key-CaseResource/MainToolBar-DownloadManager Download": "Bibliothek", + "key-CaseResource/Page-Back": "Zurück", "key-Cnc/Edit/ContextMenu-Arrange": "Anordnen", "key-Cnc/Edit/ContextMenu-Bring to Front": "Nach vorne bringen", "key-Cnc/Edit/ContextMenu-Close": "Schließen", @@ -1261,7 +1261,7 @@ "key-CncLaser/MainToolBar-Bottom": "Unten", "key-CncLaser/MainToolBar-Camera Capture": "Kameraerfassung", "key-CncLaser/MainToolBar-Disable STL 3D View": "STL 3D-Ansicht deaktivieren", - "key-CncLaser/MainToolBar-Distance": "Distance", + "key-CncLaser/MainToolBar-Distance": "Abstand", "key-CncLaser/MainToolBar-Enable STL 3D View": "STL 3D-Ansicht aktivieren", "key-CncLaser/MainToolBar-Home": "Startseite", "key-CncLaser/MainToolBar-Inverse Mask": "Inverse Mask", @@ -1272,10 +1272,10 @@ "key-CncLaser/MainToolBar-Remove Background": "Hintergrund entfernen", "key-CncLaser/MainToolBar-STL 3D View": "STL 3D-Ansicht", "key-CncLaser/MainToolBar-Save": "Speichern", - "key-CncLaser/MainToolBar-ShapeRepository": "Shape Library", + "key-CncLaser/MainToolBar-ShapeRepository": "Shape-Bibliothek", "key-CncLaser/MainToolBar-Top": "Oben", "key-CncLaser/MainToolBar-Undo": "Widerrufen", - "key-CncLaser/MainToolBar-Vector Tool": "Vector Tool", + "key-CncLaser/MainToolBar-Vector Tool": "Vektor Werkzeug", "key-CncLaser/MainToolBar-Workspace": "Arbeitsbereich", "key-CncLaser/ObjectList_Title-Object List": "Objektliste", "key-CncLaser/Preview-Preview Type": "Vorschau-Art", @@ -1318,8 +1318,8 @@ "key-CncLaser/TransformationSection-Size": "Größe", "key-Common/Clear": "Leeren", "key-Common/Clear All": "Alles leeren", - "key-Common/Config": "Config", - "key-Common/Notice": "Notice", + "key-Common/Config": "Konfiguration", + "key-Common/Notice": "Notiz", "key-Definition/Category-Retraction": "Rückzugskontrolle", "key-Definition/Category-dual": "Dual Druck", "key-Definition/Category-first_layer_optimization": "First-Layer-Optimierung", @@ -1362,7 +1362,7 @@ "key-HomePage/Begin-Video Tutorial": "Video-Anleitung", "key-HomePage/Begin-Work Area": "Arbeitsbereich", "key-HomePage/Begin-Workspace": "Arbeitsbereich", - "key-HomePage/CaseLibrary": "Case Library", + "key-HomePage/CaseLibrary": "Fall-Bibliothek", "key-HomePage/CaseLibrary-Fabric": "Gewebe", "key-HomePage/CaseLibrary-Feather": "Feder", "key-HomePage/CaseLibrary-Gift Box": "Geschenkbox", @@ -1373,7 +1373,7 @@ "key-HomePage/CaseLibrary-Luban Lock": "Luban Lock", "key-HomePage/CaseLibrary-Pen Holder": "Stift Halter", "key-HomePage/CaseLibrary-Phone Holder": "Telefonhalterung", - "key-HomePage/CaseLibrary-Quick Start": "Quick Start", + "key-HomePage/CaseLibrary-Quick Start": "Schnellstart", "key-HomePage/CaseLibrary-Sign": "Zeichen", "key-HomePage/CaseLibrary-Spiral Vase": "Spirale Vase", "key-HomePage/CaseLibrary-acrylic rhino jigsaw": "Acryl-Nashorn-Puzzle", @@ -1384,7 +1384,7 @@ "key-HomePage/CaseLibrary_title-3DP": "3DP", "key-HomePage/CaseLibrary_title-CNC": "CNC", "key-HomePage/CaseLibrary_title-Laser": "Laser", - "key-HomePage/CaseResource-More": "More", + "key-HomePage/CaseResource-More": "Weitere", "key-Laser/CamaeraCapture-Adjust area": "Bereich anpassen", "key-Laser/CamaeraCapture-Align the four corners of the blue quadrilateral with the engraved square.": "Richten Sie die vier Ecken des blauen Vierecks an dem eingravierten Quadrat aus.", "key-Laser/CamaeraCapture-Fine-tune the position of the four corners": "Die Position der vier Ecken einstellen (nach Auswahl des Punkts, Feintune die Richtung der Tastatur) so dass das Standard-Rechteck im Vorschaufeld mit dem Rechteck im Bild ausgerichtet ist", @@ -1460,9 +1460,9 @@ "key-Laser/LeftBar-Draw Done": "Fertig", "key-Laser/LeftBar-Draw Path": "Knoten bearbeiten", "key-Laser/LeftBar-Draw Path Done": "Fertig", - "key-Laser/LeftBar-Insert Shape": "Insert Shape", - "key-Laser/LeftBar-Online Libary": "Online Library", - "key-Laser/LeftBar-Online Libary Tip": "More graphics in the ", + "key-Laser/LeftBar-Insert Shape": "Form einfügen", + "key-Laser/LeftBar-Online Libary": "Online-Bibliothek", + "key-Laser/LeftBar-Online Libary Tip": "Mehr Grafiken in der", "key-Laser/Page-After the selected object is edited, click Create Toolpath to create a toolpath of the object. Below the Toolpath List are the parameters you often use.": "Nachdem das ausgewählte Objekt bearbeitet wurde, klicken Sie auf Werkzeugpfad erstellen, um einen Werkzeugpfad des Objekts zu erstellen. Unterhalb der Werkzeugpfadliste befinden sich die Parameter, die Sie häufig verwenden.", "key-Laser/Page-Alternatively, you can draw simple objects or add text for laser engrave or CNC carve.": "Alternativ können Sie auch einfache Objekte zeichnen oder Text für die Lasergravur oder CNC-Fräsung hinzufügen.", "key-Laser/Page-Click to generate and preview the G-code file.": "Klicken Sie, um die G-Code-Datei zu erstellen und in der Vorschau anzuzeigen.", @@ -1496,7 +1496,7 @@ "key-Laser/ProcessingModeSection/ConfigGreyscale-Algorithm": "Algorithmus", "key-Laser/ProcessingModeSection/ConfigGreyscale-Brightness": "Helligkeit", "key-Laser/ProcessingModeSection/ConfigGreyscale-Contrast": "Kontrast", - "key-Laser/ProcessingModeSection/ConfigGreyscale-Greyscale-Conversion": "Greyscale Conversion", + "key-Laser/ProcessingModeSection/ConfigGreyscale-Greyscale-Conversion": "Graustufen-Konvertierung", "key-Laser/ProcessingModeSection/ConfigGreyscale-Invert": "Invertieren", "key-Laser/ProcessingModeSection/ConfigGreyscale-Inverts the color of images, white becomes black, and black becomes white.": "Invertiert die Farbe von Abbildungen, weiß wird schwarz und schwarz wird weiß.", "key-Laser/ProcessingModeSection/ConfigGreyscale-Select an algorithm for image processing.": "Wählen Sie einen Algorithmus für die Bildverarbeitung.", @@ -1538,7 +1538,7 @@ "key-Laser/ToolpathParameters-Material": "Materialien", "key-Laser/ToolpathParameters-Method": "Methode", "key-Laser/ToolpathParameters-Name": "Name", - "key-Laser/ToolpathParameters-Optimization": "Optimization", + "key-Laser/ToolpathParameters-Optimization": "Optimierung", "key-Laser/ToolpathParameters-Power": "Strom", "key-Laser/ToolpathParameters-Repetition": "Bestanden", "key-Laser/ToolpathParameters-Speed": "Tempo", @@ -1597,7 +1597,7 @@ "key-Modal/Common-Complete": "Vollständig", "key-Modal/Common-Confirm": "Bestätigen", "key-Modal/Common-Do not ask me again": "Nicht erneut nachfragen", - "key-Modal/Common-Done": "Done", + "key-Modal/Common-Done": "Fertig", "key-Modal/Common-Ignore": "Ignorieren", "key-Modal/Common-Next": "Weiter", "key-Modal/Common-OK": "OK", @@ -1616,7 +1616,7 @@ "key-Printing/3DP-Scale to fit successfully.": "Skalieren erfolgreich angepasst.", "key-Printing/3DP-scale to fit failed.": "Skalierung fehlgeschlagen.", "key-Printing/Beginner Guide-Object List Introduction": "Leitfaden Objektliste Einführung", - "key-Printing/Common-Failed to rename. Please enter a new name.": "Failed to rename. Please enter a new name.", + "key-Printing/Common-Failed to rename. Please enter a new name.": "Umbenennung fehlgeschlagen. Bitte geben Sie einen neuen Namen ein.", "key-Printing/ContextMenu-Assign model to left extruder": "Modell dem linken Extruder zuweisen", "key-Printing/ContextMenu-Assign model to right extruder": "Modell dem rechten Extruder zuweisen", "key-Printing/ContextMenu-Auto Arrange": "Automatisch anordnen", @@ -1711,12 +1711,12 @@ "key-Printing/MainToolBar-Print Settings": "Druck Einstell.", "key-Printing/MeshEdit-BrushType-SmartFill-Intro": "Depending on the angle of the triangles in the clicked area, select triangles with a range of angular tolerances around the connection.", "key-Printing/MeshEdit-BrushType-SmartFillBrush": "Smart Fill", - "key-Printing/MeshEdit-BrushType-SphereBrush": "Brush", + "key-Printing/MeshEdit-BrushType-SphereBrush": "Pinsel", "key-Printing/MeshEdit-BrushType-SphereBrush-Intro": "Triangles are selected based on the triangles and angular tolerances that the spherical brushes come in contact with. Smaller angle tolerances detect sharp borders, allowing the brush to paint only the area within the edge. The opposite is true for larger angles, where a 90° tolerance allows the brush to recede to select all triangles touched by all spherical brushes.", - "key-Printing/MeshEdit-Color Select": "Color Select", + "key-Printing/MeshEdit-Color Select": "Farbauswahl", "key-Printing/MeshEdit-Mesh Coloring": "Mesh Painting", - "key-Printing/MeshEdit-Method": "Method", - "key-Printing/MeshEdit-Tolerance": "Tolerance", + "key-Printing/MeshEdit-Method": "Methode", + "key-Printing/MeshEdit-Tolerance": "Toleranz", "key-Printing/Modal-Backup Tip": "Your historical data is backed up in the <1>here folder.", "key-Printing/No model(s).": "Keine Modell(e).", "key-Printing/ObjectList-Object List": "Objektliste", @@ -1834,18 +1834,18 @@ "key-Progress/3DP-Failed to calculate Rotation.": "Die Rotation konnte nicht berechnet werden.", "key-Progress/3DP-Failed to generate support.": "Fehler beim Erstellen des Supports.", "key-Progress/3DP-Failed to load model.": "Laden des Modells fehlgeschlagen.", - "key-Progress/3DP-Failed to prepare mesh painting.": "Failed to prepare mesh painting.", + "key-Progress/3DP-Failed to prepare mesh painting.": "Fehler bei der Vorbereitung des Mesh Painting.", "key-Progress/3DP-Failed to preview G-code.": "Vorschau des G-Code fehlgeschlagen.", "key-Progress/3DP-Failed to repair model.": "Fehler beim Reparieren des Modells.", - "key-Progress/3DP-Failed to split model.": "Failed to split model.", + "key-Progress/3DP-Failed to split model.": "Fehler beim Aufteilen des Modells.", "key-Progress/3DP-Generated support successfully.": "Support erfolgreich generiert.", "key-Progress/3DP-Generating support... {{progress}}%": "Erstelle Support... {{progress}}%", "key-Progress/3DP-GrayUnderTheTopFloor": "Top Layer-Ansicht", "key-Progress/3DP-Loaded model successfully.": "Das Modell wurde erfolgreich geladen.", "key-Progress/3DP-Loading model...{{progress}}%": "Modell wird geladen...{{progress}}%", "key-Progress/3DP-Ordinary": "Globale Ansicht", - "key-Progress/3DP-Prepare successfully.": "Prepare successfully.", - "key-Progress/3DP-Preparing Mesh Painting...": "Preparing Mesh Painting...", + "key-Progress/3DP-Prepare successfully.": "Vorbereitungen erfolgreich.", + "key-Progress/3DP-Preparing Mesh Painting...": "Mesh Painting wird vorbereitet...", "key-Progress/3DP-Previewed G-code successfully.": "Die Vorschau des G-Code war erfolgreich.", "key-Progress/3DP-Previewing G-code...{{progress}}%": "Vorschau des G-Code...{{progress}}%", "key-Progress/3DP-Repair model successfully.": "Modell erfolgreich repariert.", @@ -1855,15 +1855,15 @@ "key-Progress/3DP-SingleLayer": "Einzel-Charakter-Ansicht", "key-Progress/3DP-Slice Failed": "Slice fehlgeschlagen", "key-Progress/3DP-Slice Failed reason": "Mögliche Gründe: 1. Die Slicing-Engine unterstützt Ihr System nicht, bitte überprüfen Sie, ob Ihr System unterstützt wird; 2. Abnormale Parametereinstellungen.", - "key-Progress/3DP-Split model successfully.": "Split model successfully.", - "key-Progress/3DP-Splitting model...": "Splitting model...", + "key-Progress/3DP-Split model successfully.": "Modell erfolgreich aufgeteilt.", + "key-Progress/3DP-Splitting model...": "Modell wird aufgeteilt...", "key-Progress/Laser-Failed to load model.": "Laden des Modells fehlgeschlagen", "key-Progress/Laser-Loaded model successfully.": "Das Modell wurde erfolgreich geladen.", "key-Progress/Laser-Loading model...": "Modell wird geladen...", "key-Progress/LaserCNC-Failed to generate simulation.": "Die Simulation ist fehlgeschlagen.", "key-Progress/LaserCNC-Failed to generate toolpath and preview.": "Das Erstellen des Werkzeugpfads und die Vorschau ist fehlgeschlagen.", "key-Progress/LaserCNC-Failed to load object.": "Das Laden des Objekts ist fehlgeschlagen.", - "key-Progress/LaserCNC-Failed to process SVG.": "Failed to process SVG.", + "key-Progress/LaserCNC-Failed to process SVG.": "SVG konnte nicht verarbeitet werden.", "key-Progress/LaserCNC-Failed to process object.": "Die Bearbeitung des Objekts ist fehlgeschlagen.", "key-Progress/LaserCNC-Generate toolpath and preview: {{progress}}%": "Werkzeugpfad und Vorschau erstellen: {{progress}}%", "key-Progress/LaserCNC-Generated simulation successfully.": "Die Simulation wurde erfolgreich erstellt.", @@ -1872,8 +1872,8 @@ "key-Progress/LaserCNC-Loaded object successfully.": "Das Objekt wurde erfolgreich geladen.", "key-Progress/LaserCNC-Loading object {{progress}}%": "Das Objekt wird geladen {{progress}}%", "key-Progress/LaserCNC-Processed object successfully.": "Das Objekt wurde erfolgreich verarbeitet.", - "key-Progress/LaserCNC-Processing SVG successfully.": "Processing SVG successfully.", - "key-Progress/LaserCNC-Processing SVG {{progress}}%": "Processing SVG {{progress}}%", + "key-Progress/LaserCNC-Processing SVG successfully.": "SVG wurde erfolgreich verarbeitet.", + "key-Progress/LaserCNC-Processing SVG {{progress}}%": "SVG wird verarbeitet: {{progress}}%", "key-Progress/LaserCNC-Processing object {{progress}}%": "Das Objekt wird verarbeitet {{progress}}%", "key-Project/Resume-Cancel": "Abbrechen", "key-Project/Resume-Resume": "Fortsetzen", @@ -1882,7 +1882,7 @@ "key-Project/Save-Cancel": "Abbrechen", "key-Project/Save-Save": "Speichern", "key-Project/Save-Save the changes you made in the {{headType}} G-code Generator? Your changes will be lost if you don’t save them.": "Die Änderungen, die Sie im {{headType}} G-Code-Generator erstellten, speichern? Ihre Änderungen werden verworfen, wenn Sie sie nicht speichern.", - "key-SVGClipping/Background": "Background", + "key-SVGClipping/Background": "Hintergrund", "key-SVGClipping/Clip": "Clip", "key-SVGClipping/Offset": "Offset", "key-SVGClipping/Ringing": "Ringing", @@ -1899,12 +1899,12 @@ "key-StackedModel/Import-Model Size": "Modell-Größe", "key-StackedModel/Import-Preview Stacked Model": "Vorschau des gestapelten Modells", "key-StackedModel/Import-Sheets": "Anzahl der Lagen", - "key-SvgShapeLibrary/All": "All", - "key-SvgShapeLibrary/Category": "Category", - "key-SvgShapeLibrary/Page-Back": "Back", - "key-Term/Object": "Object", - "key-Term/Workpiece": "Workpiece", - "key-Term/Workpiece Size": "Workpiece Size", + "key-SvgShapeLibrary/All": "Alle", + "key-SvgShapeLibrary/Category": "Kategorie", + "key-SvgShapeLibrary/Page-Back": "Zurück", + "key-Term/Object": "Objekt", + "key-Term/Workpiece": "Werkstück", + "key-Term/Workpiece Size": "Bauteilgröße", "key-Widget/CommonDropdownButton-Collapse": "Kollabieren", "key-Widget/CommonDropdownButton-Enter Full Screen": "Vollbildmodus aktivieren", "key-Widget/CommonDropdownButton-Exit Full Screen": "Vollbildmodus beenden", @@ -1919,7 +1919,7 @@ "key-Workspace/Connection-Connect": "Verbinden", "key-Workspace/Connection-Connected": "Verbunden", "key-Workspace/Connection-Connection": "Verbindung", - "key-Workspace/Connection-Connection Failed": "Connection Failed", + "key-Workspace/Connection-Connection Failed": "Verbindung fehlgeschlagen", "key-Workspace/Connection-Connection failed. The target machine actively refused your connection. Please check if the input IP address is correct.": "Verbindung fehlgeschlagen. Der Zielcomputer hat Ihre Verbindung aktiv abgelehnt. Bitte überprüfen Sie, ob die eingegebene IP-Adresse korrekt ist.", "key-Workspace/Connection-Connection timed out. Please check your network settings.": "Zeitüberschreitung der Verbindung. Bitte überprüfen Sie Ihre Netzwerkeinstellungen.", "key-Workspace/Connection-Disconnect": "Trennen", @@ -1937,7 +1937,7 @@ "key-Workspace/Connection-No ports available.": "Keine Anschlüsse verfügbar.", "key-Workspace/Connection-Nozzle Temp.": "Düsen-Temp.", "key-Workspace/Connection-OK": "OK", - "key-Workspace/Connection-Quick Swap Kit": "Quick Swap Kit", + "key-Workspace/Connection-Quick Swap Kit": "Schnellwechsel-Kit", "key-Workspace/Connection-Reason: The machine may be using an older version of firmware or may have other devices connected.": "Verbindung fehlgeschlagen. Das Gerät wurde mit einem anderen Gerät verbunden.", "key-Workspace/Connection-Refresh": "Aktualisieren", "key-Workspace/Connection-Screen Authorization Needed": "Bildschirm-Genehmigung erforderlich", @@ -1946,7 +1946,7 @@ "key-Workspace/Connection-TOOLHEAD_CNC_1": "CNC", "key-Workspace/Connection-TOOLHEAD_LASER_1": "1,6W-Laser", "key-Workspace/Connection-TOOLHEAD_LASER_2": "10W-Laser", - "key-Workspace/Connection-The laser function is locked, please go to the screen to unlock it.": "The laser function is locked, please go to the screen to unlock it.", + "key-Workspace/Connection-The laser function is locked, please go to the screen to unlock it.": "Die Laserfunktion ist gesperrt. Bitte gehen Sie zum Bildschirm, um sie zu entsperren.", "key-Workspace/Connection-The machine or toolhead cannot be correctly recognized. Make sure the firmware is up to date and the machine is wired correctly.": "Die Maschine oder der Werkzeugkopf kann nicht richtig erkannt werden. Stellen Sie sicher, dass die Firmware auf dem neuesten Stand ist und die Maschine richtig verkabelt ist.", "key-Workspace/Connection-To continue, the machine needs to return to the start position of the X, Y, and Z axes.": "Um fortzufahren, muss der Werkzeugkopf in die Startposition der X-, Y- und Z-Achse zurückkehren.", "key-Workspace/Connection-Unknown": "Unbekannt", @@ -2002,7 +2002,7 @@ "key-Workspace/Enclosure-Door Detection": "Tür-Erkennung", "key-Workspace/Enclosure-Enclosure": "Gehäuse", "key-Workspace/Enclosure-Exhaust Fan": "Abluftventilator", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennungsfunktion deaktivieren, wird Ihr Auftrag nicht unterbrochen, wenn eine oder beiden Türen geöffnet wird/werden.", "key-Workspace/Enclosure-LED Strips": "LED-Streifen", "key-Workspace/Fine-tuneWorkOrigin-Close": "Schließen", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Bestimmt, wie schnell sich das Gerät bewegt, wenn es sich in Betrieb befindet.", @@ -2040,7 +2040,7 @@ "key-Workspace/GcodeInspect-in": "in", "key-Workspace/GcodeInspect-mm": "mm", "key-Workspace/High CNC": "200W CNC", - "key-Workspace/Input password": "Input password", + "key-Workspace/Input password": "Passwort eingeben", "key-Workspace/Laser-high_power_tips": "Die Laserleistung wird beim Einschalten des Lasers auf das Minimum eingestellt.", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "Im Auto-Modus führt das Gerät einen Autofokus entsprechend der von Ihnen eingegebenen Materialdicke aus und startet den Auftrag.<1>Im manuellen Modus verwendet das Gerät den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<3>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "Materialdicke", @@ -2056,7 +2056,7 @@ "key-Workspace/LaserStartJob-semi_auto_mode": "Materialdicke eingeben", "key-Workspace/LaserStartJob-semi_auto_mode_description": "Messen und geben Sie die Materialdicke ein, die Maschine wird die Laserhöhe entsprechend einstellen.", "key-Workspace/LaserStartJob-start_job": "Auftrag starten", - "key-Workspace/Machine not connected, please connect to the machine first.": "Machine not connected, please connect to the machine first.", + "key-Workspace/Machine not connected, please connect to the machine first.": "Maschine nicht verbunden, bitte diese zuerst mit dem Rechner verbinden.", "key-Workspace/MachineSelectModal-Device Not Recognized": "Das Gerät wird nicht erkannt", "key-Workspace/MachineSelectModal-Select": "Auswählen", "key-Workspace/MachineSelectModal-Select the machine model that is connected to Luban": "Wählen Sie das Gerätemodell, das mit Luban verbunden ist", @@ -2133,7 +2133,7 @@ "key-Workspace/Transport-Export": "Exportieren", "key-Workspace/Transport-Import": "Importieren", "key-Workspace/Transport-Preview": "Vorschau", - "key-Workspace/Upload Job": "Upload Job", + "key-Workspace/Upload Job": "Auftrag hochladen", "key-Workspace/WifiTransport-Failed to measure thickness.": "Fehler beim Messen der Dicke.", "key-Workspace/WifiTransport-Failed to send file.": "Senden der Datei ist fehlgeschlagen.", "key-Workspace/WifiTransport-File sent successfully.": "Datei erfolgreich gesendet.", From 0bd1229e240ec5c780b99a8789599cd175635c22 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 2 Dec 2023 05:12:31 +0800 Subject: [PATCH 03/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 5eaf1149cf..b37da377ed 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -29,7 +29,7 @@ "Anti-ooze Retraction Speed": "Швидкість втягування для запобігання витоку", "Are you sure you want to stop the print job?": "Ви впевнені, що хочете зупинити друк?", "Auto Temperature": "Автоматичне регулювання температури", - "Air Assist Pump": "Допоміжний повітряний насос", + "Air Assist Pump": "Допоміжна повітряна помпа", "Avoid Printed Parts When Traveling": "Оминати надруковані частини під час пересування", "Avoid Supports When Traveling": "Оминати опори під час пересування", "Back": "Ззаду", From 267e7c17110da61d37aefc7ff6e549d3c2e73457 Mon Sep 17 00:00:00 2001 From: parachvte Date: Mon, 8 Jan 2024 02:24:00 +0800 Subject: [PATCH 04/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index e3aa018690..7958c9cceb 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -450,7 +450,7 @@ "Maximum Speed for Flow Equalization": "Maximale Geschwindigkeit für Flussgleichung", "Maximum Tower-Supported Diameter": "Maximaler Durchmesser für Stützpfeiler", "Maximum Travel Resolution": "Maximale Reisedauer", - "Merged": "Merged", + "Merged": "Verknüpft", "Merged Meshes Overlap": "Überlappung zusammengeführte Netze", "Mesh Fixes": "Netzreparaturen", "Mesh Position X": "Netzposition X", @@ -658,7 +658,7 @@ "Select the slicing mode of the mesh toolpath": "Wählen Sie den Schnittmodus für den Maschenwerkzeugspfad", "Select the way that the dots are arranged.\n- Line: Dots are arranged into lines.\n- Round: Dots are arranged into rounds.\n- Diamond: Dots are arranged into diamonds.": "Wählen Sie die Art und Weise, wie die Punkte angeordnet sind.\n- Linie: Punkte sind in Linien angeordnet.\n- Runde: Punkte sind in Runden angeordnet.\n- Diamond: Punkte sind in Diamanten angeordnet.", "Sending file. Please wait… {{ progress }}%": "Datei wird gesendet. Bitte warten Sie…{{ progress }}%", - "Separate": "Separate", + "Separate": "Trennen", "Set Luban render color.": "Materialfarbe.", "Set Origin Mode": "Ursprungs-Modus festlegen", "Set how many times the laser will trace the same path in a G-code file.": "Stellen Sie ein, wie oft der Laser denselben Pfad in einer G-Code-Datei verfolgen soll.", @@ -829,7 +829,7 @@ "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "Die Tür der Einhausung ist geöffnet oder die elektrische Verbindung ist unterbrochen. Bitte schließen Sie die Tür oder schalten Sie die Maschine aus und stellen Sie elektrische Verbindung zur Umhausung wieder her. Falls es keine Einhausung gibt, schalten Sie die Türerkennung in den Maschineneinstellungen aus.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Die Kamera wurde noch nicht kalibriert. Bitte führen Sie zuerst die Kamerakalibrierung auf dem Touchscreen durch.", "There are two types of origin mode.": "Es gibt zwei Typen des Ursprungs-Modus.", - "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.", + "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "Es gibt zwei Ursprungsversatz Modi: Fadenkreuz und Laserschussmodus. Für die meisten Fälle empfehlen wir den Fadenkreuz-Modus, er ist sicherer und einfacher zu bedienen. Der Laserschussmodus wird nur empfohlen, wenn eine vollwertige Bearbeitung erforderlich ist.", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Dieser Punkt (X0, Y0) ist der Ursprung des Design-Koordinatensystems und der Ursprung, der auf der Maschine positioniert oder gesetzt werden soll, muss mit diesem Punkt übereinstimmen.", "Tool Limiting": "Werkzeug-Limitierung", "Tool Type": "Werkzeug-Typ", @@ -1249,7 +1249,7 @@ "key-CncLaser/JobSetup-Locking block position": "Blockposition wird gesperrt", "key-CncLaser/JobSetup-Locking block position A": "Position A", "key-CncLaser/JobSetup-Locking block position B": "Position B", - "key-CncLaser/JobSetup-Origin Mode": "Origin Mode", + "key-CncLaser/JobSetup-Origin Mode": "Ursprungsmodus", "key-CncLaser/JobSetup-Origin Position": "Ursprung Position", "key-CncLaser/JobSetup-Top": "Oben", "key-CncLaser/JobSetup-Top Left": "Oben links", @@ -1710,7 +1710,7 @@ "key-Printing/MainToolBar-Materials": "Filament", "key-Printing/MainToolBar-Print Settings": "Druck Einstell.", "key-Printing/MeshEdit-BrushType-SmartFill-Intro": "Depending on the angle of the triangles in the clicked area, select triangles with a range of angular tolerances around the connection.", - "key-Printing/MeshEdit-BrushType-SmartFillBrush": "Smart Fill", + "key-Printing/MeshEdit-BrushType-SmartFillBrush": "Intelligentes Füllen", "key-Printing/MeshEdit-BrushType-SphereBrush": "Pinsel", "key-Printing/MeshEdit-BrushType-SphereBrush-Intro": "Triangles are selected based on the triangles and angular tolerances that the spherical brushes come in contact with. Smaller angle tolerances detect sharp borders, allowing the brush to paint only the area within the edge. The opposite is true for larger angles, where a 90° tolerance allows the brush to recede to select all triangles touched by all spherical brushes.", "key-Printing/MeshEdit-Color Select": "Farbauswahl", @@ -2081,7 +2081,7 @@ "key-Workspace/Macro-Repeat": "Wiederholen", "key-Workspace/Macro-Run Macro": "Makro ausführen", "key-Workspace/Macro-Save": "Speichern", - "key-Workspace/MainToolBar-Machine Network": "Machine Network", + "key-Workspace/MainToolBar-Machine Network": "Maschinennetz", "key-Workspace/Marlin-Actual Data Title": "Aktuell", "key-Workspace/Marlin-Heated Bed Temp": "Heizbett Temp", "key-Workspace/Marlin-Left Nozzle Temp": "Linke Düsen temp", From 91df9120cb815de513a1103db4922d6eeb0dc84e Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 9 Jan 2024 02:20:16 +0800 Subject: [PATCH 05/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 26 ++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 7958c9cceb..4b12abbbcb 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -75,7 +75,7 @@ "Brim Only on Outside": "Brim nur an Außenseite", "Brim Replaces Support": "Brim ersetzt die Stützstruktur", "Brim Width": "Brim Breite", - "Bug fixes": "Behebung von Bugs", + "Bug fixes": "Fehlerbehebungen", "Build Plate Adhesion": "Druckplattenhaftung", "Build Plate Adhesion Extruder": "Druckbetthaftung für Extruder", "Build Plate Adhesion Type": "Druckplattenhaftung Typ", @@ -156,8 +156,8 @@ "Dual Extrusion Helper Type": "Dual Druck Helfertyp", "Dwell Time": "Verweilzeit", "Elliptic": "Elliptisch", - "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Notfallstopp. Bitte stellen Sie sicher, dass keine Gefahr besteht und starten Sie die Maschine nach dem Rücksetzen des Notfall-Stopp-Schalters neu.", - "Emergency stop button triggered": "Notfall-Stop-Schalter ausgelöst", + "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Not-Halt. Bitte stellen Sie sicher, dass keine Gefahr besteht und starten Sie die Maschine nach dem Entriegeln des Not-Halt-Schalters neu.", + "Emergency stop button triggered": "Not-Halt-Schalter betätigt", "Enable Acceleration Control": "Beschleunigungssteuerung aktivieren", "Enable Bridge Settings": "Brückeneinstellungen aktivieren", "Enable Coasting": "Coasting aktivieren", @@ -198,7 +198,7 @@ "Everywhere": "Überall", "Exclusive": "Exklusiv", "Experimental": "Experimentelle", - "Export": "Export", + "Export": "Exportieren", "Export log successfully.": "Log erfolgreich exportiert.", "Export machine log to SD card.": "Exportiere die Maschinenlogdatei auf SD-Karte.", "Export the G-code file to a local device or load it to Workspace.": "Exportieren Sie die G-Code-Datei auf ein lokales Gerät oder laden Sie sie in den Workspace.", @@ -364,8 +364,8 @@ "Ironing Pattern": "Glättungsmuster", "Ironing Speed": "Glättungsgeschwindigkeit", "Is Center Origin": "Ursprung zentrieren", - "Job Offset": "Job Offset", - "Job Offset Mode": "Job Offset Mode", + "Job Offset": "Auftrags Offset", + "Job Offset Mode": "Auftrags Offset Modus", "Jog Height": "Jog-Höhe", "Jog Speed": "Jog-Tempo", "Keep Disconnected Faces": "Keep Disconnected Faces", @@ -410,7 +410,7 @@ "Machine Height": "Maschinenhöhe", "Machine Log": "Maschinen-Log", "Machine Maximum Print Temperature": "Maximale Drucktemperatur des Geräts", - "Machine Network": "Machine Network", + "Machine Network": "Maschinennetz", "Machine Settings": "Maschineneinstellungen", "Machine Type": "Maschinen Typ", "Machine Width": "Maschinenbreite", @@ -890,7 +890,7 @@ "Use tabs to hold the pieces in place.": "Verwenden Sie Reiter, um die Teile zu fixieren.", "User Specified": "Benutzerdefiniert", "V-bit": "V-shaped Tip", - "Variable Line": "Variable Line", + "Variable Line": "Variable Linie", "Vase": "Vase", "Vertical": "Vertikal", "Vertical Scaling Factor Shrinkage Compensation": "Vertikale Skalierungsfaktor Schrumpfung", @@ -1264,10 +1264,10 @@ "key-CncLaser/MainToolBar-Distance": "Abstand", "key-CncLaser/MainToolBar-Enable STL 3D View": "STL 3D-Ansicht aktivieren", "key-CncLaser/MainToolBar-Home": "Startseite", - "key-CncLaser/MainToolBar-Inverse Mask": "Inverse Mask", + "key-CncLaser/MainToolBar-Inverse Mask": "Maske invertieren", "key-CncLaser/MainToolBar-Job Setup": "Auftrag einrichten", - "key-CncLaser/MainToolBar-Mask": "Mask", - "key-CncLaser/MainToolBar-Operation": "Operation", + "key-CncLaser/MainToolBar-Mask": "Maskieren", + "key-CncLaser/MainToolBar-Operation": "Betrieb", "key-CncLaser/MainToolBar-Redo": "Erneut ausführen", "key-CncLaser/MainToolBar-Remove Background": "Hintergrund entfernen", "key-CncLaser/MainToolBar-STL 3D View": "STL 3D-Ansicht", @@ -1530,7 +1530,7 @@ "key-Laser/ProcessingModeSection/ImageProcessMode-Processing Mode": "Verarbeitungsmodus", "key-Laser/ProcessingModeSection/ImageProcessMode-VECTOR": "VEKTOR", "key-Laser/ToolManger/ProfileCreator-Select material type": "Materialart auswählen", - "key-Laser/ToolpathParameters-Assist Gas": "Assist Gas", + "key-Laser/ToolpathParameters-Assist Gas": "Hilfsgas", "key-Laser/ToolpathParameters-Choose profile": "Profil auswählen", "key-Laser/ToolpathParameters-Create profile with current parameters": "Profil mit aktuellen Parametern erstellen.", "key-Laser/ToolpathParameters-Enter the toolpath name.": "Geben Sie den Namen des Werkzeugpfads ein.", @@ -1886,7 +1886,7 @@ "key-SVGClipping/Clip": "Clip", "key-SVGClipping/Offset": "Offset", "key-SVGClipping/Ringing": "Ringing", - "key-SVGClipping/Union": "Union", + "key-SVGClipping/Union": "Verbindung", "key-Settings/Create Material Tips": "Geben Sie die grundlegenden Materialeigenschaften ein und Luban generiert empfohlene Einstellungen für Sie.", "key-Settings/Nozazle-Add": "Düse Hinzufügen", "key-Settings/Select Machine": "Gerät Auswählen", From 7502abd1460d2de639d51b3bbfe044fc6f8b3532 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 17 Jan 2024 10:22:28 +0800 Subject: [PATCH 06/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 4b12abbbcb..ff3f870bbc 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -120,7 +120,7 @@ "Cross Infill Density Image": "Querfülldichte Bild", "Crosshair": "Fadenkreuz", "Crosshair Offset": "Fadenkreuz Versatz", - "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.": "Der Fadenkreuz-Modus verwendet das Fadenkreuz zur Positionierung, während der Laser-Punkt-Modus den Arbeitslaser zur Positionierung verwendet.", + "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.": "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.", "Crystalline Material": "Kristallines Material", "Cubic": "Kubisch", "Cubic Subdivision": "Kubische Unterteilung", @@ -829,7 +829,7 @@ "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "Die Tür der Einhausung ist geöffnet oder die elektrische Verbindung ist unterbrochen. Bitte schließen Sie die Tür oder schalten Sie die Maschine aus und stellen Sie elektrische Verbindung zur Umhausung wieder her. Falls es keine Einhausung gibt, schalten Sie die Türerkennung in den Maschineneinstellungen aus.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Die Kamera wurde noch nicht kalibriert. Bitte führen Sie zuerst die Kamerakalibrierung auf dem Touchscreen durch.", "There are two types of origin mode.": "Es gibt zwei Typen des Ursprungs-Modus.", - "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "Es gibt zwei Ursprungsversatz Modi: Fadenkreuz und Laserschussmodus. Für die meisten Fälle empfehlen wir den Fadenkreuz-Modus, er ist sicherer und einfacher zu bedienen. Der Laserschussmodus wird nur empfohlen, wenn eine vollwertige Bearbeitung erforderlich ist.", + "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Dieser Punkt (X0, Y0) ist der Ursprung des Design-Koordinatensystems und der Ursprung, der auf der Maschine positioniert oder gesetzt werden soll, muss mit diesem Punkt übereinstimmen.", "Tool Limiting": "Werkzeug-Limitierung", "Tool Type": "Werkzeug-Typ", From 0180df398cef130255e0d1bc10d0aeecdadbfc04 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 17 Jan 2024 10:22:30 +0800 Subject: [PATCH 07/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index d6e0bd7956..c1095c65f1 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -120,7 +120,7 @@ "Cross Infill Density Image": "Cross Infill Density Image", "Crosshair": "Crosshair", "Crosshair Offset": "Crosshair Offset", - "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.": "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.", + "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.": "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.", "Crystalline Material": "Crystalline Material", "Cubic": "Cubo", "Cubic Subdivision": "Suddivisione cubica", @@ -829,7 +829,7 @@ "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "La fotocamera non è stata ancora calibrata. Si prega di eseguire prima la calibrazione della fotocamera sul touchscreen.", "There are two types of origin mode.": "There are two types of origin mode.", - "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.", + "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.", "Tool Limiting": "Tool Limiting", "Tool Type": "Tool Type", From 97641ec7904c039190a4a3c04abe432b1d522e8c Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 17 Jan 2024 10:22:31 +0800 Subject: [PATCH 08/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index b37da377ed..8a0c704900 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -120,7 +120,7 @@ "Cross Infill Density Image": "Щільності візерунка заливки хреста", "Crosshair": "Перехрестя", "Crosshair Offset": "Зміщення перехрестя", - "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.": "Режим Перехрестя використовує перехрестя для позиціювання, в той час, як режим Світлової точки використовує лазер для цього.", + "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.": "Режим Перехрестя використовує перехрестя для позиціювання, в той час, як режим Світлової точки використовує лазер для цього.", "Crystalline Material": "Кристалічний матеріал", "Cubic": "Кубічний", "Cubic Subdivision": "Кубічні секції", @@ -829,7 +829,7 @@ "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "Двері захисного боксу відчинені або він відʼєднаний. Закрийте двері або вимкніть пристрій та наново підʼєднайте захисний бокс. Якщо у вас немає захисного боксу вимкніть детекцію відчинення дверцят в налаштуваннях пристрою.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Камера досі не відкалібрована. Виконайте калібрацію камери скориставшись панеллю керування на пристрої.", "There are two types of origin mode.": "Є два типи режимів налаштування точки відліку.", - "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "Існує два типи режимів зміщення точки відліку: режим перехрестя та режим світлової точки. У більшості випадків ми рекомендуємо використовувати режим перехрестя, це безпечніше та простіше у використанні. Режим світлової точки рекомендується лише тоді, коли потрібна повна потужність лазера.", + "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "Існує два типи режимів зміщення точки відліку: режим перехрестя та режим світлової точки. У більшості випадків ми рекомендуємо використовувати режим перехрестя, це безпечніше та простіше у використанні. Режим світлової точки рекомендується лише тоді, коли потрібна повна потужність лазера.", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Ця точка (X0, Y0) є точкою відліку вашого проєкту. Початок системи координат, який потрібно встановити на пристрої, має збігатися з цією точкою.", "Tool Limiting": "Обмеження інструментів", "Tool Type": "Тип інструментів", From d1f223ba13c2935144331cc2c320d8c046ce7e53 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 17 Jan 2024 10:22:32 +0800 Subject: [PATCH 09/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index 2a73d64cc9..c443c180b8 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -120,7 +120,7 @@ "Cross Infill Density Image": "交叉加密图像密度", "Crosshair": "十字光", "Crosshair Offset": "十字光偏移", - "Crosshair mode uses the crosshair for positioning, while Laser shot mode uses the working laser for positioning.": "十字光模式使用十字光进行定位，而弱光模式使用工作激光进行定位。", + "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.": "十字光模式使用十字光进行定位，而弱光模式使用工作激光进行定位。", "Crystalline Material": "晶体材料", "Cubic": "立方体", "Cubic Subdivision": "立方分区", @@ -829,7 +829,7 @@ "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "摄像头尚未校准。请先在触控屏上进行摄像头校准。", "There are two types of origin mode.": "原点模式有两种。", - "There are two types of origin offset modes: crosshair mode and laser shot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser shot mode is only recommended when full-stroke machining is required.": "原点偏移模式有十字光模式和弱光模式两种。在大多数情况下，我们建议使用十字光模式，它会更加安全和易用。弱光模式仅建议在需要全行程加工时被使用。", + "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "原点偏移模式有十字光模式和弱光模式两种。在大多数情况下，我们建议使用十字光模式，它会更加安全和易用。弱光模式仅建议在需要全行程加工时被使用。", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "该点 (X0, Y0) 是设计坐标系的原点，在机器上定位或设置的原点需要和该点重合。", "Tool Limiting": "加工效果", "Tool Type": "刀具类型", From 28ac23499c8f3a804ee2f49222f6fb61c749133c Mon Sep 17 00:00:00 2001 From: parachvte Date: Sun, 4 Feb 2024 22:26:31 +0800 Subject: [PATCH 10/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index ff3f870bbc..a8b98ee606 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -92,7 +92,7 @@ "Coasting Speed": "Coasting-Geschwindigkeit", "Coasting Volume": "Coasting-Volumen", "Color": "Farbe", - "Color Slicing": "Color Slicing", + "Color Slicing": "Farbiges Slicen", "Combing Mode": "Combing-Modus", "Command Line Settings": "Einstellungen Befehlszeile", "Compensate": "Kompensieren", @@ -120,7 +120,7 @@ "Cross Infill Density Image": "Querfülldichte Bild", "Crosshair": "Fadenkreuz", "Crosshair Offset": "Fadenkreuz Versatz", - "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.": "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.", + "Crosshair mode uses the crosshair for positioning, while Laser Spot mode uses the working laser for positioning.": "Der Fadenkreuz-Modus verwendet das Fadenkreuz zur Positionierung, während der Laser-Punkt-Modus den Arbeitslaser zur Positionierung verwendet.", "Crystalline Material": "Kristallines Material", "Cubic": "Kubisch", "Cubic Subdivision": "Kubische Unterteilung", @@ -201,7 +201,7 @@ "Export": "Exportieren", "Export log successfully.": "Log erfolgreich exportiert.", "Export machine log to SD card.": "Exportiere die Maschinenlogdatei auf SD-Karte.", - "Export the G-code file to a local device or load it to Workspace.": "Exportieren Sie die G-Code-Datei auf ein lokales Gerät oder laden Sie sie in den Workspace.", + "Export the G-code file to a local device or load it to Workspace.": "Exportieren Sie die G-Code-Datei auf ein lokales Gerät oder laden Sie sie in den Arbeitsbereich.", "Exporting": "Exportiere", "Expose Seam": "Naht offenlegen", "Extensive Stitching": "Extensives Stitching", @@ -829,7 +829,7 @@ "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "Die Tür der Einhausung ist geöffnet oder die elektrische Verbindung ist unterbrochen. Bitte schließen Sie die Tür oder schalten Sie die Maschine aus und stellen Sie elektrische Verbindung zur Umhausung wieder her. Falls es keine Einhausung gibt, schalten Sie die Türerkennung in den Maschineneinstellungen aus.", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Die Kamera wurde noch nicht kalibriert. Bitte führen Sie zuerst die Kamerakalibrierung auf dem Touchscreen durch.", "There are two types of origin mode.": "Es gibt zwei Typen des Ursprungs-Modus.", - "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.", + "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "Es gibt zwei Ursprungsversatz-Modi: Fadenkreuz- und Laserpunkt-Modus. Für die meisten Fälle empfehlen wir den Fadenkreuz-Modus, er ist sicherer und einfacher zu bedienen. Der Laserpunkt-Modus wird nur empfohlen, wenn eine vollflächige Bearbeitung erforderlich ist.", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Dieser Punkt (X0, Y0) ist der Ursprung des Design-Koordinatensystems und der Ursprung, der auf der Maschine positioniert oder gesetzt werden soll, muss mit diesem Punkt übereinstimmen.", "Tool Limiting": "Werkzeug-Limitierung", "Tool Type": "Werkzeug-Typ", @@ -2218,7 +2218,7 @@ "key-default_name-Cutting 8mm": "Schneiden 8 mm", "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", "key-default_name-Fast Print": "Schnelldruck", - "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", + "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", "key-default_name-HD Fill": "HD Fill", From ca92b542858b266d9f97cab2c22536e96951e85e Mon Sep 17 00:00:00 2001 From: parachvte Date: Sun, 3 Mar 2024 20:26:23 +0800 Subject: [PATCH 11/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 8a0c704900..d7ea45d7a0 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1788,7 +1788,7 @@ "key-Printing/ProfileManager-Reset": "Скинути", "key-Printing/ProfileManager-Reset Profile": "Скинути профіль", "key-Printing/ProfileManager-Save": "Зберегти", - "key-Printing/ProfileManager-Select": "Виділити", + "key-Printing/ProfileManager-Select": "Вибрати", "key-Printing/Repair": "Полагодити", "key-Printing/RoationAnalyze-Complete": "Завершити", "key-Printing/RoationAnalyze-Support Volume": "Обʼєм підтримок", From 9f832c393b7717d5a87997f52a8702418e649cc6 Mon Sep 17 00:00:00 2001 From: parachvte Date: Mon, 4 Mar 2024 21:02:29 +0800 Subject: [PATCH 12/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index d7ea45d7a0..62ba64235d 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -728,7 +728,7 @@ "Start on Luban": "Запустити з Luban", "Step down": "Крок вниз", "Stepdown": "Подача", - "Stepover": "Переступання", + "Stepover": "Крок вбік", "Steppers are disabled. You can push XY axes to move the tool head.": "Двигуни вимкнено. Ви можете рухати головку в горизонтальних напрямках рукою.", "Steps per Millimeter (E)": "Кроків на мм (E)", "Steps per Millimeter (X)": "Кроків на мм (X)", From c4c8e5c43d19b8af68fc4c61b4b753fea9c6cd22 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 7 Mar 2024 17:42:27 +0800 Subject: [PATCH 13/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 62ba64235d..0b5279b9ff 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -15,6 +15,7 @@ "Adaptive Layers Topography Size": "Розмір топографії адаптивних шарів", "Adaptive Layers Variation Step Size": "Розмір кроку варіації адаптивних шарів", "Adhesion Tendency": "Напрямок зчеплення", + "Air Assist Pump": "Допоміжна повітряна помпа", "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Очищувач Повітря Відʼєднано. Вимкніть пристрій, підʼєднайте очищувач повітря наново, та перезапустіть пристрій. Якщо проблема лишилась, зверніться до Підтримки по допомогу.", "All": "Всі", "All at Once": "Всі разом", @@ -29,7 +30,6 @@ "Anti-ooze Retraction Speed": "Швидкість втягування для запобігання витоку", "Are you sure you want to stop the print job?": "Ви впевнені, що хочете зупинити друк?", "Auto Temperature": "Автоматичне регулювання температури", - "Air Assist Pump": "Допоміжна повітряна помпа", "Avoid Printed Parts When Traveling": "Оминати надруковані частини під час пересування", "Avoid Supports When Traveling": "Оминати опори під час пересування", "Back": "Ззаду", @@ -1079,6 +1079,8 @@ "key-App/Settings/MachineSettings-Machine": "Пристрій", "key-App/Settings/MachineSettings-Modules": "Модулі", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Одинарний екструдер", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit", "key-App/Settings/MachineSettings-Standard CNC": "Стандартний", "key-App/Settings/Model Examination": "Перевірка моделі", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Під час імпорту сповіщати про моделі з вадами", @@ -1912,6 +1914,7 @@ "key-Widget/CommonDropdownButton-fullscreen": "Повноекранний", "key-Workspace/Connection-3dp": "3D друк", "key-Workspace/Connection-Add": "Додати", + "key-Workspace/Connection-Bracing Kit": "Bracing Kit", "key-Workspace/Connection-CNC": "Фрезерування", "key-Workspace/Connection-Choose a machine": "Виберіть прилад", "key-Workspace/Connection-Choose a port": "Виберіть порт", @@ -2002,7 +2005,7 @@ "key-Workspace/Enclosure-Door Detection": "Відкриття дверцят", "key-Workspace/Enclosure-Enclosure": "Захисний бокс", "key-Workspace/Enclosure-Exhaust Fan": "Витяжний вентилятор", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Якщо ви вимкнете сенсор відкриття дверцят, робота не буде зупинятись, коли одна з панелей захисного боксу буде відкритою.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", "key-Workspace/Enclosure-LED Strips": "LED підсвітка", "key-Workspace/Fine-tuneWorkOrigin-Close": "Закрити", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Визначає швидкість руху робочої головки пристрою, під час роботи.", From 667d28061ab5161489cd97562e10c48db4549dda Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 7 Mar 2024 17:42:29 +0800 Subject: [PATCH 14/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index a8b98ee606..939777a670 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -15,6 +15,7 @@ "Adaptive Layers Topography Size": "Adaptive Ebenen Topografiegröße", "Adaptive Layers Variation Step Size": "Adaptive Ebenenvariation Schrittgröße", "Adhesion Tendency": "Adhesion-Tendenz", + "Air Assist Pump": "Hilfsluftpumpe", "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Luftfilter getrennt. Bitte schalten Sie die Maschine aus, verbinden den Luftfilter neu und starten Sie neu. Wenn das Problem weiterhin besteht, wenden Sie sich an unseren Support für Unterstützung.", "All": "Alle", "All at Once": "Alle gleichzeitig", @@ -29,7 +30,6 @@ "Anti-ooze Retraction Speed": "Einzugsgeschwindigkeit für Sickerschutz", "Are you sure you want to stop the print job?": "Bist du sicher, dass du die Bearbeitung stoppen willst?", "Auto Temperature": "Automatische Temperatur", - "Air Assist Pump": "Hilfsluftpumpe", "Avoid Printed Parts When Traveling": "Bedruckte Teile umfahren", "Avoid Supports When Traveling": "Vermeiden Sie Stützen beim verfahren", "Back": "Hinten", @@ -1079,6 +1079,8 @@ "key-App/Settings/MachineSettings-Machine": "Gerät", "key-App/Settings/MachineSettings-Modules": "Module", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Einzelner Extruder", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit", "key-App/Settings/MachineSettings-Standard CNC": "Norm", "key-App/Settings/Model Examination": "Modellprüfung", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Popup-Erinnerung beim Importieren eines fehlerhaften Modells", @@ -1912,6 +1914,7 @@ "key-Widget/CommonDropdownButton-fullscreen": "Vollbildmodus", "key-Workspace/Connection-3dp": "3D-Druck", "key-Workspace/Connection-Add": "Hinzufügen", + "key-Workspace/Connection-Bracing Kit": "Bracing Kit", "key-Workspace/Connection-CNC": "CNC", "key-Workspace/Connection-Choose a machine": "Wählen Sie ein Gerät", "key-Workspace/Connection-Choose a port": "Wählen Sie einen Anschluss", @@ -2002,7 +2005,7 @@ "key-Workspace/Enclosure-Door Detection": "Tür-Erkennung", "key-Workspace/Enclosure-Enclosure": "Gehäuse", "key-Workspace/Enclosure-Exhaust Fan": "Abluftventilator", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennungsfunktion deaktivieren, wird Ihr Auftrag nicht unterbrochen, wenn eine oder beiden Türen geöffnet wird/werden.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", "key-Workspace/Enclosure-LED Strips": "LED-Streifen", "key-Workspace/Fine-tuneWorkOrigin-Close": "Schließen", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Bestimmt, wie schnell sich das Gerät bewegt, wenn es sich in Betrieb befindet.", From 8f426f9aa438846add01cfce5ce44568c95724ef Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 7 Mar 2024 17:42:30 +0800 Subject: [PATCH 15/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index c1095c65f1..d8e35293bb 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -15,6 +15,7 @@ "Adaptive Layers Topography Size": "Dimensione topografica dei layers adattivi", "Adaptive Layers Variation Step Size": "Variazione strati dei layers adattivi", "Adhesion Tendency": "Tendenza di adesione", + "Air Assist Pump": "Air Assist Pump", "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.", "All": "Tutti", "All at Once": "Tutto insieme", @@ -29,7 +30,6 @@ "Anti-ooze Retraction Speed": "Velocità di retrazione anti-ooze", "Are you sure you want to stop the print job?": "Vuoi davvero interrompere questa stampa?", "Auto Temperature": "Temperatura automatica", - "Air Assist Pump": "Air Assist Pump", "Avoid Printed Parts When Traveling": "Evita le parti stampate durante lo spostamento", "Avoid Supports When Traveling": "Evita i supporti durante lo spostamento", "Back": "Dietro", @@ -1079,6 +1079,8 @@ "key-App/Settings/MachineSettings-Machine": "Macchina", "key-App/Settings/MachineSettings-Modules": "Modules", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Estrusore singolo", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit", "key-App/Settings/MachineSettings-Standard CNC": "Standard", "key-App/Settings/Model Examination": "Model Examination", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Pop up a reminder when importing deficient model(s)", @@ -1912,6 +1914,7 @@ "key-Widget/CommonDropdownButton-fullscreen": "Schermo intero", "key-Workspace/Connection-3dp": "Stampa 3D", "key-Workspace/Connection-Add": "Aggiungi", + "key-Workspace/Connection-Bracing Kit": "Bracing Kit", "key-Workspace/Connection-CNC": "CNC", "key-Workspace/Connection-Choose a machine": "Seleziona una macchina", "key-Workspace/Connection-Choose a port": "Seleziona una porta", @@ -2002,7 +2005,7 @@ "key-Workspace/Enclosure-Door Detection": "Rilevamento della porta", "key-Workspace/Enclosure-Enclosure": "Contenitore", "key-Workspace/Enclosure-Exhaust Fan": "Ventola di scarico", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", "key-Workspace/Enclosure-LED Strips": "Strisce LED", "key-Workspace/Fine-tuneWorkOrigin-Close": "Chiudi", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Determina la velocità con cui si muove la macchina quando è in funzione.", From bdc1f1d62c6d697ff16477a0aae061edf2c63e27 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 7 Mar 2024 17:42:32 +0800 Subject: [PATCH 16/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index c443c180b8..ae3af9bc32 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -15,6 +15,7 @@ "Adaptive Layers Topography Size": "自适应图层地形尺寸", "Adaptive Layers Variation Step Size": "自适应图层变化步长", "Adhesion Tendency": "附着倾向", + "Air Assist Pump": "空气辅助泵", "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.", "All": "所有", "All at Once": "同时打印", @@ -29,7 +30,6 @@ "Anti-ooze Retraction Speed": "防渗出回抽速度", "Are you sure you want to stop the print job?": "确定要终止打印任务吗？", "Auto Temperature": "自动温度", - "Air Assist Pump": "空气辅助泵", "Avoid Printed Parts When Traveling": "空驶时避开已打印部分", "Avoid Supports When Traveling": "空驶时避开支撑", "Back": "后面", @@ -1079,6 +1079,8 @@ "key-App/Settings/MachineSettings-Machine": "机器", "key-App/Settings/MachineSettings-Modules": "模组", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "单喷头", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "直线模组加固套件", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "快拆套件", "key-App/Settings/MachineSettings-Standard CNC": "标准", "key-App/Settings/Model Examination": "模型检测", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "导入错误模型时，弹出修复提示", @@ -1912,6 +1914,7 @@ "key-Widget/CommonDropdownButton-fullscreen": "全屏", "key-Workspace/Connection-3dp": "3D 打印", "key-Workspace/Connection-Add": "添加", + "key-Workspace/Connection-Bracing Kit": "直线模组加固套件", "key-Workspace/Connection-CNC": "CNC", "key-Workspace/Connection-Choose a machine": "选择一台机器", "key-Workspace/Connection-Choose a port": "选择一个端口", @@ -2002,7 +2005,7 @@ "key-Workspace/Enclosure-Door Detection": "开关门检测", "key-Workspace/Enclosure-Enclosure": "外罩", "key-Workspace/Enclosure-Exhaust Fan": "排气扇", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\nyour job will not pause when one of both of the enclosure panels is/are opened.": "关键-工作区/外罩-如果你关闭了开关门检测功能，你的任务将不会因某一外罩门板打开而暂停。", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "关键-工作区/外罩-如果你关闭了开关门检测功能，你的任务将不会因某一外罩门板打开而暂停。", "key-Workspace/Enclosure-LED Strips": "LED 灯条", "key-Workspace/Fine-tuneWorkOrigin-Close": "关闭", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "确定机器工作时的移动速度。", From bf3c3c6160a621d4a3a9bca04db68e72456a713e Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 8 Mar 2024 18:41:54 +0800 Subject: [PATCH 17/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 0b5279b9ff..03842b4dac 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1079,8 +1079,8 @@ "key-App/Settings/MachineSettings-Machine": "Пристрій", "key-App/Settings/MachineSettings-Modules": "Модулі", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Одинарний екструдер", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Набір кріплень", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Набір для швидкої заміни", "key-App/Settings/MachineSettings-Standard CNC": "Стандартний", "key-App/Settings/Model Examination": "Перевірка моделі", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Під час імпорту сповіщати про моделі з вадами", @@ -1914,7 +1914,7 @@ "key-Widget/CommonDropdownButton-fullscreen": "Повноекранний", "key-Workspace/Connection-3dp": "3D друк", "key-Workspace/Connection-Add": "Додати", - "key-Workspace/Connection-Bracing Kit": "Bracing Kit", + "key-Workspace/Connection-Bracing Kit": "Набір кріплень", "key-Workspace/Connection-CNC": "Фрезерування", "key-Workspace/Connection-Choose a machine": "Виберіть прилад", "key-Workspace/Connection-Choose a port": "Виберіть порт", @@ -2005,7 +2005,7 @@ "key-Workspace/Enclosure-Door Detection": "Відкриття дверцят", "key-Workspace/Enclosure-Enclosure": "Захисний бокс", "key-Workspace/Enclosure-Exhaust Fan": "Витяжний вентилятор", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Якщо ви вимкнете сенсор відкриття дверцят, робота не буде зупинятись, коли одна з панелей захисного боксу буде відкритою.", "key-Workspace/Enclosure-LED Strips": "LED підсвітка", "key-Workspace/Fine-tuneWorkOrigin-Close": "Закрити", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Визначає швидкість руху робочої головки пристрою, під час роботи.", From 9c72af81974c2e9f113ed8b39882defaa1fa92b0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 4 Apr 2024 10:45:53 +0800 Subject: [PATCH 18/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 50 ++++++++++++------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 939777a670..89f6364c8a 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -28,11 +28,11 @@ "Anti Overhang Mesh": "Anti-Überhang-Netz", "Anti-ooze Retracted Position": "Einzugsmaß für Sickerschutz", "Anti-ooze Retraction Speed": "Einzugsgeschwindigkeit für Sickerschutz", - "Are you sure you want to stop the print job?": "Bist du sicher, dass du die Bearbeitung stoppen willst?", + "Are you sure you want to stop the print job?": "Bist du sicher, dass du den Druckauftrag stoppen willst?", "Auto Temperature": "Automatische Temperatur", "Avoid Printed Parts When Traveling": "Bedruckte Teile umfahren", - "Avoid Supports When Traveling": "Vermeiden Sie Stützen beim verfahren", - "Back": "Hinten", + "Avoid Supports When Traveling": "Support umfahren", + "Back": "Zurück", "Back Left": "Hinten Links", "Back Right": "Hinten Rechts", "Ball": "Kugelkopf-Fräser", @@ -48,7 +48,7 @@ "Break Preparation Temperature": "Temperatur für Bruchvorbereitung", "Break Retracted Position": "Einzugsmaß für das Brechen", "Break Retraction Speed": "Einzugsgeschwindigkeit für das Brechen", - "Break Temperature": "Bruchtemperatu", + "Break Temperature": "Bruchtemperatur", "Break Up Support In Chunks": "Stützstruktur in Blöcke aufteilen", "Bridge Fan Speed": "Lüfterdrehzahl Brücke", "Bridge Has Multiple Layers": "Brücke hat mehrere Schichten", @@ -992,12 +992,12 @@ "key-App/Menu-Backup config": "Backup-Konfiguration", "key-App/Menu-Beginners Guide": "Anleitung für Einsteiger", "key-App/Menu-CNC": "CNC", - "key-App/Menu-Case Library": "Fall-Bibliothek", + "key-App/Menu-Case Library": "Beispiel-Bibliothek", "key-App/Menu-Clear All Recent Projects": "Alle aktuellen Projekte löschen", "key-App/Menu-Copy": "Kopieren", "key-App/Menu-Copy Original": "Text kopieren", "key-App/Menu-Cut": "Löschen", - "key-App/Menu-Cut Original": "Text Löschen", + "key-App/Menu-Cut Original": "Text ausschneiden", "key-App/Menu-Delete": "Löschen", "key-App/Menu-Download Logs": "Protokolle herunterladen", "key-App/Menu-Duplicate": "Duplizieren", @@ -1027,15 +1027,15 @@ "key-App/Menu-Rename": "Umbenennen", "key-App/Menu-Reset Configurations": "Konfiguration zurücksetzen", "key-App/Menu-Run Engine Test": "Pingtest ausführen", - "key-App/Menu-Run Wifi Test": "Pingtest ausführen", + "key-App/Menu-Run Wifi Test": "WLAN-Test ausführen", "key-App/Menu-Save As": "Speichern als", "key-App/Menu-Save Project": "Projekt speichern", "key-App/Menu-Select All": "Alles auswählen", "key-App/Menu-Settings": "Einstellungen", "key-App/Menu-Software Manual": "Software-Handbuch", "key-App/Menu-Software Update": "Software-Aktualisierung", - "key-App/Menu-Store": "Speichern", - "key-App/Menu-Support": "Träger", + "key-App/Menu-Store": "Shop", + "key-App/Menu-Support": "Support-Center", "key-App/Menu-Text-editor": "Text-Editor", "key-App/Menu-Toggle Developer Tools": "Umschalten der Entwickler-Tools", "key-App/Menu-Toggle Fullscreen": "Auf Vollbild umschalten", @@ -1059,7 +1059,7 @@ "key-App/Settings/General-File Preview": "Dateivorschau", "key-App/Settings/General-Language": "Sprache", "key-App/Settings/General-Learn more": "Mehr erfahren", - "key-App/Settings/General-Preview file when import G code to workspace": "Vorschau der Datei beim Importieren des G-Codes in den Workspace", + "key-App/Settings/General-Preview file when import G code to workspace": "Vorschau der Datei beim Importieren des G-Codes in den Arbeitsbereich", "key-App/Settings/General-Software Update": "Software-Aktualisierung", "key-App/Settings/General-Workspace Hide the console when working": "Die Konsole während der Bearbeitung ausblenden", "key-App/Settings/General-Workspace Setting": "Arbeitsumgebungs-Einstellungen", @@ -1079,8 +1079,8 @@ "key-App/Settings/MachineSettings-Machine": "Gerät", "key-App/Settings/MachineSettings-Modules": "Module", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Einzelner Extruder", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Verstärkungs-Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Schnellwechsel-Kit", "key-App/Settings/MachineSettings-Standard CNC": "Norm", "key-App/Settings/Model Examination": "Modellprüfung", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Popup-Erinnerung beim Importieren eines fehlerhaften Modells", @@ -1120,7 +1120,7 @@ "key-Cnc/Edit/ContextMenu-Bring to Front": "Nach vorne bringen", "key-Cnc/Edit/ContextMenu-Close": "Schließen", "key-Cnc/Edit/ContextMenu-Copy": "Kopieren", - "key-Cnc/Edit/ContextMenu-Cut": "Löschen", + "key-Cnc/Edit/ContextMenu-Cut": "Ausschneiden", "key-Cnc/Edit/ContextMenu-Duplicate": "Duplizieren", "key-Cnc/Edit/ContextMenu-Flip Horizontal": "Horizontal drehen", "key-Cnc/Edit/ContextMenu-Flip Vertical": "Vertikal drehen", @@ -1344,11 +1344,11 @@ "key-HomePage/Begin-CNC": "CNC", "key-HomePage/Begin-CNC G-code Generator": "CNC-G-Code-Generator", "key-HomePage/Begin-Cancel": "Abbrechen", - "key-HomePage/Begin-Case Library": "Fall-Bibliothek", + "key-HomePage/Begin-Case Library": "Beispiel-Bibliothek", "key-HomePage/Begin-Complete": "Vollständig", "key-HomePage/Begin-Configuration Wizard": "Konfigurations-Assistent", "key-HomePage/Begin-Forum": "Forum", - "key-HomePage/Begin-Get Started": "Anfangen", + "key-HomePage/Begin-Get Started": "Start", "key-HomePage/Begin-Help": "Hilfe", "key-HomePage/Begin-Laser": "Laser", "key-HomePage/Begin-Laser G-code Generator": "Laser-G-Codegenerator", @@ -1359,12 +1359,12 @@ "key-HomePage/Begin-Select Machine": "Gerät auswählen", "key-HomePage/Begin-Snapmaker.com": "Snapmaker.com", "key-HomePage/Begin-Software Manual": "Software-Handbuch", - "key-HomePage/Begin-Store": "Speichern", - "key-HomePage/Begin-Support": "Träger", + "key-HomePage/Begin-Store": "Shop", + "key-HomePage/Begin-Support": "Support-Center", "key-HomePage/Begin-Video Tutorial": "Video-Anleitung", "key-HomePage/Begin-Work Area": "Arbeitsbereich", "key-HomePage/Begin-Workspace": "Arbeitsbereich", - "key-HomePage/CaseLibrary": "Fall-Bibliothek", + "key-HomePage/CaseLibrary": "Beispiel-Bibliothek", "key-HomePage/CaseLibrary-Fabric": "Gewebe", "key-HomePage/CaseLibrary-Feather": "Feder", "key-HomePage/CaseLibrary-Gift Box": "Geschenkbox", @@ -1447,7 +1447,7 @@ "key-Laser/Edit/ContextMenu-Bring to Front": "Nach vorne bringen", "key-Laser/Edit/ContextMenu-Close": "Schließen", "key-Laser/Edit/ContextMenu-Copy": "Kopieren", - "key-Laser/Edit/ContextMenu-Cut": "Löschen", + "key-Laser/Edit/ContextMenu-Cut": "Ausschneiden", "key-Laser/Edit/ContextMenu-Duplicate": "Duplizieren", "key-Laser/Edit/ContextMenu-Flip Horizontal": "Horizontal drehen", "key-Laser/Edit/ContextMenu-Flip Vertical": "Vertikal drehen", @@ -1626,7 +1626,7 @@ "key-Printing/ContextMenu-BeforSimplify Model need to repair damage model": "Du musst das Schadenmodell reparieren, bevor du es vereinfachen kannst", "key-Printing/ContextMenu-Center Models": "Modelle zentrieren", "key-Printing/ContextMenu-Copy": "Kopieren", - "key-Printing/ContextMenu-Cut": "Löschen", + "key-Printing/ContextMenu-Cut": "Ausschneiden", "key-Printing/ContextMenu-Duplicate": "Duplizieren", "key-Printing/ContextMenu-FitViewIn": "Auto-Zoom", "key-Printing/ContextMenu-Hide": "Ausblenden", @@ -1735,7 +1735,7 @@ "key-Printing/Page-Import an object, or drag an object to Luban.": "Importieren Sie ein Objekt, oder ziehen Sie ein Objekt zu Luban.", "key-Printing/Page-In Preview, you can see printing paths using features, including Line Type and Layer View.": "In der Vorschau können Sie Druckpfade mit Funktionen wie Linientyp und Schichtenansicht anzeigen.", "key-Printing/Page-Only STL/OBJ files are supported.": "Es werden nur STL- oder OBJ-Dateien unterstützt.", - "key-Printing/Page-Place or transform the object using icons, including Move, Scale, Rotate, Mirror, and Manual Support.": "Platzieren oder transformieren Sie das Objekt mit anhand von Symbolen, einschließlich Verschieben, Skalieren, Drehen, Spiegeln und Manuelle Träger.", + "key-Printing/Page-Place or transform the object using icons, including Move, Scale, Rotate, Mirror, and Manual Support.": "Platzieren oder transformieren Sie das Objekt mithilfe von Symbolen, einschließlich Verschieben, Skalieren, Drehen, Spiegeln und manueller Support.", "key-Printing/Page-Placement": "Platzierung", "key-Printing/Page-Redo": "Erneut ausführen", "key-Printing/Page-Save": "Speichern", @@ -1887,7 +1887,7 @@ "key-SVGClipping/Background": "Hintergrund", "key-SVGClipping/Clip": "Clip", "key-SVGClipping/Offset": "Offset", - "key-SVGClipping/Ringing": "Ringing", + "key-SVGClipping/Ringing": "Überschwingen", "key-SVGClipping/Union": "Verbindung", "key-Settings/Create Material Tips": "Geben Sie die grundlegenden Materialeigenschaften ein und Luban generiert empfohlene Einstellungen für Sie.", "key-Settings/Nozazle-Add": "Düse Hinzufügen", @@ -1914,7 +1914,7 @@ "key-Widget/CommonDropdownButton-fullscreen": "Vollbildmodus", "key-Workspace/Connection-3dp": "3D-Druck", "key-Workspace/Connection-Add": "Hinzufügen", - "key-Workspace/Connection-Bracing Kit": "Bracing Kit", + "key-Workspace/Connection-Bracing Kit": "Verstärkungs-Kit", "key-Workspace/Connection-CNC": "CNC", "key-Workspace/Connection-Choose a machine": "Wählen Sie ein Gerät", "key-Workspace/Connection-Choose a port": "Wählen Sie einen Anschluss", @@ -2005,7 +2005,7 @@ "key-Workspace/Enclosure-Door Detection": "Tür-Erkennung", "key-Workspace/Enclosure-Enclosure": "Gehäuse", "key-Workspace/Enclosure-Exhaust Fan": "Abluftventilator", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennung deaktivieren, wird Ihr Auftrag nicht pausieren, wenn eine der beiden Gehäusetüren geöffnet ist.", "key-Workspace/Enclosure-LED Strips": "LED-Streifen", "key-Workspace/Fine-tuneWorkOrigin-Close": "Schließen", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Bestimmt, wie schnell sich das Gerät bewegt, wenn es sich in Betrieb befindet.", @@ -2118,7 +2118,7 @@ "key-Workspace/Page-Unable to resume the job.": "Sie können die Auftrag nicht fortsetzen.", "key-Workspace/Page-Unable to start the job.": "Der Auftrag kann nicht gestartet werden.", "key-Workspace/Page-Warning": "Warnung", - "key-Workspace/Page-You have pressed the Emergency Stop Button. Solve the emergency and reconnect Luban.": "Sie haben die Not-Aus-Taste gedrückt. Beheben Sie den Notfall und verbinden Sie Luban wieder.", + "key-Workspace/Page-You have pressed the Emergency Stop Button. Solve the emergency and reconnect Luban.": "Sie haben die Not-Aus-Taste gedrückt. Beheben Sie die Störung und verbinden Sie Luban wieder.", "key-Workspace/Purifier-Air Purifier": "Luftreiniger", "key-Workspace/Purifier-Fan Speed": "Gebläsedrehzahl", "key-Workspace/Purifier-Filter Life": "Lebensdauer Vom Filter", From e4644a6d29c9ec8adb4ca7fe2fded82136406a65 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 4 Apr 2024 10:45:54 +0800 Subject: [PATCH 19/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index ae3af9bc32..f71bcf855b 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -6,7 +6,7 @@ "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "设置为 0-4095 调整传感器灵敏度，越低的值表示越低的灵敏度。设置为 4096 会关闭检测。", "ABS": "ABS", "ASA": "ASA", - "Abnormal Laser Emitter. Please contact our Support for help.": "Abnormal Laser Emitter. Please contact our Support for help.", + "Abnormal Laser Emitter. Please contact our Support for help.": "异常激光Emitter。请联系我们的客服寻求帮助。", "Abnormal Laser Heat Dissipation. Please contact our Support for help.": "Abnormal Laser Heat Dissipation. Please contact our Support for help.", "Abnormal Laser Temperature Sensor. Please contact our Support for help.": "Abnormal Laser Temperature Sensor. Please contact our Support for help.", "Abnormal Toolhead Orientation Detection. Please contact our Support for help.": "Abnormal Toolhead Orientation Detection. Please contact our Support for help.", From 1d04f498339ded586a9ee052665d1b9598f31e07 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 2 May 2024 04:25:57 +0800 Subject: [PATCH 20/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 89f6364c8a..d787024971 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -1173,7 +1173,7 @@ "key-Cnc/Page-Warning": "Warnung", "key-Cnc/Page-X is the width of the material, and Y is the height of the material.": "X stellt die Breite des Materials, und Y stellt die Höhe des Materials dar.", "key-Cnc/Stl3dview-STL 3D View": "STL 3D-Ansicht", - "key-Cnc/StlSection/orientation_Back-Back": "Zurück", + "key-Cnc/StlSection/orientation_Back-Back": "Rückseite", "key-Cnc/StlSection/orientation_Bottom-Bottom": "Unten", "key-Cnc/StlSection/orientation_Front-Front": "Vorderseite", "key-Cnc/StlSection/orientation_Left-Left": "Links", From 74755d4b972781a70cc4905c906f7d0cb9764869 Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 3 May 2024 04:30:30 +0800 Subject: [PATCH 21/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index d787024971..8a8670f803 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -665,7 +665,7 @@ "Set the amount at which the Laser Module is lowered with each pass.": "Stellen Sie ein, um wie viel das Lasermodul bei jedem Durchgang abgesenkt wird.", "Set the amount of the material remaining on the object that needs to be carved in future operations.": "Legen Sie die Menge des auf dem Objekt verbleibenden Materials fest, das in zukünftigen Vorgängen geschnitzt werden muss.", "Set the degree to which an area is filled with laser lines or dots. The minimal interval is 0.05 mm.": "Stellen Sie den Grad ein, zu dem ein Bereich mit Laserlinien oder -Punkten gefüllt werden soll. Der Mindesabstand beträgt 0,05 mm.", - "Set the depth of the object to be carved. The depth should be smaller than the flute length.": "Stellen Sie die Tiefe des zu schnitzenden Objekts ein. Die Tiefe sollte kleiner sein als die Länge der Rille.", + "Set the depth of the object to be carved. The depth should be smaller than the flute length.": "Stellen Sie die Tiefe des zu schnitzenden Objekts ein. Die Tiefe sollte kleiner sein als die Länge der Spannut.", "Set the diameter of the carving tool.": "Stellen Sie den Durchmesser des Gravierwerkzeugs ein.", "Set the direction of the engraved path. Engraves the path in a horizontal, vertical, or diagonal direction.": "Legen Sie die Richtung des Gravurpfads ein. Graviert den Pfad in horizontaler, vertikaler oder diagonaler Richtung.", "Set the distance along the Z axis per step that the tool is plunged into the material.": "Stellen Sie den Entfernung entlang der Z-Achse ein, den das Werkzeug pro Schritt in das Material einfährt.", @@ -1206,7 +1206,7 @@ "key-Cnc/ToolpathParameters-Outline": "Umriss", "key-Cnc/ToolpathParameters-Outline_Carves along the outline of the object.": "Graviert entlang des Objekt-Umrisses.", "key-Cnc/ToolpathParameters-Rotation": "Drehung", - "key-Cnc/ToolpathParameters-Set the depth of the object to be carved. The depth should be smaller than the flute length.": "Stellen Sie die Tiefe des zu schnitzenden Objekts ein. Die Tiefe sollte kleiner sein als die Länge der Rille.", + "key-Cnc/ToolpathParameters-Set the depth of the object to be carved. The depth should be smaller than the flute length.": "Stellen Sie die Tiefe des zu schnitzenden Objekts ein. Die Tiefe sollte kleiner sein als die Länge der Spannut.", "key-Cnc/ToolpathParameters-Set the distance between the tool and the material when the tool is not carving.": "Stellen Sie den Entfernung zwischen dem Werkzeug und dem Material ein, wenn das Werkzeug nicht fräst.", "key-Cnc/ToolpathParameters-Set the processing method of the 2D object or 3D model.": "Stellen Sie die Bearbeitungsmethode für das 2D-Objekt oder 3D-Modell ein.", "key-Cnc/ToolpathParameters-Set the processing method of the 3D model.": "Stellen Sie die Bearbeitungsmethode für das 3D-Modell ein.", From f5831a6a12433ab2ecd01048916e971703fb9523 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 11 May 2024 17:05:21 +0800 Subject: [PATCH 22/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 8a8670f803..0421fac0a2 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -1065,9 +1065,11 @@ "key-App/Settings/General-Workspace Setting": "Arbeitsumgebungs-Einstellungen", "key-App/Settings/MachineSettings-10W Laser": "10W-Laser", "key-App/Settings/MachineSettings-1600mW Laser": "1600mW-Laser", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Dual Extrusion Module", "key-App/Settings/MachineSettings-200mW Laser": "200mW-Laser", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D-Druckmodul", "key-App/Settings/MachineSettings-3D Printing": "3D-Druck", + "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Dual Extrusion Module", "key-App/Settings/MachineSettings-CNC": "CNC", "key-App/Settings/MachineSettings-CNC Toolhead": "CNC-Modul", "key-App/Settings/MachineSettings-Dimensions": "Abmessungen", From d87b0f6810efbd710cd0c85969380cbfe3932448 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 11 May 2024 17:05:22 +0800 Subject: [PATCH 23/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index d8e35293bb..73b5a369c3 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -1065,9 +1065,11 @@ "key-App/Settings/General-Workspace Setting": "Workspace Setting", "key-App/Settings/MachineSettings-10W Laser": "Laser da 10 W", "key-App/Settings/MachineSettings-1600mW Laser": "Laser da 1600mW", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Dual Extrusion Module", "key-App/Settings/MachineSettings-200mW Laser": "Laser da 200mW", "key-App/Settings/MachineSettings-3D Print Toolhead": "Modulo di stampa 3D", "key-App/Settings/MachineSettings-3D Printing": "3D Printing", + "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Dual Extrusion Module", "key-App/Settings/MachineSettings-CNC": "CNC", "key-App/Settings/MachineSettings-CNC Toolhead": "Modulo CNC", "key-App/Settings/MachineSettings-Dimensions": "Dimensioni", From 3ebdf7dc54c856431bed033caae74856c0b6a1f0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 11 May 2024 17:05:24 +0800 Subject: [PATCH 24/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 03842b4dac..dc0bc6d126 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1065,9 +1065,11 @@ "key-App/Settings/General-Workspace Setting": "Налаштування Верстата", "key-App/Settings/MachineSettings-10W Laser": "Лазер 10W", "key-App/Settings/MachineSettings-1600mW Laser": "Лазер 1600mW", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Dual Extrusion Module", "key-App/Settings/MachineSettings-200mW Laser": "Лазер 200mW", "key-App/Settings/MachineSettings-3D Print Toolhead": "Модуль 3D друку", "key-App/Settings/MachineSettings-3D Printing": "3D друк", + "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Dual Extrusion Module", "key-App/Settings/MachineSettings-CNC": "Фрезерування", "key-App/Settings/MachineSettings-CNC Toolhead": "Фрезерувальний модуль", "key-App/Settings/MachineSettings-Dimensions": "Розміри", From c6e19ba3e06085be9934c82d2ca0dbc3a2c05859 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 11 May 2024 17:05:25 +0800 Subject: [PATCH 25/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index f71bcf855b..2f745e3d8f 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -1065,9 +1065,11 @@ "key-App/Settings/General-Workspace Setting": "工作区设置", "key-App/Settings/MachineSettings-10W Laser": "10W 激光", "key-App/Settings/MachineSettings-1600mW Laser": "1600mW 激光", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 双喷头模组", "key-App/Settings/MachineSettings-200mW Laser": "200mW 激光", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D 打印模组", "key-App/Settings/MachineSettings-3D Printing": "3D 打印", + "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan 双喷头模组", "key-App/Settings/MachineSettings-CNC": "CNC 加工", "key-App/Settings/MachineSettings-CNC Toolhead": "CNC 模组", "key-App/Settings/MachineSettings-Dimensions": "尺寸", From 51bc5c84338645718779b33aed837b9bf059f32f Mon Sep 17 00:00:00 2001 From: parachvte Date: Sun, 12 May 2024 17:00:57 +0800 Subject: [PATCH 26/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index dc0bc6d126..e00c1e8d05 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1065,11 +1065,11 @@ "key-App/Settings/General-Workspace Setting": "Налаштування Верстата", "key-App/Settings/MachineSettings-10W Laser": "Лазер 10W", "key-App/Settings/MachineSettings-1600mW Laser": "Лазер 1600mW", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Dual Extrusion Module", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Подвійний екструдер", "key-App/Settings/MachineSettings-200mW Laser": "Лазер 200mW", "key-App/Settings/MachineSettings-3D Print Toolhead": "Модуль 3D друку", "key-App/Settings/MachineSettings-3D Printing": "3D друк", - "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Dual Extrusion Module", + "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Подвійний екструдер", "key-App/Settings/MachineSettings-CNC": "Фрезерування", "key-App/Settings/MachineSettings-CNC Toolhead": "Фрезерувальний модуль", "key-App/Settings/MachineSettings-Dimensions": "Розміри", From 55e5b056e59c67ac82a68bf9b0ab8fe4dfb9a496 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 4 Jun 2024 01:51:35 +0800 Subject: [PATCH 27/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 0421fac0a2..d3979d15e5 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -236,7 +236,7 @@ "Fan Speed": "Lüftergeschwindigkeit", "Fan Speed Override": "Übersteuerung der Lüftergeschwindigkeit", "Feeder Wheel Diameter": "Feeder-Raddurchmesser", - "File sent successfully. Press and hold the work switch on the integrated controller (for about 3 seconds) until the machine starts the task.": "Die Datei wurde erfolgreich gesendet. Drücken und halten Sie den Button auf dem integrierten Controller (ca. 3 Sekunden) bis die Maschine die Aufgabe startet.", + "File sent successfully. Press and hold the work switch on the integrated controller (for about 3 seconds) until the machine starts the task.": "Die Datei wurde erfolgreich gesendet. Drücken und halten Sie den Button auf dem integrierten Controller (ca. 3 Sekunden), bis die Maschine die Aufgabe startet.", "Fill": "Füllen", "Fill Interval": "Füll Interval", "Final Printing Temperature": "Endgültige Drucktemperatur", @@ -556,7 +556,7 @@ "Parameters": "Parameter", "Password": "Passwort", "Past Boundary": "Trennen von Grenze", - "Please go to the machine, click work switch to run boundary. If the enclosure is installed, the enclosure door needs to be closed.": "Please go to the machine, click work switch to run boundary. If the enclosure is installed, the enclosure door needs to be closed.", + "Please go to the machine, click work switch to run boundary. If the enclosure is installed, the enclosure door needs to be closed.": "Bitte gehen Sie zur Maschine, klicken Sie auf den Button, um die Grenzen festzulegen. Wenn das Gehäuse installiert ist, muss die Tür geschlossen werden.", "Please select a vector and an image at the same time.": "Bitte wählen Sie gleichzeitig einen Vektor und ein Bild.", "Plunge Speed": "Eintauchtempo", "Point Angle": "Punktwinkel", @@ -1065,7 +1065,7 @@ "key-App/Settings/General-Workspace Setting": "Arbeitsumgebungs-Einstellungen", "key-App/Settings/MachineSettings-10W Laser": "10W-Laser", "key-App/Settings/MachineSettings-1600mW Laser": "1600mW-Laser", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Dual Extrusion Module", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2,0 Dual Extrusion Modul", "key-App/Settings/MachineSettings-200mW Laser": "200mW-Laser", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D-Druckmodul", "key-App/Settings/MachineSettings-3D Printing": "3D-Druck", From ee94e9fd0d3f47c246eaf58d8fbca23d62f8f968 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 5 Jun 2024 02:11:54 +0800 Subject: [PATCH 28/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index d3979d15e5..27d26a2231 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -561,7 +561,7 @@ "Plunge Speed": "Eintauchtempo", "Point Angle": "Punktwinkel", "Preset": "Voreinstellung", - "Press the work switch to pause/resume. Press and hold the button to stop.": "Press the work switch to pause/resume. Press and hold the button to stop.", + "Press the work switch to pause/resume. Press and hold the button to stop.": "Drücken Sie den Button für Pause/Fortsetzen. Drücken und halten Sie den Button, um zu stoppen.", "Prime Tower": "Prime Turm", "Prime Tower & Ooze Shield": "Prime Tower & Ooze-Schild", "Prime Tower Acceleration": "Beschleunigung Prime Tower", @@ -822,7 +822,7 @@ "Tab Height": "Reiterhöhe", "Tab Space": "Reiter-Leerzeichen", "Tab Width": "Reiter-Breite", - "Taking the object as the origin will take a certain location of the object as the origin. With the workpiece as the origin, a certain position of the workpiece will be used as the origin, and the relative position of the origin from the object will affect the final processing position.": "Taking the object as the origin will take a certain location of the object as the origin. With the workpiece as the origin, a certain position of the workpiece will be used as the origin, and the relative position of the origin from the object will affect the final processing position.", + "Taking the object as the origin will take a certain location of the object as the origin. With the workpiece as the origin, a certain position of the workpiece will be used as the origin, and the relative position of the origin from the object will affect the final processing position.": "Mit dem Objekt als Ursprung wird eine bestimmte Position des Objekts als Ursprung genommen. Mit dem Werkstück als Ursprung wird eine bestimmte Position des Werkstückes als Ursprung verwendet und die relative Position des Ursprungs vom Objekt wird die finale Verarbeitungsposition beeinflussen.", "Tangent to Boundary": "Mit Grenze verbunden", "Target Depth": "Soll-Tiefe", "Temperature & Cooling": "Temperatur & Kühlung", @@ -1069,7 +1069,7 @@ "key-App/Settings/MachineSettings-200mW Laser": "200mW-Laser", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D-Druckmodul", "key-App/Settings/MachineSettings-3D Printing": "3D-Druck", - "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Dual Extrusion Module", + "key-App/Settings/MachineSettings-Artisan Dual Extrusion Module": "Artisan Dual Extrusion Modul", "key-App/Settings/MachineSettings-CNC": "CNC", "key-App/Settings/MachineSettings-CNC Toolhead": "CNC-Modul", "key-App/Settings/MachineSettings-Dimensions": "Abmessungen", @@ -2298,9 +2298,9 @@ "key-setting/Left-Nozzle": "Linker Extruder", "key-setting/Right-Nozzle": "Rechter Extruder", "key-settings/Add Material": "Material Hinzufügen", - "key-settings/Nozzle Diameter": "Nozzle Durchmesser", - "key-settings/Nozzle Diameter Left": "Nozzle Links", - "key-settings/Nozzle Diameter Right": "Nozzle Rechts", + "key-settings/Nozzle Diameter": "Düse Durchmesser", + "key-settings/Nozzle Diameter Left": "Links", + "key-settings/Nozzle Diameter Right": "Rechts", "key-settings/Profile Manager": "Material Einstellung", "key-settings/Z-axis Extension": "Erweiterung", "key-settings/Z-axis Module": "Z-Achse Linearmodul", @@ -2309,7 +2309,7 @@ "key-settings_message-error": "Bei der Suche nach Aktualisierungen ist ein Fehler aufgetreten.", "key-settings_message-updateAva": "Aktualisierungen sind verfügbar.", "key-settings_message-update_not_ava": "Snapmaker Luban ist auf dem neuesten Stand.", - "key-toolpath_basename-Carve Toolpath": "Werkzeugpfad fräsen", + "key-toolpath_basename-Carve Toolpath": "Fräser Werkzeugpfad", "key-toolpath_basename-Image Toolpath": "Bild-Werkzeugpfad", "key-toolpath_basename-Vector Toolpath": "Vektor-Werkzeugpfad", "key-toolpath_basename-unknown": "unbekannt", @@ -2366,9 +2366,9 @@ "key-unused-Webcam": "Webcam", "key-unused-Webcam Settings": "Webcam-Einstellungen", "key-unused-{{pageLength}} per page": "{{pageLength}} pro Seite", - "key-workspace_open_port-Can not open this port": "Dieser Anschluss kann nicht geöffnet werden.", + "key-workspace_open_port-Can not open this port": "Dieser Port kann nicht geöffnet werden.", "key-workspace_open_port-The machine is not ready": "Das Gerät ist nicht bereit.", - "key_CNC_loading_warning": "This is an alpha version that gets you started with CNC carving. Ensure you have read<1><2>the Safety Information<3>before proceeding.", + "key_CNC_loading_warning": "This is an alpha version that gets you started with CNC carving.", "key_menu_About": "Über", "key_menu_Hide": "Ausblenden", "key_menu_Hide Others": "Andere ausblenden", From da0ad253aed3799697c224b36f1ca06c01001aa7 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 18 Jun 2024 19:14:25 +0800 Subject: [PATCH 29/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 54 ++++++++++++++++++++----- 1 file changed, 44 insertions(+), 10 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 27d26a2231..ed1edd3ae0 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -1,6 +1,7 @@ { "0 Gap": "0 Lücken", "20W Laser Module": "20W Laser Modul", + "2W Laser Module": "2W Laser Module", "3D Printer": "3D-Drucker", "40W Laser Module": "40W Laser Modul", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "Ein Wert von 0-4095 regelt die Sensorempfindlichkeit, wobei niedrigere Werte eine geringere Empfindlichkeit angeben.\nEin Wert von 4096 schaltet die Erkennung aus.", @@ -158,6 +159,7 @@ "Elliptic": "Elliptisch", "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Not-Halt. Bitte stellen Sie sicher, dass keine Gefahr besteht und starten Sie die Maschine nach dem Entriegeln des Not-Halt-Schalters neu.", "Emergency stop button triggered": "Not-Halt-Schalter betätigt", + "Enable 3D Print Head Setting": "Enable 3D Print Head Setting", "Enable Acceleration Control": "Beschleunigungssteuerung aktivieren", "Enable Bridge Settings": "Brückeneinstellungen aktivieren", "Enable Coasting": "Coasting aktivieren", @@ -373,6 +375,7 @@ "Keep the device attended while it is in use!": "Halten Sie das Gerät unter Beobachtung, während es in Gebrauch ist!", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "Das Objekt hat die Arbeitsgröße überschritten. Auf die maximale Arbeitsgröße skalieren?", "Key-Laser/ImportScale-Scale To Fit": "Skalieren zum Anpassen", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", "Key-Workspace/LaserStartJob-manual_mode_description": "Key-Workspace/LaserStartJob-Manual_Modus_Beschreibung", "Knot": "Knoten", "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Laser-Emitter-Überhitzung. Bitte schalten Sie die Maschine aus, warten Sie eine Weile und starten Sie den Vorgang neu. Wenn dies öfter auftritt, wenden Sie sich an unseren Support für Hilfe.", @@ -493,6 +496,7 @@ "Monotonic Top Surface Order": "Monotone obere/untere Ordnung", "Monotonic Top/Bottom Order": "Monotone obere/untere Ordnung", "More Settings": "Mehr Einstellungen", + "Motor Power Hold": "Motor Power Hold", "Movement Mode": "Bewegungsmodus", "Network": "Netzwerk", "New Features": "Neue Funktionen", @@ -650,6 +654,7 @@ "Right": "Rechts", "Right Extruder": "Rechter Extruder", "Run Boundary": "Ausführungsgrenze", + "Save": "Save", "Scale Fan Speed To 0-1": "Scale Fan Speed To 0-1", "Scaling Factor Shrinkage Compensation": "Scaling Factor Shrinkage Compensation", "Scan Offset": "Scan-Versatz", @@ -830,7 +835,10 @@ "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Die Kamera wurde noch nicht kalibriert. Bitte führen Sie zuerst die Kamerakalibrierung auf dem Touchscreen durch.", "There are two types of origin mode.": "Es gibt zwei Typen des Ursprungs-Modus.", "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "Es gibt zwei Ursprungsversatz-Modi: Fadenkreuz- und Laserpunkt-Modus. Für die meisten Fälle empfehlen wir den Fadenkreuz-Modus, er ist sicherer und einfacher zu bedienen. Der Laserpunkt-Modus wird nur empfohlen, wenn eine vollflächige Bearbeitung erforderlich ist.", + "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.", + "This mode requires homing to update the current machine coordinates. Would you like to continue?": "This mode requires homing to update the current machine coordinates. Would you like to continue?", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Dieser Punkt (X0, Y0) ist der Ursprung des Design-Koordinatensystems und der Ursprung, der auf der Maschine positioniert oder gesetzt werden soll, muss mit diesem Punkt übereinstimmen.", + "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.", "Tool Limiting": "Werkzeug-Limitierung", "Tool Type": "Werkzeug-Typ", "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Das Werkzeug-Modul wurde nicht erkannt. Bitte schalte die Maschine aus, überprüfe die Verbindung des Werkzeug-Moduls über das Verbindungskabel zum Controller und starte dann die Maschine erneut. Wenn das Problem weiterhin besteht, kontaktiere unseren Support für Hilfe.", @@ -888,6 +896,7 @@ "Use Tab": "Reiter verwenden", "Use Towers": "Verwendung von Pfeilern", "Use tabs to hold the pieces in place.": "Verwenden Sie Reiter, um die Teile zu fixieren.", + "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Use the control panel to position points A and B on the machine. Please do not move the print head manually.", "User Specified": "Benutzerdefiniert", "V-bit": "V-shaped Tip", "Variable Line": "Variable Linie", @@ -934,6 +943,8 @@ "Wall Transitioning Filter Margin": "Wandübergangsfilter Rand", "Wall Transitioning Threshold Angle": "Schwellenwinkel für Wandübergang", "Walls": "Wände", + "Warm reminder": "Warm reminder", + "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.", "Wi-Fi Name": "WLAN-Name", "Wipe Brush X Position": "Wipe Brush X Position", "Wipe Hop Speed": "Wipe Hop Speed", @@ -1065,7 +1076,7 @@ "key-App/Settings/General-Workspace Setting": "Arbeitsumgebungs-Einstellungen", "key-App/Settings/MachineSettings-10W Laser": "10W-Laser", "key-App/Settings/MachineSettings-1600mW Laser": "1600mW-Laser", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2,0 Dual Extrusion Modul", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Dual Extrusion Module", "key-App/Settings/MachineSettings-200mW Laser": "200mW-Laser", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D-Druckmodul", "key-App/Settings/MachineSettings-3D Printing": "3D-Druck", @@ -1073,7 +1084,6 @@ "key-App/Settings/MachineSettings-CNC": "CNC", "key-App/Settings/MachineSettings-CNC Toolhead": "CNC-Modul", "key-App/Settings/MachineSettings-Dimensions": "Abmessungen", - "key-App/Settings/MachineSettings-Dual Extruder Toolhead": "Doppel-Extruder", "key-App/Settings/MachineSettings-Head": "Werkzeugkopf", "key-App/Settings/MachineSettings-High CNC": "200W CNC", "key-App/Settings/MachineSettings-Laser": "Laser", @@ -1081,8 +1091,8 @@ "key-App/Settings/MachineSettings-Machine": "Gerät", "key-App/Settings/MachineSettings-Modules": "Module", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Einzelner Extruder", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Verstärkungs-Kit", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Schnellwechsel-Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Bracing Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Quick Swap Kit", "key-App/Settings/MachineSettings-Standard CNC": "Norm", "key-App/Settings/Model Examination": "Modellprüfung", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Popup-Erinnerung beim Importieren eines fehlerhaften Modells", @@ -1261,6 +1271,7 @@ "key-CncLaser/JobSetup-Use Locking block": "Verriegelungsblock", "key-CncLaser/JobSetup-Width (X)": "Breite (X)", "key-CncLaser/JobSetup-Work Origin": "Arbeitsursprung", + "key-CncLaser/MainToolBar-A-B Position": "A-B Position", "key-CncLaser/MainToolBar-Add Background": "Hintergrund hinzufügen", "key-CncLaser/MainToolBar-Bottom": "Unten", "key-CncLaser/MainToolBar-Camera Capture": "Kameraerfassung", @@ -1445,6 +1456,9 @@ "key-Laser/CameraCaptureOriginal-Side Length": "Seitenlänge", "key-Laser/CameraCaptureOriginal-Upload": "Hochladen", "key-Laser/CameraCaptureOriginal_laser_module_not_connect_notice": "Das Lasermodul ist nicht verbunden. Versuchen Sie, das USB-Kabel einzufügen, und stellen Sie dann eine Verbindung über die <1>Serieller Anschluss her.", + "key-Laser/Control/ABPositionButton-Clear AB": "AB löschen", + "key-Laser/Control/ABPositionButton-Set A position": "Legen Sie eine Position fest", + "key-Laser/Control/ABPositionButton-Set B position": "B-Position setzen", "key-Laser/Edit/ContextMenu-Arrange": "Anordnen", "key-Laser/Edit/ContextMenu-Bring to Front": "Nach vorne bringen", "key-Laser/Edit/ContextMenu-Close": "Schließen", @@ -1713,12 +1727,12 @@ "key-Printing/LeftBar/Support-Yes": "Ja", "key-Printing/MainToolBar-Materials": "Filament", "key-Printing/MainToolBar-Print Settings": "Druck Einstell.", - "key-Printing/MeshEdit-BrushType-SmartFill-Intro": "Depending on the angle of the triangles in the clicked area, select triangles with a range of angular tolerances around the connection.", + "key-Printing/MeshEdit-BrushType-SmartFill-Intro": "Wählen Sie je nach Winkel der Dreiecke im angeklickten Bereich Dreiecke mit einem Bereich von Winkeltoleranzen um die Verbindung aus.", "key-Printing/MeshEdit-BrushType-SmartFillBrush": "Intelligentes Füllen", "key-Printing/MeshEdit-BrushType-SphereBrush": "Pinsel", - "key-Printing/MeshEdit-BrushType-SphereBrush-Intro": "Triangles are selected based on the triangles and angular tolerances that the spherical brushes come in contact with. Smaller angle tolerances detect sharp borders, allowing the brush to paint only the area within the edge. The opposite is true for larger angles, where a 90° tolerance allows the brush to recede to select all triangles touched by all spherical brushes.", + "key-Printing/MeshEdit-BrushType-SphereBrush-Intro": "Dreiecke werden basierend auf den Dreiecken und Winkeltoleranzen ausgewählt, mit denen die kugelförmigen Bürsten in Kontakt kommen. Kleinere Winkeltoleranzen erkennen scharfe Ränder, sodass der Pinsel nur den Bereich innerhalb der Kante malen kann. Das Gegenteil gilt für größere Winkel, bei denen eine Toleranz von 90° es dem Pinsel ermöglicht, zurückzuweichen, um alle Dreiecke auszuwählen, die von allen kugelförmigen Pinseln berührt werden.", "key-Printing/MeshEdit-Color Select": "Farbauswahl", - "key-Printing/MeshEdit-Mesh Coloring": "Mesh Painting", + "key-Printing/MeshEdit-Mesh Coloring": "Mesh-Lackierung", "key-Printing/MeshEdit-Method": "Methode", "key-Printing/MeshEdit-Tolerance": "Toleranz", "key-Printing/Modal-Backup Tip": "Your historical data is backed up in the <1>here folder.", @@ -1987,6 +2001,7 @@ "key-Workspace/Control/JogDistance-Decrease custom distance by one unit": "Verringern der benutzerdefinierten Entfernung um eine Einheit", "key-Workspace/Control/JogDistance-Increase custom angle by one unit": "Erhöhung des benutzerdefinierten Winkels um eine Einheit", "key-Workspace/Control/JogDistance-Increase custom distance by one unit": "Erhöhung der benutzerdefinierten Entfernung um eine Einheit", + "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "XY-Achsenversatz", "key-Workspace/Control/JogDistance-XYZ Axis Travel Distance": "XYZ-Achsenversatz", "key-Workspace/Control/KeypadOverlay-0.1x Move": "Bewegen 0,1x", "key-Workspace/Control/KeypadOverlay-10x Move": "Bewegen 10x", @@ -2007,7 +2022,7 @@ "key-Workspace/Enclosure-Door Detection": "Tür-Erkennung", "key-Workspace/Enclosure-Enclosure": "Gehäuse", "key-Workspace/Enclosure-Exhaust Fan": "Abluftventilator", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennung deaktivieren, wird Ihr Auftrag nicht pausieren, wenn eine der beiden Gehäusetüren geöffnet ist.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennungsfunktion deaktivieren, wird Ihr Auftrag nicht angehalten, wenn eine der beiden Schaltschrankblenden geöffnet wird.", "key-Workspace/Enclosure-LED Strips": "LED-Streifen", "key-Workspace/Fine-tuneWorkOrigin-Close": "Schließen", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Bestimmt, wie schnell sich das Gerät bewegt, wenn es sich in Betrieb befindet.", @@ -2048,6 +2063,7 @@ "key-Workspace/Input password": "Passwort eingeben", "key-Workspace/Laser-high_power_tips": "Die Laserleistung wird beim Einschalten des Lasers auf das Minimum eingestellt.", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "Im Auto-Modus führt das Gerät einen Autofokus entsprechend der von Ihnen eingegebenen Materialdicke aus und startet den Auftrag.<1>Im manuellen Modus verwendet das Gerät den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<3>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", + "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Set Work Origin in <1>Control. Adjust the focus lever to touch the material. When the line above the knob aligns with Scale 0 or Focus, the laser beam (invisible for infrared laser) will focus right on the surface of the material. Click <3>Start, and the toolhead will move to the Work Origin to start laser engraving and cutting. If you do not reset Work Origin, the machine will use the same origin as the last job.", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "Materialdicke", "key-Workspace/LaserStartJob-3axis_start_job_prompt": "Im Auto-Modus führt das Gerät einen Autofokus entsprechend der von Ihnen eingegebenen Materialdicke aus und startet den Auftrag.<1>Im manuellen Modus verwendet das Gerät den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<3>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", "key-Workspace/LaserStartJob-4axis_start_job_prompt": "Das Gerät verwendet den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<1>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", @@ -2173,11 +2189,17 @@ "key-default_category-ABS": "ABS", "key-default_category-ASA": "ASA", "key-default_category-Acrylic": "Acryl", + "key-default_category-Aluminium-1060": "Aluminium-1060", + "key-default_category-Aluminium-5052": "Aluminium-5052", + "key-default_category-Aluminium-6061": "Aluminium-6061", "key-default_category-Basswood": "Lindenholz", + "key-default_category-Beech": "Beech", "key-default_category-Black Acrylic": "Schwarzes Acryl", "key-default_category-Black Anodized Aluminum": "Schwarz-eloxiertes Aluminium", + "key-default_category-Carbon-Fiber": "Carbon-Fiber", "key-default_category-Cardstock": "Kartenmaterial", "key-default_category-Coated Paper": "Beschichtetes Papier", + "key-default_category-Copper-H62": "Copper-H62", "key-default_category-Corrugated Paper": "Wellpappe", "key-default_category-Crazy Horse Leather": "Crazy Horse-Leder", "key-default_category-Custom": "Benutzerdefiniert", @@ -2196,19 +2218,23 @@ "key-default_category-PC": "PC", "key-default_category-PETG": "PETG", "key-default_category-PLA": "PLA", + "key-default_category-POM": "POM", "key-default_category-PVA": "PVA", "key-default_category-Pinewood": "Kiefernholz", "key-default_category-Support": "Support", "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Pflanzlich gegerbtes Leder", + "key-default_category-Walnut": "Walnut", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA-Black", "key-default_name-Ball End Mill": "Kugelfräser", + "key-default_name-Ball End Mill 2": "Ball End Mill 2mm", "key-default_name-Breakaway Support-White": "Breakaway Support-Weiß", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-Bit schnitzen", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", "key-default_name-Cutting 1.5mm": "Schneiden 1,5 mm", "key-default_name-Cutting 1.6mm": "Schneiden 1,6 mm", "key-default_name-Cutting 10mm": "Schneiden 10 mm", @@ -2221,13 +2247,16 @@ "key-default_name-Cutting 5mm": "Schneiden 5 mm", "key-default_name-Cutting 6mm": "6mm schneiden", "key-default_name-Cutting 8mm": "Schneiden 8 mm", + "key-default_name-Dot filled": "Standard dot filled", "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", + "key-default_name-Flat End Mill 4": "Flat End Mill 4", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", + "key-default_name-Line filled": "Standard line filled", "key-default_name-Line-filled Engraving": "Liniengefüllte Gravur", "key-default_name-Normal Print": "Normal", "key-default_name-Normal Print (Others)": "Normaler Druck (Andere)", @@ -2236,6 +2265,7 @@ "key-default_name-Normal Quality": "Normale Qualität", "key-default_name-Nylon-CoPA": "Nylon-CoPA", "key-default_name-Nylon-PA6-CF": "Nylon-PA6-CF", + "key-default_name-On the path": "Standard on the path", "key-default_name-Other": "Anderes-Weiß", "key-default_name-PC": "PC-Black", "key-default_name-PETG": "PETG", @@ -2262,6 +2292,9 @@ "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU Gelb", "key-default_name-Vector Engraving": "Vektor-Gravur", + "key-default_name-Vector dot filled": "Vector dot filled", + "key-default_name-Vector line filled": "Vector line filled", + "key-default_name-Vector on the path": "Vector on the path", "key-machineMaterialSettings/Profile-update": "Bearbeiten", "key-machine_selection-10W Laser": "10W-Laser", "key-machine_selection-3D Printing": "3D-Druck", @@ -2368,12 +2401,13 @@ "key-unused-{{pageLength}} per page": "{{pageLength}} pro Seite", "key-workspace_open_port-Can not open this port": "Dieser Port kann nicht geöffnet werden.", "key-workspace_open_port-The machine is not ready": "Das Gerät ist nicht bereit.", - "key_CNC_loading_warning": "This is an alpha version that gets you started with CNC carving.", + "key_CNC_loading_warning": "Dies ist eine Alpha-Version, mit der Sie mit dem CNC-Schnitzen beginnen können. Stellen Sie sicher, dass Sie die Sicherheitsinformationen<1><2> gelesen haben<3>bevor Sie fortfahren.", "key_menu_About": "Über", "key_menu_Hide": "Ausblenden", "key_menu_Hide Others": "Andere ausblenden", "key_menu_Quit": "Beenden", "key_menu_Services": "Dienstleistungen", "key_menu_Unhide": "Einblenden", - "key_ui/widgets/CNCPath/CNCPath_Transformation": "Umwandlung" + "key_ui/widgets/CNCPath/CNCPath_Transformation": "Umwandlung", + "manualModeDesc": "manualModeDesc" } From 85df86b1dba8dc26d7966cbf43540d177e7da1c0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 18 Jun 2024 19:14:26 +0800 Subject: [PATCH 30/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 46 +++++++++++++++++++++---- 1 file changed, 40 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index 73b5a369c3..af02d4ee98 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -1,6 +1,7 @@ { "0 Gap": "0 Gap", "20W Laser Module": "20W Laser Module", + "2W Laser Module": "2W Laser Module", "3D Printer": "Stampante 3D", "40W Laser Module": "40W Laser Module", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.", @@ -158,6 +159,7 @@ "Elliptic": "Ellittica", "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.", "Emergency stop button triggered": "Emergency stop button triggered", + "Enable 3D Print Head Setting": "Enable 3D Print Head Setting", "Enable Acceleration Control": "Abilita controllo accelerazioni", "Enable Bridge Settings": "Abilita impostazioni ponti", "Enable Coasting": "Abilita Coasting", @@ -373,6 +375,7 @@ "Keep the device attended while it is in use!": "Keep the device attended while it is in use!", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "L'oggetto ha superato le dimensioni possibili. Scalarlo alla dimensione massima possibile?", "Key-Laser/ImportScale-Scale To Fit": "Scala per adattarsi", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", "Key-Workspace/LaserStartJob-manual_mode_description": "Key-Workspace/LaserStartJob-manual_mode_description", "Knot": "Nodo", "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.", @@ -493,6 +496,7 @@ "Monotonic Top Surface Order": "Ordine della superfice superiore monotonico", "Monotonic Top/Bottom Order": "Ordine superiore/inferiore monotonico", "More Settings": "Altre impostazioni", + "Motor Power Hold": "Motor Power Hold", "Movement Mode": "Modalità di movimento", "Network": "Network", "New Features": "New Features", @@ -650,6 +654,7 @@ "Right": "Right", "Right Extruder": "Estrusore destro", "Run Boundary": "Esegui confine", + "Save": "Save", "Scale Fan Speed To 0-1": "Scale Fan Speed To 0-1", "Scaling Factor Shrinkage Compensation": "Scaling Factor Shrinkage Compensation", "Scan Offset": "Scan Offset", @@ -830,7 +835,10 @@ "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "La fotocamera non è stata ancora calibrata. Si prega di eseguire prima la calibrazione della fotocamera sul touchscreen.", "There are two types of origin mode.": "There are two types of origin mode.", "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.", + "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.", + "This mode requires homing to update the current machine coordinates. Would you like to continue?": "This mode requires homing to update the current machine coordinates. Would you like to continue?", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.", + "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.", "Tool Limiting": "Tool Limiting", "Tool Type": "Tool Type", "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.", @@ -888,6 +896,7 @@ "Use Tab": "Usa la scheda", "Use Towers": "Use Towers", "Use tabs to hold the pieces in place.": "Usa le schede per tenere i pezzi in posizione.", + "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Use the control panel to position points A and B on the machine. Please do not move the print head manually.", "User Specified": "User Specified", "V-bit": "V-shaped Tip", "Variable Line": "Variable Line", @@ -934,6 +943,8 @@ "Wall Transitioning Filter Margin": "Wall Transitioning Filter Margin", "Wall Transitioning Threshold Angle": "Angolo soglia parete di transizione", "Walls": "Pareti", + "Warm reminder": "Warm reminder", + "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.", "Wi-Fi Name": "Wi-Fi Name", "Wipe Brush X Position": "Wipe Brush X Position", "Wipe Hop Speed": "Wipe Hop Speed", @@ -1065,7 +1076,7 @@ "key-App/Settings/General-Workspace Setting": "Workspace Setting", "key-App/Settings/MachineSettings-10W Laser": "Laser da 10 W", "key-App/Settings/MachineSettings-1600mW Laser": "Laser da 1600mW", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Dual Extrusion Module", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Dual Extrusion Module", "key-App/Settings/MachineSettings-200mW Laser": "Laser da 200mW", "key-App/Settings/MachineSettings-3D Print Toolhead": "Modulo di stampa 3D", "key-App/Settings/MachineSettings-3D Printing": "3D Printing", @@ -1073,7 +1084,6 @@ "key-App/Settings/MachineSettings-CNC": "CNC", "key-App/Settings/MachineSettings-CNC Toolhead": "Modulo CNC", "key-App/Settings/MachineSettings-Dimensions": "Dimensioni", - "key-App/Settings/MachineSettings-Dual Extruder Toolhead": "Doppio estrusore", "key-App/Settings/MachineSettings-Head": "Testa portautensili", "key-App/Settings/MachineSettings-High CNC": "200W CNC", "key-App/Settings/MachineSettings-Laser": "Laser", @@ -1081,8 +1091,8 @@ "key-App/Settings/MachineSettings-Machine": "Macchina", "key-App/Settings/MachineSettings-Modules": "Modules", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Estrusore singolo", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Bracing Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Quick Swap Kit", "key-App/Settings/MachineSettings-Standard CNC": "Standard", "key-App/Settings/Model Examination": "Model Examination", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Pop up a reminder when importing deficient model(s)", @@ -1261,6 +1271,7 @@ "key-CncLaser/JobSetup-Use Locking block": "Use Locking block", "key-CncLaser/JobSetup-Width (X)": "Larghezza (X)", "key-CncLaser/JobSetup-Work Origin": "Origine del lavoro", + "key-CncLaser/MainToolBar-A-B Position": "A-B Position", "key-CncLaser/MainToolBar-Add Background": "Aggiungi sfondo", "key-CncLaser/MainToolBar-Bottom": "Basso", "key-CncLaser/MainToolBar-Camera Capture": "Acquisizione della fotocamera", @@ -1445,6 +1456,9 @@ "key-Laser/CameraCaptureOriginal-Side Length": "Lunghezza laterale", "key-Laser/CameraCaptureOriginal-Upload": "Carica", "key-Laser/CameraCaptureOriginal_laser_module_not_connect_notice": "Il modulo laser non è collegato. Prova a inserire il cavo USB, e poi collega tramite <1>Porta seriale.", + "key-Laser/Control/ABPositionButton-Clear AB": "Clear AB", + "key-Laser/Control/ABPositionButton-Set A position": "Set A position", + "key-Laser/Control/ABPositionButton-Set B position": "Set B position", "key-Laser/Edit/ContextMenu-Arrange": "Disponi", "key-Laser/Edit/ContextMenu-Bring to Front": "Portare in primo piano", "key-Laser/Edit/ContextMenu-Close": "Chiudi", @@ -1987,6 +2001,7 @@ "key-Workspace/Control/JogDistance-Decrease custom distance by one unit": "Riduci la distanza personalizzata di un'unità", "key-Workspace/Control/JogDistance-Increase custom angle by one unit": "Aumenta l'angolo personalizzato di un'unità", "key-Workspace/Control/JogDistance-Increase custom distance by one unit": "Aumenta la distanza personalizzata di un'unità", + "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "Spostamento asse XY", "key-Workspace/Control/JogDistance-XYZ Axis Travel Distance": "Spostamento asse XYZ", "key-Workspace/Control/KeypadOverlay-0.1x Move": "0,1x Sposta", "key-Workspace/Control/KeypadOverlay-10x Move": "10x Sposta", @@ -2007,7 +2022,7 @@ "key-Workspace/Enclosure-Door Detection": "Rilevamento della porta", "key-Workspace/Enclosure-Enclosure": "Contenitore", "key-Workspace/Enclosure-Exhaust Fan": "Ventola di scarico", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", "key-Workspace/Enclosure-LED Strips": "Strisce LED", "key-Workspace/Fine-tuneWorkOrigin-Close": "Chiudi", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Determina la velocità con cui si muove la macchina quando è in funzione.", @@ -2048,6 +2063,7 @@ "key-Workspace/Input password": "Input password", "key-Workspace/Laser-high_power_tips": "La potenza laser sarà impostata al minimo quando si accende il laser.", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "In modalità automatica, la macchina eseguirà la messa a fuoco automatica in base allo spessore materiale immesso e inizio il lavoro. <1>In modalità manuale, la macchina utilizzerà l'origine di lavoro corrente per avviare il lavoro. Assicurati di aver impostato l'origine del lavoro prima di iniziare. <3>Informazioni sulla sicurezza: Prima dell'uso, assicurati che la macchina sia stata dotata di un involucro e che sia l'operatore che gli astanti abbiano indossato occhiali di sicurezza laser.", + "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Set Work Origin in <1>Control. Adjust the focus lever to touch the material. When the line above the knob aligns with Scale 0 or Focus, the laser beam (invisible for infrared laser) will focus right on the surface of the material. Click <3>Start, and the toolhead will move to the Work Origin to start laser engraving and cutting. If you do not reset Work Origin, the machine will use the same origin as the last job.", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "Spessore materiale", "key-Workspace/LaserStartJob-3axis_start_job_prompt": "In modalità automatica, la macchina eseguirà la messa a fuoco automatica in base allo spessore materiale immesso e inizio il lavoro. <1>In modalità manuale, la macchina utilizzerà l'origine di lavoro corrente per avviare il lavoro. Assicurati di aver impostato l'origine del lavoro prima di iniziare. <3>Informazioni sulla sicurezza: Prima dell'uso, assicurati che la macchina sia stata dotata di un involucro e che sia l'operatore che gli astanti abbiano indossato occhiali di sicurezza laser.", "key-Workspace/LaserStartJob-4axis_start_job_prompt": "La macchina utilizzerà l'origine del lavoro corrente per inizio il lavoro. Assicurati di aver impostato l'origine del lavoro prima di iniziare. <1>Informazioni sulla sicurezza: Prima dell'uso, assicurati che la macchina sia stata dotata di un involucro e che sia l'operatore che gli astanti abbiano indossato occhiali di sicurezza laser.", @@ -2173,11 +2189,17 @@ "key-default_category-ABS": "ABS", "key-default_category-ASA": "ASA", "key-default_category-Acrylic": "Acrilico", + "key-default_category-Aluminium-1060": "Aluminium-1060", + "key-default_category-Aluminium-5052": "Aluminium-5052", + "key-default_category-Aluminium-6061": "Aluminium-6061", "key-default_category-Basswood": "Tiglio", + "key-default_category-Beech": "Beech", "key-default_category-Black Acrylic": "Acrilico nero", "key-default_category-Black Anodized Aluminum": "Alluminio anodizzato nero", + "key-default_category-Carbon-Fiber": "Carbon-Fiber", "key-default_category-Cardstock": "Cartoncino", "key-default_category-Coated Paper": "Carta rivestita", + "key-default_category-Copper-H62": "Copper-H62", "key-default_category-Corrugated Paper": "Carta ondulata", "key-default_category-Crazy Horse Leather": "Pelle di cavallo pazzo", "key-default_category-Custom": "Personalizza", @@ -2196,19 +2218,23 @@ "key-default_category-PC": "PC", "key-default_category-PETG": "PETG", "key-default_category-PLA": "PLA", + "key-default_category-POM": "POM", "key-default_category-PVA": "PVA", "key-default_category-Pinewood": "Pineta", "key-default_category-Support": "Supporti", "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Pelle conciata vegetale", + "key-default_category-Walnut": "Walnut", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ABS-Nero", "key-default_name-ABS_White": "ABS-Bianco", "key-default_name-ASA": "ABS-Nero", "key-default_name-Ball End Mill": "Fresa a testa sferica", + "key-default_name-Ball End Mill 2": "Ball End Mill 2mm", "key-default_name-Breakaway Support-White": "Breakaway Support-White", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "Intaglio a V", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", "key-default_name-Cutting 1.5mm": "Taglio 1,5 mm", "key-default_name-Cutting 1.6mm": "Taglio 1,6 mm", "key-default_name-Cutting 10mm": "Cutting 10mm", @@ -2221,13 +2247,16 @@ "key-default_name-Cutting 5mm": "Taglio 5 mm", "key-default_name-Cutting 6mm": "Cutting 6mm", "key-default_name-Cutting 8mm": "Taglio 8 mm", + "key-default_name-Dot filled": "Standard dot filled", "key-default_name-Dot-filled Engraving": "Incisione a punti", "key-default_name-Fast Print": "Stampa veloce", "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", "key-default_name-Flat End Mill 1.5": "Fresa a testa piatta 1,5", "key-default_name-Flat End Mill 3.175": "Fresa a testa piatta 3,175", + "key-default_name-Flat End Mill 4": "Flat End Mill 4", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Alta qualità", + "key-default_name-Line filled": "Standard line filled", "key-default_name-Line-filled Engraving": "Incisione a linee", "key-default_name-Normal Print": "Stampa Normale", "key-default_name-Normal Print (Others)": "Stampa Normale (Altri)", @@ -2236,6 +2265,7 @@ "key-default_name-Normal Quality": "Qualità normale", "key-default_name-Nylon-CoPA": "Nylon-CoPA", "key-default_name-Nylon-PA6-CF": "Nylon-PA6-CF", + "key-default_name-On the path": "Standard on the path", "key-default_name-Other": "Altro-Bianco", "key-default_name-PC": "PC-Nero", "key-default_name-PETG": "PETG", @@ -2262,6 +2292,9 @@ "key-default_name-TPU_Black": "TPU-Nero", "key-default_name-TPU_Yellow": "TPU-Giallo", "key-default_name-Vector Engraving": "Incisione vettoriale", + "key-default_name-Vector dot filled": "Vector dot filled", + "key-default_name-Vector line filled": "Vector line filled", + "key-default_name-Vector on the path": "Vector on the path", "key-machineMaterialSettings/Profile-update": "Modifica", "key-machine_selection-10W Laser": "Laser da 10 W", "key-machine_selection-3D Printing": "Stampa 3D", @@ -2375,5 +2408,6 @@ "key_menu_Quit": "Esci", "key_menu_Services": "Servizi", "key_menu_Unhide": "Scopri", - "key_ui/widgets/CNCPath/CNCPath_Transformation": "Trasformazione" + "key_ui/widgets/CNCPath/CNCPath_Transformation": "Trasformazione", + "manualModeDesc": "manualModeDesc" } From ac0f68d7e0be10e7576fa440882b0aa6654b89ad Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 18 Jun 2024 19:14:28 +0800 Subject: [PATCH 31/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 46 +++++++++++++++++++++---- 1 file changed, 40 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index e00c1e8d05..25fa91fe01 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1,6 +1,7 @@ { "0 Gap": "Без зазорів", "20W Laser Module": "Лазер 20W", + "2W Laser Module": "2W Laser Module", "3D Printer": "3D друк", "40W Laser Module": "Лазер 40W", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "Значення 0-4095 регулює чутливість датчика, при менших значеннях забезпечується менша чутливість. Значення 4096 вимикає датчик.", @@ -158,6 +159,7 @@ "Elliptic": "Еліптичний", "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Аварійна зупинка. Будь ласка, переконайтеся, що немає небезпеки, і перезапустіть пристрій після того, як відпустили кнопку аварійної зупинки.", "Emergency stop button triggered": "Натиснуто кнопку аварійної зупинки", + "Enable 3D Print Head Setting": "Enable 3D Print Head Setting", "Enable Acceleration Control": "Керування прискоренням", "Enable Bridge Settings": "Налаштування містків", "Enable Coasting": "Облицювання", @@ -373,6 +375,7 @@ "Keep the device attended while it is in use!": "Слідкуйте за пристроєм, поки він перебуває в роботі!", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "Обʼєкт перевищив робочий розмір. Масштабувати його до максимального робочого розміру?", "Key-Laser/ImportScale-Scale To Fit": "Масштабувати до робочого розміру", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", "Key-Workspace/LaserStartJob-manual_mode_description": "Встановіть початок відліку у <1>Керуванні. Точка відліку має бути у місці, де промінь лазера може сфокусуватись до маленької точки. Натисніть <3>Розпочати і лазерна головка переміститься до точки відліку, після чого розпочнеться процес гравіювання чи вирізання за допомогою лазерного променя. Якщо ви не перевстановили точку початку відліку, буде використовуватись точка задана під час останнього виконання роботи.", "Knot": "Вузол", "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Перегрів Лазерного Випромінювача. Вимкніть пристрій і зачекайте деякий час, потім перезапустіть пристрій. Якщо це відбувається доволі часто, зверніться до Підтримки по допомогу.", @@ -493,6 +496,7 @@ "Monotonic Top Surface Order": "Монотонний порядок прасування поверхні", "Monotonic Top/Bottom Order": "Монотонний порядок прасування верха/низу", "More Settings": "Більше налаштувань", + "Motor Power Hold": "Motor Power Hold", "Movement Mode": "Режим пересування", "Network": "Мережа", "New Features": "Нові можливості", @@ -650,6 +654,7 @@ "Right": "Праве", "Right Extruder": "Правий екструдер", "Run Boundary": "Перевірити межі", + "Save": "Save", "Scale Fan Speed To 0-1": "Коефіцієнт швидкости обдуву 0-1", "Scaling Factor Shrinkage Compensation": "Коефіцієнт компенсації усадки", "Scan Offset": "Зміщення сканування", @@ -830,7 +835,10 @@ "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Камера досі не відкалібрована. Виконайте калібрацію камери скориставшись панеллю керування на пристрої.", "There are two types of origin mode.": "Є два типи режимів налаштування точки відліку.", "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "Існує два типи режимів зміщення точки відліку: режим перехрестя та режим світлової точки. У більшості випадків ми рекомендуємо використовувати режим перехрестя, це безпечніше та простіше у використанні. Режим світлової точки рекомендується лише тоді, коли потрібна повна потужність лазера.", + "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.", + "This mode requires homing to update the current machine coordinates. Would you like to continue?": "This mode requires homing to update the current machine coordinates. Would you like to continue?", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Ця точка (X0, Y0) є точкою відліку вашого проєкту. Початок системи координат, який потрібно встановити на пристрої, має збігатися з цією точкою.", + "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.", "Tool Limiting": "Обмеження інструментів", "Tool Type": "Тип інструментів", "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Робочу Голівку Відʼєднано. Вимкніть пристрій, підʼєднайте робочу голівку наново, та перезапустіть пристрій. Якщо проблема лишилась, зверніться до Підтримки по допомогу.", @@ -888,6 +896,7 @@ "Use Tab": "Використовувати перемички", "Use Towers": "Використовувати вежі", "Use tabs to hold the pieces in place.": "Використовувати перемички для утримання частин на місці.", + "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Use the control panel to position points A and B on the machine. Please do not move the print head manually.", "User Specified": "Визначається користувачем", "V-bit": "V-подібний кінцевик", "Variable Line": "Змінна лінія", @@ -934,6 +943,8 @@ "Wall Transitioning Filter Margin": "Поле фільтру довжини переходу стінок", "Wall Transitioning Threshold Angle": "Пороговий кут переходу стінок", "Walls": "Стінки", + "Warm reminder": "Warm reminder", + "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.", "Wi-Fi Name": "Назва Wi-Fi", "Wipe Brush X Position": "Положення X щітки очищення", "Wipe Hop Speed": "Швидкість підйому очищення", @@ -1065,7 +1076,7 @@ "key-App/Settings/General-Workspace Setting": "Налаштування Верстата", "key-App/Settings/MachineSettings-10W Laser": "Лазер 10W", "key-App/Settings/MachineSettings-1600mW Laser": "Лазер 1600mW", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 Подвійний екструдер", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Dual Extrusion Module", "key-App/Settings/MachineSettings-200mW Laser": "Лазер 200mW", "key-App/Settings/MachineSettings-3D Print Toolhead": "Модуль 3D друку", "key-App/Settings/MachineSettings-3D Printing": "3D друк", @@ -1073,7 +1084,6 @@ "key-App/Settings/MachineSettings-CNC": "Фрезерування", "key-App/Settings/MachineSettings-CNC Toolhead": "Фрезерувальний модуль", "key-App/Settings/MachineSettings-Dimensions": "Розміри", - "key-App/Settings/MachineSettings-Dual Extruder Toolhead": "Подвійний екструдер", "key-App/Settings/MachineSettings-Head": "Модулі", "key-App/Settings/MachineSettings-High CNC": "200W", "key-App/Settings/MachineSettings-Laser": "Лазер", @@ -1081,8 +1091,8 @@ "key-App/Settings/MachineSettings-Machine": "Пристрій", "key-App/Settings/MachineSettings-Modules": "Модулі", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Одинарний екструдер", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Набір кріплень", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Набір для швидкої заміни", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Bracing Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Quick Swap Kit", "key-App/Settings/MachineSettings-Standard CNC": "Стандартний", "key-App/Settings/Model Examination": "Перевірка моделі", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Під час імпорту сповіщати про моделі з вадами", @@ -1261,6 +1271,7 @@ "key-CncLaser/JobSetup-Use Locking block": "Блокування положення", "key-CncLaser/JobSetup-Width (X)": "Ширина (X)", "key-CncLaser/JobSetup-Work Origin": "Точка відліку", + "key-CncLaser/MainToolBar-A-B Position": "A-B Position", "key-CncLaser/MainToolBar-Add Background": "Додати фон", "key-CncLaser/MainToolBar-Bottom": "Вниз", "key-CncLaser/MainToolBar-Camera Capture": "Захоплення камерою", @@ -1445,6 +1456,9 @@ "key-Laser/CameraCaptureOriginal-Side Length": "Довжина сторони", "key-Laser/CameraCaptureOriginal-Upload": "Надіслати", "key-Laser/CameraCaptureOriginal_laser_module_not_connect_notice": "Пристрій не підʼєднано до Luban. Спробуйте скористуватись кабелем USB та підʼєднатись за допомогою <1>Послідовного порту.", + "key-Laser/Control/ABPositionButton-Clear AB": "Clear AB", + "key-Laser/Control/ABPositionButton-Set A position": "Set A position", + "key-Laser/Control/ABPositionButton-Set B position": "Set B position", "key-Laser/Edit/ContextMenu-Arrange": "Впорядкувати", "key-Laser/Edit/ContextMenu-Bring to Front": "На передній план", "key-Laser/Edit/ContextMenu-Close": "Закрити", @@ -1987,6 +2001,7 @@ "key-Workspace/Control/JogDistance-Decrease custom distance by one unit": "Зменшити відстань на один крок", "key-Workspace/Control/JogDistance-Increase custom angle by one unit": "Зменшити кут на один крок", "key-Workspace/Control/JogDistance-Increase custom distance by one unit": "Збільшити відстань на один крок", + "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "Відстань пересування по осях XY", "key-Workspace/Control/JogDistance-XYZ Axis Travel Distance": "Відстань пересування по осях XYZ", "key-Workspace/Control/KeypadOverlay-0.1x Move": "Рух 0.1x", "key-Workspace/Control/KeypadOverlay-10x Move": "Рух 10x", @@ -2007,7 +2022,7 @@ "key-Workspace/Enclosure-Door Detection": "Відкриття дверцят", "key-Workspace/Enclosure-Enclosure": "Захисний бокс", "key-Workspace/Enclosure-Exhaust Fan": "Витяжний вентилятор", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Якщо ви вимкнете сенсор відкриття дверцят, робота не буде зупинятись, коли одна з панелей захисного боксу буде відкритою.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", "key-Workspace/Enclosure-LED Strips": "LED підсвітка", "key-Workspace/Fine-tuneWorkOrigin-Close": "Закрити", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Визначає швидкість руху робочої головки пристрою, під час роботи.", @@ -2048,6 +2063,7 @@ "key-Workspace/Input password": "Введіть пароль", "key-Workspace/Laser-high_power_tips": "Після ввімкнення потужність лазера буде встановлена на мінімум.", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "В автоматичному режимі буде здійсненно вимірювання товщини матеріалу для виконання автофокусування та старту роботи. <1>В Ручному режимі автофокусування буде зроблено відповідно до введеної товщини матеріалу та розпочато роботу. <3>Інформація про безпеку: перед використанням переконайтеся, що пристрій обладнано захисним боксом, а оператор та інші вдягли захисні окуляри, що захищають від випромінення лазера.", + "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Set Work Origin in <1>Control. Adjust the focus lever to touch the material. When the line above the knob aligns with Scale 0 or Focus, the laser beam (invisible for infrared laser) will focus right on the surface of the material. Click <3>Start, and the toolhead will move to the Work Origin to start laser engraving and cutting. If you do not reset Work Origin, the machine will use the same origin as the last job.", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "Товщина матеріалу", "key-Workspace/LaserStartJob-3axis_start_job_prompt": "В автоматичному режимі автофокусування буде зроблено відповідно до введеної товщини матеріалу та розпочато роботу. <1>В Ручному режимі буде використана поточна робоча точка відліку для початку роботи. Переконайтесь, що ви встановили точку початку відліку перед тим як розпочати. <3>Інформація про безпеку: перед використанням переконайтеся, що пристрій обладнано захисним боксом, а оператор та інші вдягли захисні окуляри, що захищають від випромінення лазера.", "key-Workspace/LaserStartJob-4axis_start_job_prompt": "Для початку роботи буде використана поточна точка відліку. Переконайтесь, що ви встановили точку початку відліку перед тим як розпочати. <3>Інформація про безпеку: перед використанням переконайтеся, що пристрій обладнано захисним боксом, а оператор та інші вдягли захисні окуляри, що захищають від випромінення лазера.", @@ -2173,11 +2189,17 @@ "key-default_category-ABS": "ABS", "key-default_category-ASA": "ASA", "key-default_category-Acrylic": "Акрил", + "key-default_category-Aluminium-1060": "Aluminium-1060", + "key-default_category-Aluminium-5052": "Aluminium-5052", + "key-default_category-Aluminium-6061": "Aluminium-6061", "key-default_category-Basswood": "Фанера з липи", + "key-default_category-Beech": "Beech", "key-default_category-Black Acrylic": "Чорний акрил", "key-default_category-Black Anodized Aluminum": "Чорний анодований алюміній", + "key-default_category-Carbon-Fiber": "Carbon-Fiber", "key-default_category-Cardstock": "Картон", "key-default_category-Coated Paper": "Ламінований папір", + "key-default_category-Copper-H62": "Copper-H62", "key-default_category-Corrugated Paper": "Гофрований папір", "key-default_category-Crazy Horse Leather": "Шкіра Crazy Horse", "key-default_category-Custom": "Інше", @@ -2196,19 +2218,23 @@ "key-default_category-PC": "PC", "key-default_category-PETG": "PETG", "key-default_category-PLA": "PLA", + "key-default_category-POM": "POM", "key-default_category-PVA": "PVA", "key-default_category-Pinewood": "Сосна", "key-default_category-Support": "Опори", "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Дублена шкіра", + "key-default_category-Walnut": "Walnut", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ASA", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA", "key-default_name-Ball End Mill": "Кулькова фреза", + "key-default_name-Ball End Mill 2": "Ball End Mill 2mm", "key-default_name-Breakaway Support-White": "Breakaway Support White", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-подібна фреза для різьблення", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", "key-default_name-Cutting 1.5mm": "Прорізання 1.5 мм", "key-default_name-Cutting 1.6mm": "Прорізання 1.6 мм", "key-default_name-Cutting 10mm": "Прорізання 10 мм", @@ -2221,13 +2247,16 @@ "key-default_name-Cutting 5mm": "Прорізання 5 мм", "key-default_name-Cutting 6mm": "Прорізання 6 мм", "key-default_name-Cutting 8mm": "Прорізання 8 мм", + "key-default_name-Dot filled": "Standard dot filled", "key-default_name-Dot-filled Engraving": "Точкове заповнення", "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", "key-default_name-Flat End Mill 1.5": "Пласка фреза 1.5", "key-default_name-Flat End Mill 3.175": "Пласка фреза 3.175", + "key-default_name-Flat End Mill 4": "Flat End Mill 4", "key-default_name-HD Fill": "HD заповнення", "key-default_name-High Quality": "Висока якість", + "key-default_name-Line filled": "Standard line filled", "key-default_name-Line-filled Engraving": "Лінійне заповнення", "key-default_name-Normal Print": "Звичайний друк", "key-default_name-Normal Print (Others)": "Звичайний друк (інше)", @@ -2236,6 +2265,7 @@ "key-default_name-Normal Quality": "Звичайна якість", "key-default_name-Nylon-CoPA": "Нейлон-CoPA", "key-default_name-Nylon-PA6-CF": "Нейлон-PA6-CF", + "key-default_name-On the path": "Standard on the path", "key-default_name-Other": "Інше", "key-default_name-PC": "PC", "key-default_name-PETG": "PETG", @@ -2262,6 +2292,9 @@ "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU-Yellow", "key-default_name-Vector Engraving": "Векторне гравіювання", + "key-default_name-Vector dot filled": "Vector dot filled", + "key-default_name-Vector line filled": "Vector line filled", + "key-default_name-Vector on the path": "Vector on the path", "key-machineMaterialSettings/Profile-update": "Редагувати", "key-machine_selection-10W Laser": "Лазер 10W", "key-machine_selection-3D Printing": "3D друк", @@ -2375,5 +2408,6 @@ "key_menu_Quit": "Вийти", "key_menu_Services": "Служби", "key_menu_Unhide": "Показати", - "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація" + "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація", + "manualModeDesc": "manualModeDesc" } From 1c666d8d4196c5c849eccb377d8f3da2db41eb91 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 18 Jun 2024 19:14:29 +0800 Subject: [PATCH 32/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 690 +++++++++++---------- 1 file changed, 362 insertions(+), 328 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index 2f745e3d8f..7f9d78a32d 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -1,22 +1,23 @@ { "0 Gap": "零间隙", "20W Laser Module": "20W 激光模组", + "2W Laser Module": "2W 激光模组", "3D Printer": "3D 打印机", "40W Laser Module": "40W 激光模组", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "设置为 0-4095 调整传感器灵敏度，越低的值表示越低的灵敏度。设置为 4096 会关闭检测。", "ABS": "ABS", "ASA": "ASA", - "Abnormal Laser Emitter. Please contact our Support for help.": "异常激光Emitter。请联系我们的客服寻求帮助。", - "Abnormal Laser Heat Dissipation. Please contact our Support for help.": "Abnormal Laser Heat Dissipation. Please contact our Support for help.", - "Abnormal Laser Temperature Sensor. Please contact our Support for help.": "Abnormal Laser Temperature Sensor. Please contact our Support for help.", - "Abnormal Toolhead Orientation Detection. Please contact our Support for help.": "Abnormal Toolhead Orientation Detection. Please contact our Support for help.", + "Abnormal Laser Emitter. Please contact our Support for help.": "激光发射器异常，请联系我们的支持团队寻求帮助。", + "Abnormal Laser Heat Dissipation. Please contact our Support for help.": "激光散热异常，请联系我们的支持团队寻求帮助。", + "Abnormal Laser Temperature Sensor. Please contact our Support for help.": "激光温度传感器异常，请联系我们的支持团队寻求帮助。", + "Abnormal Toolhead Orientation Detection. Please contact our Support for help.": "执行头姿态检测异常，请联系我们的支持团队寻求帮助。", "Absolute Extruder Prime Position": "绝对喷嘴擦除位置", "Adaptive Layers Maximum Variation": "自适应图层最大变化", "Adaptive Layers Topography Size": "自适应图层地形尺寸", "Adaptive Layers Variation Step Size": "自适应图层变化步长", "Adhesion Tendency": "附着倾向", "Air Assist Pump": "空气辅助泵", - "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.", + "Air Purifier Disconnected. Please power off the machine, replug the Air Purifier, and restart. If the problem persists, contact our Support for help.": "空气净化器已断开。请关闭机器电源，重新连接空气净化器，然后重启机器。如果问题仍然存在，请联系我们的支持团队寻求帮助。", "All": "所有", "All at Once": "同时打印", "Allowance": "余量", @@ -36,20 +37,20 @@ "Back Left": "左后", "Back Right": "右后", "Ball": "球头铣刀", - "Bits from Bytes": "Bits from Bytes", + "Bits from Bytes": "从 Bytes 到 Bits", "Both": "两者都", "Bottom Layers": "底部层数", "Bottom Pattern Initial Layer": "底部起始层图案", - "Bottom Skin Expand Distance": "Bottom Skin Expand Distance", - "Bottom Skin Removal Width": "Bottom Skin Removal Width", + "Bottom Skin Expand Distance": "底部皮肤扩展距离", + "Bottom Skin Removal Width": "底部皮肤移除宽度", "Bottom Thickness": "底部厚度", - "Break Preparation Retracted Position": "Break Preparation Retracted Position", - "Break Preparation Retraction Speed": "Break Preparation Retraction Speed", - "Break Preparation Temperature": "Break Preparation Temperature", - "Break Retracted Position": "Break Retracted Position", - "Break Retraction Speed": "Break Retraction Speed", + "Break Preparation Retracted Position": "断裂缓冲期回抽位置", + "Break Preparation Retraction Speed": "断裂缓冲期回抽速度", + "Break Preparation Temperature": "断裂缓冲期温度", + "Break Retracted Position": "断裂回抽位置", + "Break Retraction Speed": "断裂回抽速度", "Break Temperature": "断开温度", - "Break Up Support In Chunks": "Break Up Support In Chunks", + "Break Up Support In Chunks": "将支撑结构拆分成块状", "Bridge Fan Speed": "连桥风扇速度", "Bridge Has Multiple Layers": "连桥有多层", "Bridge Second Skin Density": "连桥第二层表面密度", @@ -149,46 +150,47 @@ "Dot width compensation": "点径补偿", "Downloading": "下载中", "Draft Shield Height": "防风罩高度", - "Draft Shield Limitation": "Draft Shield Limitation", - "Draft Shield X/Y Distance": "Draft Shield X/Y Distance", - "Drop Down Support Mesh": "Drop Down Support Mesh", + "Draft Shield Limitation": "防风罩限制", + "Draft Shield X/Y Distance": "防风罩 X/Y 距离", + "Drop Down Support Mesh": "下拉式支撑网格", "Dual Extrusion": "双头挤出", "Dual Extrusion Helper Type": "双喷辅助类型", "Dwell Time": "停留时间", - "Elliptic": "Elliptic", - "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.", + "Elliptic": "类圆形", + "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "紧急停止。确保危险已解除后，可释放急停开关并重启机器。", "Emergency stop button triggered": "急停开关已触发", + "Enable 3D Print Head Setting": "启用 3D 打印模组设置", "Enable Acceleration Control": "启用加速度控制", "Enable Bridge Settings": "启用连桥设置", - "Enable Coasting": "Enable Coasting", - "Enable Conical Support": "Enable Conical Support", - "Enable Draft Shield": "Enable Draft Shield", + "Enable Coasting": "启用滑行", + "Enable Conical Support": "启用锥形支撑", + "Enable Draft Shield": "启用防风罩", "Enable Ironing": "启用熨平", "Enable Jerk Control": "启用急动速度控制", - "Enable Nozzle Temperature Control": "Enable Nozzle Temperature Control", + "Enable Nozzle Temperature Control": "启用喷嘴温度控制", "Enable Ooze Shield": "启用渗出罩", "Enable Prime Blob": "启用擦除滴", "Enable Prime Tower": "启用装填塔", - "Enable Print Cooling": "Enable Print Cooling", + "Enable Print Cooling": "启用打印冷却", "Enable Retraction": "启用回抽", "Enable Support Brim": "启用支撑单层粘附", "Enable Support Floor": "启用支撑底板", "Enable Support Interface": "启用支撑接触面", "Enable Support Roof": "启用支撑顶板", - "Enable Travel Acceleration": "Enable Travel Acceleration", - "Enable Travel Jerk": "Enable Travel Jerk", + "Enable Travel Acceleration": "启用空驶加速度", + "Enable Travel Jerk": "启用空驶抖动速度", "Enabled Acceleration Control": "启用加速度控制", "Enabled Bridge Settings": "启用连桥设置", "Enabled Ironing": "启用熨平", - "Enabled Nozzle Temperature Control": "Enabled Nozzle Temperature Control", + "Enabled Nozzle Temperature Control": "启用喷嘴温度控制", "Enabled Ooze Shield": "启用渗出罩", "Enabled Prime Tower": "启用装填塔", "Enabled Support Interface": "启用支撑接触面", "Enclosure": "外罩", - "End G-code": "End G-code", - "End of Filament Purge Length": "End of Filament Purge Length", - "End of Filament Purge Speed": "End of Filament Purge Speed", - "Equalize Filament Flow": "Equalize Filament Flow", + "End G-code": "结束 G-code", + "End of Filament Purge Length": "耗材末端清除长度", + "End of Filament Purge Speed": "耗材末端清除速度", + "Equalize Filament Flow": "均衡耗材流量", "Error occurs on the Ray controller, error code: {{-errorCode}}": "Ray控制器出现错误，错误代码：{{-errorCode}}", "Error occurs on the Ray multi-function button, error code: {{-errorCode}}": "Ray多功能按钮出现错误，错误代码：{{-errorCode}}", "Error occurs on the air purifier, error code: {{-errorCode}}": "空气净化器出现错误，错误代码：{{-errorCode}}", @@ -196,46 +198,46 @@ "Error occurs on the laser module, error code: {{-errorCode}}": "激光模组出现错误，错误代码：{{-errorCode}}", "Error occurs owner: {{-owner}}, error code: {{-errorCode}}": "出现错误的所有者：{{-owner}}，错误代码：{{-errorCode}}", "Everywhere": "全部填充", - "Exclusive": "Exclusive", - "Experimental": "Experimental", + "Exclusive": "不包含", + "Experimental": "实验性", "Export": "导出", "Export log successfully.": "导出日志成功。", "Export machine log to SD card.": "将机器日志到导出到 SD 卡。", "Export the G-code file to a local device or load it to Workspace.": "将 G 代码导出到本地或加载至工作区。", "Exporting": "导出中", "Expose Seam": "暴露接缝", - "Extensive Stitching": "Extensive Stitching", - "Extra Infill Wall Count": "Extra Infill Wall Count", + "Extensive Stitching": "广泛缝合", + "Extra Infill Wall Count": "额外填充壁计数", "Extra Skin Wall Count": "额外皮肤壁计数", "Extruder": "挤出机", "Extruder End G-Code": "挤出机结束代码", "Extruder End Position Absolute": "挤出机结束绝对坐标", - "Extruder End Position X": "Extruder End Position X", - "Extruder End Position Y": "Extruder End Position Y", + "Extruder End Position X": "挤出机结束位置 X", + "Extruder End Position Y": "挤出机结束位置 Y", "Extruder Prime X Position": "喷嘴擦除 X 位置", "Extruder Prime Y Position": "喷嘴擦除 Y 位置", "Extruder Prime Z Position": "喷嘴擦除 Z 位置", - "Extruder Print Cooling Fan": "Extruder Print Cooling Fan", - "Extruder Start G-Code": "Extruder Start G-Code", - "Extruder Start Position Absolute": "Extruder Start Position Absolute", - "Extruder Start Position X": "Extruder Start Position X", - "Extruder Start Position Y": "Extruder Start Position Y", - "Extruders Share Heater": "Extruders Share Heater", - "Extruders Share Nozzle": "Extruders Share Nozzle", - "Extrusion": "Extrusion", + "Extruder Print Cooling Fan": "挤出机模型冷却风扇", + "Extruder Start G-Code": "挤出机启动 G-code", + "Extruder Start Position Absolute": "挤出机起始位置绝对值", + "Extruder Start Position X": "挤出机起始位置 X", + "Extruder Start Position Y": "挤出机起始位置 Y", + "Extruders Share Heater": "挤出机共用加热器", + "Extruders Share Nozzle": "挤出机共用喷嘴", + "Extrusion": "挤出", "Extrusion Cool Down Speed Modifier": "挤出冷却速度调节器", - "Failed to Home.Please check if any Linear Module is prevented from moving.If the problem persists, contact our Support for help.": "Failed to Home.Please check if any Linear Module is prevented from moving.If the problem persists, contact our Support for help.", + "Failed to Home.Please check if any Linear Module is prevented from moving.If the problem persists, contact our Support for help.": "返回原位失败。请检查是否有直线模组受阻而无法移动。如果问题仍然存在，请联系我们的支持团队获取帮助。", "Failed to download firmware.": "下载固件失败。", "Failed to export log.": "导出日志失败。", "Failed to import this object. \nPlease select a supported file format.": "无法导入该对象，请选择支持的文件格式。", "Failed to rename. \"{{name}}\" already exists.": "重命名失败，“{{name}}” 已存在。", - "Failed to repair this object. \n": "Failed to repair this object. \n", - "Failed to turn off crosshair.": "Failed to turn off crosshair.", - "Failed to turn on crosshair.": "Failed to turn on crosshair.", + "Failed to repair this object. \n": "修复此对象失败。 \n", + "Failed to turn off crosshair.": "关闭十字光失败。", + "Failed to turn on crosshair.": "打开十字光失败", "Failed to upgrade firmware.": "升级固件失败。", "Fan Speed": "风扇速度", "Fan Speed Override": "风扇速度覆盖", - "Feeder Wheel Diameter": "Feeder Wheel Diameter", + "Feeder Wheel Diameter": "进料装置驱动轮的直径", "File sent successfully. Press and hold the work switch on the integrated controller (for about 3 seconds) until the machine starts the task.": "文件发送成功。请在机器主控上长按按钮 (约3秒) 来开始工作。", "Fill": "填充", "Fill Interval": "填充间距", @@ -246,14 +248,14 @@ "Firmware Upgrade Available": "固件更新可用", "First Layer Optimization": "首层优化", "First Layer Support Extruder": "首层支撑喷嘴", - "Flame detected. Please short press the button to resume work when it is safe to do so. The sensitivity of the flame detection can be modified in the machine settings.": "Flame detected. Please short press the button to resume work when it is safe to do so. The sensitivity of the flame detection can be modified in the machine settings.", + "Flame detected. Please short press the button to resume work when it is safe to do so. The sensitivity of the flame detection can be modified in the machine settings.": "检测到火焰。请在安全情况下工作开关以恢复工作。可在机器设置中修改火焰检测的灵敏度。", "Flat": "平底铣刀", "Flow": "流量", - "Flow Equalization Ratio": "Flow Equalization Ratio", - "Flow Rate Compensation Factor": "Flow Rate Compensation Factor", - "Flow Rate Compensation Max Extrusion Offset": "Flow Rate Compensation Max Extrusion Offset", - "Flow Temperature Graph": "Flow Temperature Graph", - "Flush Purge Length": "Flush Purge Length", + "Flow Equalization Ratio": "流量均衡比", + "Flow Rate Compensation Factor": "流量补偿因子", + "Flow Rate Compensation Max Extrusion Offset": "流量补偿最大挤出偏移量", + "Flow Temperature Graph": "流量温度图", + "Flush Purge Length": "冲洗清除长度", "Flush Purge Speed": "冲洗清除速度", "For laser engraving, you can preview the toolpath.": "在激光预览视图中，可以看到工具路径。", "Front": "前面", @@ -278,24 +280,24 @@ "Griffin": "Griffin", "Gyroid": "螺旋二十四面体", "Half Diode Mode": "半二极管模式", - "Has Build Volume Temperature Stabilization": "Has Build Volume Temperature Stabilization", - "Has Heated Build Plate": "Has Heated Build Plate", + "Has Build Volume Temperature Stabilization": "具有构建体积温度稳定性", + "Has Heated Build Plate": "有加热打印平台", "Heat Up Speed": "加热速度", - "Heat Zone Length": "Heat Zone Length", - "Heated Bed Maximum Temperature": "Heated Bed Maximum Temperature", + "Heat Zone Length": "加热区长度", + "Heated Bed Maximum Temperature": "热床最高温度", "Helpers": "辅助结构", "Hide Seam": "隐藏接缝", "Hide or Expose Seam": "隐藏或暴露接缝", "Hole Horizontal Expansion": "孔洞水平扩展", "Horizontal": "水平", "Horizontal Expansion": "水平扩展", - "Horizontal Scaling Factor Shrinkage Compensation": "Horizontal Scaling Factor Shrinkage Compensation", + "Horizontal Scaling Factor Shrinkage Compensation": "水平缩放因子收缩补偿", "Imgae create failed.": "生成图片失败。", "Improvements": "改进", "In object origin mode, the origin is at the corners or center of the object.": "在对象原点模式下，原点在对象的边角或中心。", "In workpiece origin mode, the origin is at the corners or center of the workpiece.": "在工件原点模式下，原点在工件的边角或中心。", - "Include Build Plate Temperature": "Include Build Plate Temperature", - "Include Material Temperatures": "Include Material Temperatures", + "Include Build Plate Temperature": "包含打印平台温度", + "Include Material Temperatures": "包含材料温度", "Inclusive": "包含", "Infill": "填充", "Infill Acceleration": "填充加速度", @@ -321,7 +323,7 @@ "Infill X Offset": "填充 X 轴偏移量", "Infill Y Offset": "填充 Y 轴偏移量", "Initial Bottom Layers": "起始底部层数", - "Initial Cutting Height Offset": "Initial Cutting Height Offset", + "Initial Cutting Height Offset": " 初始切割高度偏移量", "Initial Fan Speed": "起始风扇速度", "Initial Layer Acceleration": "起始层加速度", "Initial Layer Bottom Flow": "起始层底层流量", @@ -341,20 +343,20 @@ "Initial Layer Travel Acceleration": "起始层空驶加速度", "Initial Layer Travel Jerk": "起始层空驶急动速度", "Initial Layer Travel Speed": "起始层空跑速度", - "Initial Layer Z Overlap": "Initial Layer Z Overlap", + "Initial Layer Z Overlap": "初始层 Z 重叠", "Initial Printing Temperature": "起始打印温度", "Inner Wall Acceleration": "内壁加速度", - "Inner Wall Extruder": "Inner Wall Extruder", + "Inner Wall Extruder": "内壁挤出机", "Inner Wall Jerk": "内壁急动速度", "Inner Wall Speed": "速度（内壁）", "Inner Wall(s) Flow": "内壁流量", "Inner Wall(s) Line Width": "走线宽度（内壁）", "Inside To Outside": "由内到外", - "Interlocking Beam Layer Count": "Interlocking Beam Layer Count", - "Interlocking Beam Width": "Interlocking Beam Width", - "Interlocking Boundary Avoidance": "Interlocking Boundary Avoidance", - "Interlocking Depth": "Interlocking Depth", - "Interlocking Structure Orientation": "Interlocking Structure Orientation", + "Interlocking Beam Layer Count": "互锁梁层数", + "Interlocking Beam Width": "互锁梁宽度", + "Interlocking Boundary Avoidance": "互锁边界回避", + "Interlocking Depth": "互锁深度", + "Interlocking Structure Orientation": "互锁结构方向", "Iron Only Highest Layer": "仅熨平最高层", "Ironing Acceleration": "熨平加速度", "Ironing Flow": "熨平流量", @@ -363,39 +365,40 @@ "Ironing Line Spacing": "熨平走线间距", "Ironing Pattern": "熨平图案", "Ironing Speed": "熨平速度", - "Is Center Origin": "Is Center Origin", + "Is Center Origin": "位于中心", "Job Offset": "作业偏移", "Job Offset Mode": "作业偏移模式", "Jog Height": "点动高度", "Jog Speed": "点动速度", - "Keep Disconnected Faces": "Keep Disconnected Faces", - "Keep Laser On When Moving": "Keep Laser On When Moving", + "Keep Disconnected Faces": "保留断开连接的面", + "Keep Laser On When Moving": "移动时保持激光处于开启状态", "Keep the device attended while it is in use!": "使用设备时，请保持有人值守！", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "对象超过工作尺寸，是否缩放至合适尺寸？", "Key-Laser/ImportScale-Scale To Fit": "缩放适应", - "Key-Workspace/LaserStartJob-manual_mode_description": "Key-Workspace/LaserStartJob-manual_mode_description", - "Knot": "Knot", - "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.", - "Laser Locked. Please unlock it on the controller.": "Laser Locked. Please unlock it on the controller.", - "Laser PCBA Overheat. Please power off the machine, wait for a while, and restart. If this occurs frequently, contact our Support for help.": "Laser PCBA Overheat. Please power off the machine, wait for a while, and restart. If this occurs frequently, contact our Support for help.", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", + "Key-Workspace/LaserStartJob-manual_mode_description": "手动模式描述", + "Knot": "结点", + "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "激光发射器过热。请关闭机器，等待一段时间，然后重新启动。如果这种情况频繁发生，请联系我们的支持团队寻求帮助。", + "Laser Locked. Please unlock it on the controller.": "激光已锁定。请在控制器上解锁。", + "Laser PCBA Overheat. Please power off the machine, wait for a while, and restart. If this occurs frequently, contact our Support for help.": "激光 PCBA 过热。请关闭机器，等待一段时间，然后重新启动。如果这种情况频繁发生，请联系我们的支持团队寻求帮助。", "Laser Power": "激光功率", "Laser Power Level Divisions": "激光功率级别划分", "Laser Spot": "激光光点", "Latest firmware version": "最新固件版本", "Layer Height": "层高", - "Layer Start X": "Layer Start X", - "Layer Start Y": "Layer Start Y", + "Layer Start X": "层起始 X 坐标", + "Layer Start Y": "层起始 Y 坐标", "Left": "左侧", "Left Extruder": "左挤出机", "Lift Head": "执行头抬升", - "Lightning": "Lightning", - "Lightning Infill Overhang Angle": "Lightning Infill Overhang Angle", - "Lightning Infill Prune Angle": "Lightning Infill Prune Angle", - "Lightning Infill Straightening Angle": "Lightning Infill Straightening Angle", - "Lightning Infill Support Angle": "Lightning Infill Support Angle", + "Lightning": "闪电形", + "Lightning Infill Overhang Angle": "闪电填充悬垂角", + "Lightning Infill Prune Angle": "闪电填充修剪角", + "Lightning Infill Straightening Angle": "闪电填充矫直角", + "Lightning Infill Support Angle": "闪电填充支撑角", "Limit Support Retractions": "限制支撑回抽", "Limit tool location by object boundary \n - Tangent to Boundary: Tool is located inside the machining boundary \n - Past Boundary: tool can exceed machining boundary": "选择不同的加工效果，刀具将对模型边框做不同的处理。\n - 模型与边框相连: 刀具仅切割模型，不切割模型外部的边框。加工成品将与边框相连。\n - 模型与边框分离: 刀具对模型及其外部的边框都进行切割。加工成品将与边框分离。", - "Limited": "Limited", + "Limited": "有限", "Line": "线条", "Line Direction": "线条方向", "Line Width": "走线宽度", @@ -406,73 +409,73 @@ "Machine Control": "机器控制", "Machine Depth": "机器深度", "Machine Firmware": "机器固件", - "Machine Head & Fan Polygon": "Machine Head & Fan Polygon", - "Machine Height": "Machine Height", + "Machine Head & Fan Polygon": "机器执行头和风扇多边形", + "Machine Height": "机器高度", "Machine Log": "机器日志", "Machine Maximum Print Temperature": "机器最大打印温度", "Machine Network": "机器网络", "Machine Settings": "机器设置", "Machine Type": "机器类型", "Machine Width": "机器宽度", - "Make Overhang Printable": "Make Overhang Printable", + "Make Overhang Printable": "使悬垂可打印", "Makerbot": "Makerbot", "Manual Mode": "手动模式", "Marlin": "Marlin", - "Marlin (Volumetric)": "Marlin (Volumetric)", - "Material": "Material", - "Material GUID": "Material GUID", - "Material Info": "Material Info", - "Material Print Temperature Wait Range": "Material Print Temperature Wait Range", - "Material Print Temperature Wait Time": "Material Print Temperature Wait Time", + "Marlin (Volumetric)": "Marlin（容积）", + "Material": "材料", + "Material GUID": "材料 GUID", + "Material Info": "材料信息", + "Material Print Temperature Wait Range": "材料打印温度等待范围", + "Material Print Temperature Wait Time": "材料打印温度等待时长", "Material Type": "材料类型", - "Material Volume Between Wipes": "Material Volume Between Wipes", + "Material Volume Between Wipes": "擦拭之间的材料量", "Max Comb Distance With No Retract": "最大梳距，无回抽", - "Maximum Acceleration B": "Maximum Acceleration B", - "Maximum Acceleration X": "Maximum Acceleration X", - "Maximum Acceleration Y": "Maximum Acceleration Y", - "Maximum Acceleration Z": "Maximum Acceleration Z", - "Maximum Deviation": "Maximum Deviation", - "Maximum Extrusion Area Deviation": "Maximum Extrusion Area Deviation", + "Maximum Acceleration B": "B 轴最大加速度", + "Maximum Acceleration X": "X 轴最大加速度", + "Maximum Acceleration Y": "Y 轴最大加速度", + "Maximum Acceleration Z": "Z 轴最大加速度", + "Maximum Deviation": "最大偏差", + "Maximum Extrusion Area Deviation": "最大挤出面积偏差", "Maximum Fan Speed": "最大风扇速度", - "Maximum Feedrate": "Maximum Feedrate", - "Maximum Filament Acceleration": "Maximum Filament Acceleration", - "Maximum Model Angle": "Maximum Model Angle", - "Maximum Overhang Hole Area": "Maximum Overhang Hole Area", - "Maximum Park Duration": "Maximum Park Duration", - "Maximum Resolution": "Maximum Resolution", + "Maximum Feedrate": "最大进给速度", + "Maximum Filament Acceleration": "挤出电机最大加速度", + "Maximum Model Angle": "最大模型角度", + "Maximum Overhang Hole Area": "最大悬垂孔面积", + "Maximum Park Duration": "最长停放持续时间", + "Maximum Resolution": "最大分辨率", "Maximum Retraction Count": "最大回抽计数", - "Maximum Skin Angle for Expansion": "Maximum Skin Angle for Expansion", - "Maximum Speed B": "Maximum Speed B", - "Maximum Speed E": "Maximum Speed E", - "Maximum Speed X": "Maximum Speed X", - "Maximum Speed Y": "Maximum Speed Y", - "Maximum Speed Z": "Maximum Speed Z", - "Maximum Speed for Flow Equalization": "Maximum Speed for Flow Equalization", + "Maximum Skin Angle for Expansion": "最大扩展皮肤角度", + "Maximum Speed B": "B 轴最大速度", + "Maximum Speed E": "E 轴最大速度", + "Maximum Speed X": "X 轴最大速度", + "Maximum Speed Y": "Y 轴最大速度", + "Maximum Speed Z": "Z 轴最大速度", + "Maximum Speed for Flow Equalization": "流量均衡的最大速度", "Maximum Tower-Supported Diameter": "最大塔支撑直径", - "Maximum Travel Resolution": "Maximum Travel Resolution", + "Maximum Travel Resolution": "空驶的最大分辨率", "Merged": "合并", - "Merged Meshes Overlap": "Merged Meshes Overlap", - "Mesh Fixes": "Mesh Fixes", - "Mesh Position X": "Mesh Position X", - "Mesh Position Y": "Mesh Position Y", - "Mesh Position Z": "Mesh Position Z", - "Mesh Processing Rank": "Mesh Processing Rank", - "Mesh Rotation Matrix": "Mesh Rotation Matrix", + "Merged Meshes Overlap": "合并网格重叠", + "Mesh Fixes": "网格修复", + "Mesh Position X": "网格 X 位置", + "Mesh Position Y": "网格 Y 位置", + "Mesh Position Z": "网格 Z 位置", + "Mesh Processing Rank": "网格处理等级", + "Mesh Rotation Matrix": "网格旋转矩阵", "Method": "加工方法", - "Middle": "Middle", - "Minimal Mold Width": "Minimal Mold Width", - "Minimal Time Standby Temperature": "Minimal Time Standby Temperature", + "Middle": "中间", + "Minimal Mold Width": "最小模具宽度", + "Minimal Time Standby Temperature": "最短时间待机温度", "Minimum Bridge Wall Length": "最小桥壁长度", "Minimum Even Wall Line Width": "最小均匀壁线宽", "Minimum Extrusion Distance Window": "最小挤出距离范围", "Minimum Feature Size": "最小特征大小", - "Minimum Feedrate": "Minimum Feedrate", - "Minimum Infill Area": "Minimum Infill Area", + "Minimum Feedrate": "最小进料速率", + "Minimum Infill Area": "最小填充区域", "Minimum Laser Power": "最小激光功率", "Minimum Layer Time": "每层最短冷却时间", "Minimum Odd Wall Line Width": "最小奇数墙线宽", - "Minimum Polygon Circumference": "Minimum Polygon Circumference", - "Minimum Skin Width for Expansion": "Minimum Skin Width for Expansion", + "Minimum Polygon Circumference": "最小多边形周长", + "Minimum Skin Width for Expansion": "最小扩展皮肤宽度", "Minimum Speed": "最小打印速度", "Minimum Support Area": "最小支撑面积", "Minimum Support Floor Area": "最小支撑底板面积", @@ -480,64 +483,65 @@ "Minimum Support Roof Area": "最小支撑顶板面积", "Minimum Support X/Y Distance": "最小支撑 X/Y 距离", "Minimum Thin Wall Line Width": "最小墙线宽", - "Minimum Volume Before Coasting": "Minimum Volume Before Coasting", + "Minimum Volume Before Coasting": "滑行前最小体积", "Minimum Wall Line Width": "最小墙线宽", "Mode": "打印模式", "Model Structure": "模型结构", - "Model Structure Optimization": "Model Structure Optimization", + "Model Structure Optimization": "模型结构优化", "Model Structure Type": "模型结构", - "Mold": "Mold", - "Mold Angle": "Mold Angle", - "Mold Roof Height": "Mold Roof Height", + "Mold": "模具", + "Mold Angle": "模具角度", + "Mold Roof Height": "模具顶板高度", "Monotonic Ironing Order": "单调熨烫打印", - "Monotonic Top Surface Order": "Monotonic Top Surface Order", + "Monotonic Top Surface Order": "单调顶部表面顺序", "Monotonic Top/Bottom Order": "单调顶/底打印", "More Settings": "更多设置", + "Motor Power Hold": "Motor Power Hold", "Movement Mode": "移动模式", "Network": "网络", "New Features": "新功能", "No": "否", - "No Load Move Factor": "No Load Move Factor", + "No Load Move Factor": "空载移动系数", "No Skin in Z Gaps": "Z 间隙内无皮肤", - "No use": "No use", + "No use": "无效", "None": "无", "Normal": "正常结构", "Not Connected": "未连接", "Not in Skin": "不经过皮肤", "Not on Outer Surface": "不在外表面", - "Nozzle Angle": "Nozzle Angle", + "Nozzle Angle": "喷嘴角度", "Nozzle Assignment": "喷嘴分配", "Nozzle Diameter": "喷嘴直径", - "Nozzle Disallowed Areas": "Nozzle Disallowed Areas", - "Nozzle ID": "Nozzle ID", - "Nozzle Length": "Nozzle Length", + "Nozzle Disallowed Areas": "喷嘴不允许区域", + "Nozzle ID": "喷嘴 ID", + "Nozzle Length": "喷嘴长度", "Nozzle Switch Extra Prime Amount": "喷嘴切换额外装填量", "Nozzle Switch Prime Speed": "喷嘴切换装填速度", "Nozzle Switch Retract Speed": "喷嘴切换回抽速度", "Nozzle Switch Retraction Distance": "喷嘴切换回抽距离", "Nozzle Switch Retraction Speed": "喷嘴切换回抽速度", - "Nozzle X Offset": "Nozzle X Offset", - "Nozzle Y Offset": "Nozzle Y Offset", - "Number of Extruders": "Number of Extruders", - "Number of Extruders That Are Enabled": "Number of Extruders That Are Enabled", + "Nozzle X Offset": "喷嘴 X 偏移量", + "Nozzle Y Offset": "喷嘴 Y 偏移量", + "Number of Extruders": "挤出机数目", + "Number of Extruders That Are Enabled": "已启用的挤出机数目", "Number of Passes": "通过次数", "Number of Slower Layers": "较慢层的数量", - "Nylon": "Nylon", + "Nylon": "尼龙", "Octet": "八角形", "Off": "关闭", - "Offset with Extruder": "Offset with Extruder", + "Offset with Extruder": "挤出机偏移量", "On the Path": "沿着路径", - "One at a Time": "One at a Time", + "One at a Time": "排队打印", "Ooze Shield": "渗出罩", "Ooze Shield Angle": "渗出罩角度", "Ooze Shield Distance": "渗出罩距离", "Optimize Wall Printing Order": "优化壁打印顺序", - "Other": "Other", - "Outer Nozzle Diameter": "Outer Nozzle Diameter", + "Other": "其他", + "Outer Nozzle Diameter": "喷嘴外径", "Outer Wall Acceleration": "外壁加速度", - "Outer Wall Extruder": "Outer Wall Extruder", + "Outer Wall Extruder": "外壁挤出机", "Outer Wall Flow": "外壁流量", - "Outer Wall Inset": "Outer Wall Inset", + "Outer Wall Inset": "外壁嵌入", "Outer Wall Jerk": "外壁急动速度", "Outer Wall Line Width": "走线宽度（壁）", "Outer Wall Speed": "速度（外壁）", @@ -547,8 +551,8 @@ "Over Scanning": "过扫描", "Overhanging Wall Angle": "悬垂壁角度", "Overhanging Wall Speed": "悬垂壁速度", - "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.", - "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.", + "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "超出限制。X 轴限位开关触发。运动范围超出机器边界。如果在加工过程中发生，请调整机器的原点位置或确认 G-code 是否正确。", + "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "超出限制。Y 轴限位开关触发。运动范围超出机器边界。如果在加工过程中发生，请调整机器的原点位置或确认 G-code 是否正确。", "PC": "PC", "PETG": "PETG", "PLA": "PLA", @@ -577,8 +581,8 @@ "Print Acceleration": "打印加速度", "Print Jerk": "打印急动速度", "Print Mode": "打印模式", - "Print Sequence": "Print Sequence", - "Print Settings": "Print Settings", + "Print Sequence": "打印序列", + "Print Settings": "打印设置", "Print Speed": "打印速度", "Print Thin Walls": "打印薄壁", "Printing Speed": "打印速度", @@ -587,57 +591,57 @@ "Quality": "品质", "Quarter Cubic": "四面体", "Raft": "多层粘附", - "Raft Air Gap": "Raft Air Gap", - "Raft Base Extruder": "Raft Base Extruder", - "Raft Base Fan Speed": "Raft Base Fan Speed", - "Raft Base Line Spacing": "Raft Base Line Spacing", - "Raft Base Line Width": "Raft Base Line Width", - "Raft Base Print Acceleration": "Raft Base Print Acceleration", - "Raft Base Print Jerk": "Raft Base Print Jerk", - "Raft Base Print Speed": "Raft Base Print Speed", - "Raft Base Thickness": "Raft Base Thickness", - "Raft Base Wall Count": "Raft Base Wall Count", + "Raft Air Gap": "Raft 空隙", + "Raft Base Extruder": "Raft 底部挤出机", + "Raft Base Fan Speed": "Raft 基础风扇速度", + "Raft Base Line Spacing": "Raft 基础走线间距", + "Raft Base Line Width": "Raft 基础走线宽度", + "Raft Base Print Acceleration": "Raft 基础打印加速度", + "Raft Base Print Jerk": "Raft 基础打印抖动速度", + "Raft Base Print Speed": "Raft 基础打印速度", + "Raft Base Thickness": "Raft 基础厚度", + "Raft Base Wall Count": "Raft 底板壁数", "Raft Extra Margin": "多层粘附留白", - "Raft Fan Speed": "Raft Fan Speed", - "Raft Middle Extruder": "Raft Middle Extruder", - "Raft Middle Fan Speed": "Raft Middle Fan Speed", - "Raft Middle Layers": "Raft Middle Layers", - "Raft Middle Line Width": "Raft Middle Line Width", - "Raft Middle Print Acceleration": "Raft Middle Print Acceleration", - "Raft Middle Print Jerk": "Raft Middle Print Jerk", - "Raft Middle Print Speed": "Raft Middle Print Speed", - "Raft Middle Spacing": "Raft Middle Spacing", - "Raft Middle Thickness": "Raft Middle Thickness", - "Raft Print Acceleration": "Raft Print Acceleration", - "Raft Print Jerk": "Raft Print Jerk", - "Raft Print Speed": "Raft Print Speed", - "Raft Smoothing": "Raft Smoothing", - "Raft Top Extruder": "Raft Top Extruder", - "Raft Top Fan Speed": "Raft Top Fan Speed", - "Raft Top Layer Thickness": "Raft Top Layer Thickness", - "Raft Top Layers": "Raft Top Layers", - "Raft Top Line Width": "Raft Top Line Width", - "Raft Top Print Acceleration": "Raft Top Print Acceleration", - "Raft Top Print Jerk": "Raft Top Print Jerk", - "Raft Top Print Speed": "Raft Top Print Speed", - "Raft Top Spacing": "Raft Top Spacing", + "Raft Fan Speed": "Raft 风扇速度", + "Raft Middle Extruder": "Raft 中间挤出机", + "Raft Middle Fan Speed": "Raft 中间风扇速度", + "Raft Middle Layers": "Raft 中间层", + "Raft Middle Line Width": "Raft 中间线宽度", + "Raft Middle Print Acceleration": "Raft 中间打印加速度", + "Raft Middle Print Jerk": "Raft 中间打印抖动速度", + "Raft Middle Print Speed": "Raft 中间打印速度", + "Raft Middle Spacing": "Raft 中间间距", + "Raft Middle Thickness": "Raft 中间厚度", + "Raft Print Acceleration": "Raft 打印加速度", + "Raft Print Jerk": "Raft 打印抖动速度", + "Raft Print Speed": "Raft 打印速度", + "Raft Smoothing": "Raft 平滑度", + "Raft Top Extruder": "Raft 顶部挤出机", + "Raft Top Fan Speed": "Raft 顶部风扇速度", + "Raft Top Layer Thickness": "Raft 顶层厚度", + "Raft Top Layers": "Raft 顶层", + "Raft Top Line Width": "Raft 顶部线宽度", + "Raft Top Print Acceleration": "Raft 顶部打印加速度", + "Raft Top Print Jerk": "Raft 顶部打印抖动速度", + "Raft Top Print Speed": "Raft 顶部打印速度", + "Raft Top Spacing": "Raft 顶部间距", "Random": "随机", - "Randomize Infill Start": "Randomize Infill Start", - "Rectangular": "Rectangular", + "Randomize Infill Start": "开始随机化填充", + "Rectangular": "矩形", "Regular Fan Speed": "正常风扇速度", - "Regular Fan Speed at Height": "Regular Fan Speed at Height", + "Regular Fan Speed at Height": "正常风扇速度（高度）", "Regular Fan Speed at Layer": "正常风扇速度（层）", "Regular/Maximum Fan Speed Threshold": "正常/最大风扇速度阈值", - "Relative Extrusion": "Relative Extrusion", + "Relative Extrusion": "相对挤出", "Reliable": "可靠性优先", "Removable": "可拆卸性优先", - "Remove All Holes": "Remove All Holes", - "Remove Empty First Layers": "Remove Empty First Layers", - "Remove Mesh Intersection": "Remove Mesh Intersection", - "Remove Raft Inside Corners": "Remove Raft Inside Corners", + "Remove All Holes": "移除所有孔洞", + "Remove Empty First Layers": "移除空白第一层", + "Remove Mesh Intersection": "移除网格交叉", + "Remove Raft Inside Corners": "移除 Raft 内侧角", "RepRap": "RepRap", "Repetier": "Repetier", - "Retract": "Retract", + "Retract": "回抽", "Retract & Z Hop": "回抽与 Z 抬升", "Retract Before Outer Wall": "经过外壁前回抽", "Retract at Layer Change": "层变化时回抽", @@ -650,10 +654,11 @@ "Right": "右侧", "Right Extruder": "右挤出机", "Run Boundary": "跑边框", - "Scale Fan Speed To 0-1": "Scale Fan Speed To 0-1", - "Scaling Factor Shrinkage Compensation": "Scaling Factor Shrinkage Compensation", + "Save": "保存", + "Scale Fan Speed To 0-1": "在 0 到 1 范围内设置风扇速度", + "Scaling Factor Shrinkage Compensation": "缩放因子收缩补偿", "Scan Offset": "扫描偏移", - "Scene Has Support Meshes": "Scene Has Support Meshes", + "Scene Has Support Meshes": "场景具有支撑网格", "Seam Corner Preference": "缝隙角偏好设置", "Select the slicing mode of the mesh toolpath": "设置3D模型的加工方法", "Select the way that the dots are arranged.\n- Line: Dots are arranged into lines.\n- Round: Dots are arranged into rounds.\n- Diamond: Dots are arranged into diamonds.": "选择点的排列方式。\n- 线条：将点排列成线条。\n- 圆形：将点排列成圆形。\n- 菱形：将点排列成菱形。", @@ -689,68 +694,68 @@ "Settings": "设置", "Shaft Diameter": "刀柄直径 (SD)", "Shank Diameter": "刀柄直径 (SD)", - "Shared Nozzle Initial Retraction": "Shared Nozzle Initial Retraction", + "Shared Nozzle Initial Retraction": "共用喷嘴初始回抽", "Sharpest Corner": "最尖角", "Shell": "外壳", "Shortest": "最短", - "Show Machine Variants": "Show Machine Variants", + "Show Machine Variants": "显示打印机变体", "Skin Edge Support Layers": "皮肤边缘支持层数", - "Skin Edge Support Thickness": "Skin Edge Support Thickness", - "Skin Expand Distance": "Skin Expand Distance", + "Skin Edge Support Thickness": "皮肤边缘支撑厚度", + "Skin Expand Distance": "皮肤扩展距离", "Skin Overlap": "皮肤重叠", "Skin Overlap Percentage": "皮肤重叠百分比", - "Skin Removal Width": "Skin Removal Width", + "Skin Removal Width": "皮肤移除宽度", "Skirt": "裙边粘附", "Skirt Distance": "裙边距离", "Skirt Line Count": "裙边走线计数", "Skirt/Brim Acceleration": "裙边/单层粘附加速度", - "Skirt/Brim Extruder": "Skirt/Brim Extruder", + "Skirt/Brim Extruder": "Skirt/Brim 挤出机", "Skirt/Brim Flow": "裙边/单层粘附流量", "Skirt/Brim Jerk": "裙边/单层粘附急动速度", "Skirt/Brim Line Width": "走线宽度（裙边/单层粘附）", "Skirt/Brim Minimum Length": "裙边/单层粘附最小长度", "Skirt/Brim Speed": "裙边/单层粘附速度", - "Slanting Toolhead. Please reinstall the toolhead and make sure it does not slant in any direction. If this occurs frequently, contact our Support for help.": "Slanting Toolhead. Please reinstall the toolhead and make sure it does not slant in any direction. If this occurs frequently, contact our Support for help.", + "Slanting Toolhead. Please reinstall the toolhead and make sure it does not slant in any direction. If this occurs frequently, contact our Support for help.": "执行头倾斜。请重新安装执行头，并确保它在任何方向上都不倾斜。如果这种情况频繁发生，请联系我们的支持团队寻求帮助。", "Slicing Mode": "切片模式", - "Slicing Tolerance": "Slicing Tolerance", + "Slicing Tolerance": "切片公差", "Small Feature Initial Layer Speed": "起始层微小特征速度", "Small Feature Max Length": "小特征最大长度", "Small Feature Speed": "微小特征速度", - "Small Hole Max Size": "Small Hole Max Size", - "Small Layer Printing Temperature": "Small Layer Printing Temperature", + "Small Hole Max Size": "小孔最大尺寸", + "Small Layer Printing Temperature": "小型层打印温度", "Smart Hiding": "智能隐藏", - "Smooth Spiralized Contours": "Smooth Spiralized Contours", - "Special Modes": "Special Modes", + "Smooth Spiralized Contours": "平滑螺旋轮廓", + "Special Modes": "特殊模式", "Speed": "速度", "Spiralize Outer Contour": "螺旋打印外轮廓", "Standby Temperature": "待机温度", - "Start G-code": "Start G-code", + "Start G-code": "开始 G-code", "Start on Luban": "在线作业", "Step down": "下降步距", "Stepdown": "下降步距", "Stepover": "行距", "Steppers are disabled. You can push XY axes to move the tool head.": "电机已失能，你可以推动 XY 轴来移动执行头。", - "Steps per Millimeter (E)": "Steps per Millimeter (E)", - "Steps per Millimeter (X)": "Steps per Millimeter (X)", - "Steps per Millimeter (Y)": "Steps per Millimeter (Y)", - "Steps per Millimeter (Z)": "Steps per Millimeter (Z)", + "Steps per Millimeter (E)": "每毫米步数 (E)", + "Steps per Millimeter (X)": "每毫米步数 (X)", + "Steps per Millimeter (Y)": "每毫米步数 (Y)", + "Steps per Millimeter (Z)": "每毫米步数 (Z)", "Stop Height": "停止高度", "Stop job": "停止作业", - "Support": "Support", - "Support Acceleration": "Support Acceleration", + "Support": "支撑", + "Support Acceleration": "支撑加速度", "Support Bottom Distance": "支撑底部距离", - "Support Bottom Wall Line Count": "Support Bottom Wall Line Count", + "Support Bottom Wall Line Count": "支撑底部墙线条数", "Support Brim Line Count": "支撑单层粘附走线次数", "Support Brim Width": "支撑单层粘附宽度", - "Support Chunk Line Count": "Support Chunk Line Count", - "Support Chunk Size": "Support Chunk Size", + "Support Chunk Line Count": "支撑块走线数", + "Support Chunk Size": "支撑块大小", "Support Density": "支撑密度", "Support Distance Priority": "支撑距离优先级", - "Support Extruder": "Support Extruder", - "Support Fine-tuning": "Support Fine-tuning", + "Support Extruder": "支撑用挤出机", + "Support Fine-tuning": "支撑结构微调", "Support Floor Acceleration": "支撑底板加速度", - "Support Floor Density": "Support Floor Density", - "Support Floor Extruder": "Support Floor Extruder", + "Support Floor Density": "支撑底板密度", + "Support Floor Extruder": "支撑底板挤出机", "Support Floor Flow": "支撑底板流量", "Support Floor Horizontal Expansion": "支撑底板水平扩展", "Support Floor Jerk": "支撑底板急动速度", @@ -763,36 +768,36 @@ "Support Flow": "支撑流量", "Support Horizontal Expansion": "支撑水平扩展", "Support Infill Acceleration": "支撑填充加速度", - "Support Infill Extruder": "Support Infill Extruder", + "Support Infill Extruder": "支撑填充挤出机", "Support Infill Jerk": "支撑填充急动速度", "Support Infill Layer Thickness": "支撑填充层厚度", "Support Infill Line Directions": "支撑填充走线方向", "Support Infill Speed": "速度（支撑填充）", - "Support Interface Acceleration": "Support Interface Acceleration", + "Support Interface Acceleration": "支撑接触面加速度", "Support Interface Density": "支撑接触面密度", - "Support Interface Extruder": "Support Interface Extruder", - "Support Interface Flow": "Support Interface Flow", + "Support Interface Extruder": "支撑接触面挤出机", + "Support Interface Flow": "支撑接触面流量", "Support Interface Horizontal Expansion": "支撑接触面水平扩展", - "Support Interface Jerk": "Support Interface Jerk", + "Support Interface Jerk": "支撑接触面抖动速度", "Support Interface Line Directions": "支撑接触面走线方向", - "Support Interface Line Width": "Support Interface Line Width", + "Support Interface Line Width": "走线宽度（支撑接触面）", "Support Interface Pattern": "支撑接触面图案", "Support Interface Resolution": "支撑接触面分辨率", - "Support Interface Speed": "Support Interface Speed", + "Support Interface Speed": "支撑接触面速度", "Support Interface Thickness": "支撑接触面厚度", - "Support Interface Wall Line Count": "Support Interface Wall Line Count", - "Support Jerk": "Support Jerk", + "Support Interface Wall Line Count": "支撑接触面墙线条数", + "Support Jerk": "支撑抖动速度", "Support Join Distance": "支撑结合距离", "Support Line Distance": "支撑走线距离", "Support Line Width": "走线宽度（支撑结构）", - "Support Mesh": "Support Mesh", + "Support Mesh": "支撑网格", "Support Overhang Angle": "支撑悬垂角度", "Support Pattern": "支撑图案", "Support Placement": "支撑放置", "Support Preference": "支撑偏好设置", "Support Roof Acceleration": "支撑顶板加速度", - "Support Roof Density": "Support Roof Density", - "Support Roof Extruder": "Support Roof Extruder", + "Support Roof Density": "支撑顶板密度", + "Support Roof Extruder": "支撑顶板挤出机", "Support Roof Flow": "支撑顶板流量", "Support Roof Horizontal Expansion": "支撑顶板水平扩展", "Support Roof Jerk": "支撑顶板急动速度", @@ -802,8 +807,8 @@ "Support Roof Pattern": "支撑顶板图案", "Support Roof Speed": "支撑顶板速度", "Support Roof Thickness": "支撑顶板厚度", - "Support Roof Wall Line Count": "Support Roof Wall Line Count", - "Support Speed": "Support Speed", + "Support Roof Wall Line Count": "支撑顶板墙线条数", + "Support Speed": "支撑结构速度", "Support Stair Step Height": "支撑梯步阶高度", "Support Stair Step Maximum Width": "支撑梯步阶最大宽度", "Support Stair Step Minimum Slope Angle": "支撑阶梯最小坡度角", @@ -815,7 +820,7 @@ "Support Z Distance": "支撑 Z 距离", "Supported Skin Fan Speed": "被支撑皮肤的风扇速度", "Surface": "表面", - "Surface Energy": "Surface Energy", + "Surface Energy": "表面能", "Surface Mode": "表面模式", "TPE": "TPE", "TPU": "TPU", @@ -825,43 +830,46 @@ "Taking the object as the origin will take a certain location of the object as the origin. With the workpiece as the origin, a certain position of the workpiece will be used as the origin, and the relative position of the origin from the object will affect the final processing position.": "以对象为原点将会以对象的某个位置作为原点。而以工件为原点，则会以工件的某个位置作为原点，原点与对象的相对位置会影响最终加工位置。", "Tangent to Boundary": "模型与边框相连", "Target Depth": "目标深度", - "Temperature & Cooling": "Temperature & Cooling", - "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.", + "Temperature & Cooling": "温度 & 冷却", + "The Enclosure door is opened or Enclosure disconnected. Please close the door or power off the machine, replug the Enclosure.If there is no Enclosure, please turn off door detection in the machine setting.": "外罩门已打开或断开连接。请关闭外罩门或关闭机器电源，重新连接外罩。如果没有外罩，请在机器设置中关闭外罩门检测功能。", "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "摄像头尚未校准。请先在触控屏上进行摄像头校准。", "There are two types of origin mode.": "原点模式有两种。", "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "原点偏移模式有十字光模式和弱光模式两种。在大多数情况下，我们建议使用十字光模式，它会更加安全和易用。弱光模式仅建议在需要全行程加工时被使用。", + "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "双喷头 3D 打印模组有两个版本：一个适用于 Artisan 机型，一个适用于 Snapmaker 2.0 机型。如果你正在使用适配 Snapmaker 2.0 版本的双喷头 3D 打印模组，请勾选启用 3D 打印模组选项并点击保存。然后回到 3D 打印模组设置下拉框里选择所适配的双喷头模组的版本。", + "This mode requires homing to update the current machine coordinates. Would you like to continue?": "此模式下需要通过回home获取实时坐标，是否要继续？", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "该点 (X0, Y0) 是设计坐标系的原点，在机器上定位或设置的原点需要和该点重合。", + "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "为了使用新功能，建议您将固件版本升级到1.6.8或更高版本", "Tool Limiting": "加工效果", "Tool Type": "刀具类型", - "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.", - "Toolhead not detected. Please power off the machine, plug the toolhead into the controller, and restart. If the problem persists, contact our Support for help.": "Toolhead not detected. Please power off the machine, plug the toolhead into the controller, and restart. If the problem persists, contact our Support for help.", + "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "执行头断开连接。请关闭机器电源，重新接入执行头，并重新启动。如果问题仍然存在，请联系我们的支持团队寻求帮助。", + "Toolhead not detected. Please power off the machine, plug the toolhead into the controller, and restart. If the problem persists, contact our Support for help.": "未检测到执行头。请关闭机器电源，将执行头插入控制器，然后重新启动。如果问题仍然存在，请联系我们的支持团队寻求帮助。", "Top Layers": "顶部层数", - "Top Skin Expand Distance": "Top Skin Expand Distance", - "Top Skin Removal Width": "Top Skin Removal Width", + "Top Skin Expand Distance": "顶部皮肤扩展距离", + "Top Skin Removal Width": "顶部皮肤移除宽度", "Top Surface Skin Acceleration": "顶部表面皮肤加速度", - "Top Surface Skin Extruder": "Top Surface Skin Extruder", + "Top Surface Skin Extruder": "顶部表面皮肤挤出机", "Top Surface Skin Flow": "顶部表面皮肤流量", "Top Surface Skin Jerk": "顶部表面皮肤急动速度", "Top Surface Skin Layers": "顶部表面皮肤层数", - "Top Surface Skin Line Directions": "Top Surface Skin Line Directions", - "Top Surface Skin Line Width": "Top Surface Skin Line Width", - "Top Surface Skin Pattern": "Top Surface Skin Pattern", + "Top Surface Skin Line Directions": "顶部表面皮肤走线方向", + "Top Surface Skin Line Width": "顶部表面皮肤线宽", + "Top Surface Skin Pattern": "顶部表面皮肤图案", "Top Surface Skin Speed": "顶部表面皮肤速度", "Top Thickness": "顶部厚度", - "Top/Bottom": "Top/Bottom", + "Top/Bottom": "顶部/底部", "Top/Bottom Acceleration": "顶部/底部加速度", - "Top/Bottom Extruder": "Top/Bottom Extruder", + "Top/Bottom Extruder": "顶部/底部挤出机", "Top/Bottom Flow": "顶部/底部流量", "Top/Bottom Jerk": "顶部/底部急动速度", "Top/Bottom Line Directions": "顶部/底部走线方向", "Top/Bottom Line Width": "走线宽度（顶部/底部）", "Top/Bottom Pattern": "顶部/底部走线图案", "Top/Bottom Speed": "速度（顶部/底部）", - "Top/Bottom Thickness": "Top/Bottom Thickness", + "Top/Bottom Thickness": "顶部/底部厚度", "Touching Buildplate": "只在打印平台", "Tower Diameter": "塔直径", "Tower Roof Angle": "塔顶板角度", - "Travel": "Travel", + "Travel": "空驶", "Travel Acceleration": "空驶加速度", "Travel Avoid Distance": "空驶避让距离", "Travel Jerk": "空驶急动速度", @@ -872,14 +880,14 @@ "Tree Support Branch Diameter Angle": "树形支撑分支直径角度", "Tree Support Branch Distance": "树形支撑分支间距", "Tree Support Collision Resolution": "树形支撑碰撞分辨率", - "Tree Support Trunk Diameter": "Tree Support Trunk Diameter", + "Tree Support Trunk Diameter": "树形支撑主干直径", "Tri-Hexagon": "内六角", "Triangles": "三角形", - "Turn Off": "Turn Off", - "Turn On": "Turn On", + "Turn Off": "关闭", + "Turn On": "开启", "Ultimaker 2": "Ultimaker 2", - "Unclassified": "Unclassified", - "Union Overlapping Volumes": "Union Overlapping Volumes", + "Unclassified": "未分类的", + "Union Overlapping Volumes": "联合覆盖体积", "Upgrade": "升级", "Upgraded firmware successfully.": "升级固件成功。", "Upgrading": "升级中", @@ -888,78 +896,81 @@ "Use Tab": "使用夹持凸台", "Use Towers": "使用塔", "Use tabs to hold the pieces in place.": "使用夹持凸台固定材料碎片。", + "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "请使用控制面板来定位A点和B点", "User Specified": "用户制定", "V-bit": "V形刀尖", "Variable Line": "可变线", "Vase": "花瓶结构", "Vertical": "垂直", - "Vertical Scaling Factor Shrinkage Compensation": "Vertical Scaling Factor Shrinkage Compensation", - "WP Bottom Delay": "WP Bottom Delay", - "WP Bottom Printing Speed": "WP Bottom Printing Speed", - "WP Connection Flow": "WP Connection Flow", - "WP Connection Height": "WP Connection Height", - "WP Downward Printing Speed": "WP Downward Printing Speed", - "WP Drag Along": "WP Drag Along", - "WP Ease Upward": "WP Ease Upward", - "WP Fall Down": "WP Fall Down", - "WP Flat Delay": "WP Flat Delay", - "WP Flat Flow": "WP Flat Flow", - "WP Flow": "WP Flow", - "WP Horizontal Printing Speed": "WP Horizontal Printing Speed", - "WP Knot Size": "WP Knot Size", - "WP Nozzle Clearance": "WP Nozzle Clearance", - "WP Roof Drag Along": "WP Roof Drag Along", - "WP Roof Fall Down": "WP Roof Fall Down", - "WP Roof Inset Distance": "WP Roof Inset Distance", - "WP Roof Outer Delay": "WP Roof Outer Delay", - "WP Speed": "WP Speed", - "WP Straighten Downward Lines": "WP Straighten Downward Lines", - "WP Strategy": "WP Strategy", - "WP Top Delay": "WP Top Delay", - "WP Upward Printing Speed": "WP Upward Printing Speed", - "Wait for Build Plate Heatup": "Wait for Build Plate Heatup", - "Wait for Nozzle Heatup": "Wait for Nozzle Heatup", - "Wall Acceleration": "Wall Acceleration", + "Vertical Scaling Factor Shrinkage Compensation": "垂直缩放因子收缩补偿", + "WP Bottom Delay": "波形打印底部延迟时间", + "WP Bottom Printing Speed": "波形打印底部打印速度", + "WP Connection Flow": "波形打印连接流程", + "WP Connection Height": "波形打印连接高度", + "WP Downward Printing Speed": "波形打印下行打印速度", + "WP Drag Along": "波形打印拖拽", + "WP Ease Upward": "波形打印渐进上行", + "WP Fall Down": "波形打印渐进下行", + "WP Flat Delay": "波形打印平滑延迟", + "WP Flat Flow": "波形打印平稳流量", + "WP Flow": "波形打印流量", + "WP Horizontal Printing Speed": "波形打印水平打印速度", + "WP Knot Size": "波形打印结点大小", + "WP Nozzle Clearance": "波形打印喷嘴间隙", + "WP Roof Drag Along": "波形打印顶部拖拽", + "WP Roof Fall Down": "波形打印顶部下陷", + "WP Roof Inset Distance": "波形打印顶部内缩距离", + "WP Roof Outer Delay": "波形打印顶部外侧延迟", + "WP Speed": "波形打印速度", + "WP Straighten Downward Lines": "波形打印垂直线条校正", + "WP Strategy": "波形打印策略", + "WP Top Delay": "波形打印顶部延迟", + "WP Upward Printing Speed": "波形打印上行速度", + "Wait for Build Plate Heatup": "等待打印平台加热", + "Wait for Nozzle Heatup": "等待喷嘴加热", + "Wall Acceleration": "壁加速度", "Wall Distribution Count": "墙分布计数", - "Wall Extruder": "Wall Extruder", - "Wall Flow": "Wall Flow", - "Wall Jerk": "Wall Jerk", + "Wall Extruder": "壁挤出机", + "Wall Flow": "壁流量", + "Wall Jerk": "壁抖动速度", "Wall Line Count": "壁走线次数", "Wall Line Width": "走线宽度（壁）", "Wall Ordering": "壁打印顺序", - "Wall Speed": "Wall Speed", + "Wall Speed": "悬垂壁速度", "Wall Thickness": "壁厚", "Wall Transition Length": "墙过渡长度", "Wall Transitioning Filter Distance": "墙壁过渡过滤距离", "Wall Transitioning Filter Margin": "壁过渡滤波器裕量", "Wall Transitioning Threshold Angle": "墙过渡阈值角度", - "Walls": "Walls", + "Walls": "壁", + "Warm reminder": "提示", + "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "作业偏移模式为激光光点时暂不支持AB定位功能", "Wi-Fi Name": "Wi-Fi 名称", - "Wipe Brush X Position": "Wipe Brush X Position", - "Wipe Hop Speed": "Wipe Hop Speed", + "Wipe Brush X Position": "擦拭刷 X 轴坐标", + "Wipe Hop Speed": "擦拭抬升速度", "Wipe Inactive Nozzle on Prime Tower": "装填塔内擦拭待机喷嘴", - "Wipe Move Distance": "Wipe Move Distance", - "Wipe Nozzle Between Layers": "Wipe Nozzle Between Layers", - "Wipe Pause": "Wipe Pause", - "Wipe Repeat Count": "Wipe Repeat Count", - "Wipe Retraction Distance": "Wipe Retraction Distance", - "Wipe Retraction Enable": "Wipe Retraction Enable", + "Wipe Move Distance": "擦拭移动距离", + "Wipe Nozzle Between Layers": "层间擦拭喷嘴", + "Wipe Pause": "擦拭暂停", + "Wipe Repeat Count": "擦拭重复计数", + "Wipe Retraction Distance": "擦拭回抽距离", + "Wipe Retraction Enable": "启用擦拭回抽", "Wipe Retraction Extra Prime Amount": "擦拭回抽额外挤出量", "Wipe Retraction Prime Speed": "擦拭回抽擦除速度", - "Wipe Retraction Retract Speed": "Wipe Retraction Retract Speed", - "Wipe Retraction Speed": "Wipe Retraction Speed", - "Wipe Z Hop": "Wipe Z Hop", - "Wipe Z Hop Height": "Wipe Z Hop Height", - "Wire Printing": "Wire Printing", + "Wipe Retraction Retract Speed": "擦拭回抽期间的回抽速度", + "Wipe Retraction Speed": "擦拭回抽速度", + "Wipe Z Hop": "擦拭 Z 抬升", + "Wipe Z Hop Height": "擦拭 Z 抬升高度", + "Wire Printing": "线材打印", "Within Infill": "在填充内", "Work Speed": "工作速度", - "X Endstop in Positive Direction": "X Endstop in Positive Direction", + "X Endstop in Positive Direction": "正向 X 限位开关", "X/Y overrides Z": "X/Y 距离优先于 Z 距离", - "Y Endstop in Positive Direction": "Y Endstop in Positive Direction", + "Y Endstop in Positive Direction": "正向 Y 限位开关", "Yes": "是", "You need to manually move the toolhead to the desired XY work origin.": "你需要手动移动执行头到期望的 XY 工作原点位置。", "You need to use the Control panel to move the toolhead to the desired XY work origin.": "你需要使用控制面板移动执行头到期望的 XY 工作原点位置。", - "Z Endstop in Positive Direction": "Z Endstop in Positive Direction", + "Z Endstop in Positive Direction": "正向 Z 限位开关", "Z Hop After Extruder Switch": "挤出机切换后的 Z 抬升", "Z Hop After Extruder Switch Height": "挤出机切换后的 Z 抬升高度", "Z Hop Height": "Z 抬升高度", @@ -1027,7 +1038,7 @@ "key-App/Menu-Rename": "重命名", "key-App/Menu-Reset Configurations": "重置 3D 打印配置", "key-App/Menu-Run Engine Test": "运行切片引擎测试", - "key-App/Menu-Run Wifi Test": "Run Wifi Test", + "key-App/Menu-Run Wifi Test": "运行 Wifi 测试", "key-App/Menu-Save As": "另存为", "key-App/Menu-Save Project": "保存项目", "key-App/Menu-Select All": "全选", @@ -1065,7 +1076,7 @@ "key-App/Settings/General-Workspace Setting": "工作区设置", "key-App/Settings/MachineSettings-10W Laser": "10W 激光", "key-App/Settings/MachineSettings-1600mW Laser": "1600mW 激光", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "2.0 双喷头模组", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 双喷头模组", "key-App/Settings/MachineSettings-200mW Laser": "200mW 激光", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D 打印模组", "key-App/Settings/MachineSettings-3D Printing": "3D 打印", @@ -1073,7 +1084,6 @@ "key-App/Settings/MachineSettings-CNC": "CNC 加工", "key-App/Settings/MachineSettings-CNC Toolhead": "CNC 模组", "key-App/Settings/MachineSettings-Dimensions": "尺寸", - "key-App/Settings/MachineSettings-Dual Extruder Toolhead": "双喷头", "key-App/Settings/MachineSettings-Head": "执行头", "key-App/Settings/MachineSettings-High CNC": "高功率CNC", "key-App/Settings/MachineSettings-Laser": "激光加工", @@ -1261,6 +1271,7 @@ "key-CncLaser/JobSetup-Use Locking block": "使用定位块", "key-CncLaser/JobSetup-Width (X)": "宽（X）", "key-CncLaser/JobSetup-Work Origin": "工作原点", + "key-CncLaser/MainToolBar-A-B Position": "AB 定位", "key-CncLaser/MainToolBar-Add Background": "添加背景", "key-CncLaser/MainToolBar-Bottom": "置于底层", "key-CncLaser/MainToolBar-Camera Capture": "摄像捕捉", @@ -1445,6 +1456,9 @@ "key-Laser/CameraCaptureOriginal-Side Length": "边长", "key-Laser/CameraCaptureOriginal-Upload": "上传", "key-Laser/CameraCaptureOriginal_laser_module_not_connect_notice": "未连接激光模组。请尝试插入 USB 线后，通过<1>串行端口连接机器。", + "key-Laser/Control/ABPositionButton-Clear AB": "清除 AB", + "key-Laser/Control/ABPositionButton-Set A position": "设置 A 位置", + "key-Laser/Control/ABPositionButton-Set B position": "设置 B 位置", "key-Laser/Edit/ContextMenu-Arrange": "排列", "key-Laser/Edit/ContextMenu-Bring to Front": "置于顶层", "key-Laser/Edit/ContextMenu-Close": "关闭", @@ -1567,8 +1581,8 @@ "key-Luban/Preset/A single layer ring printed around the base of the model, not connected to the model. It can help prime the nozzle before the printing begins.": "环绕模型底部的单层线圈，不与模型相连，有助于喷头在正式打印时正常挤出耗材。", "key-Luban/Preset/A vertical column generated directly below the overhanging parts of the model. It applies to most models.": "竖直柱状，生成于模型垂悬部位的正下方。适用于绝大多数模型。", "key-Luban/Preset/Build Plate Adhesion Type": "打印平台附着类型", - "key-Luban/Preset/Enhances dimensional accuracy and overall strength of the model. It takes longer time, but produces robust prints with precise dimensions. This mode is suitable for printing precision machined parts.": "Enhances dimensional accuracy and overall strength of the model. It takes longer time, but produces robust prints with precise dimensions. This mode is suitable for printing precision machined parts.", - "key-Luban/Preset/Infill Density": "Infill Density", + "key-Luban/Preset/Enhances dimensional accuracy and overall strength of the model. It takes longer time, but produces robust prints with precise dimensions. This mode is suitable for printing precision machined parts.": "增强模型的尺寸精度和整体强度。它需要更长的时间，但可以产生具有精确尺寸的坚固打印件。此模式适用于打印精密加工零件。", + "key-Luban/Preset/Infill Density": "填充密度", "key-Luban/Preset/Layer Height": "层高", "key-Luban/Preset/Layer Height-Fine": "精细", "key-Luban/Preset/Layer Height-Medium": "中等", @@ -1587,9 +1601,9 @@ "key-Luban/Preset/Printing Quality": "打印质量", "key-Luban/Preset/Printing Time": "打印时间", "key-Luban/Preset/Prints all parts of the model integrally. The stronger the model is, the longer printing time it takes and more material it consumes. On the contrary, the thinner the model is, the shorter printing time it takes and less material it consumes.": "正常打印模型的所有结构。模型结构越坚固，打印时间越长，消耗材料越多；反之，模型结构越轻薄，打印时间越短，消耗材料越少。", - "key-Luban/Preset/Prints in a fast mode. The printing time is short, but the outcome might be rough.": "Prints in a fast mode. The printing time is short, but the outcome might be rough.", + "key-Luban/Preset/Prints in a fast mode. The printing time is short, but the outcome might be rough.": "以快速模式打印。打印时间很短，但结果可能较粗糙。", "key-Luban/Preset/Prints only the bottom layer and the outer wall of the model. The structure of the print is similar to that of a vase, with a bottom and a wall, but with no infill or top cover.": "仅打印模型的底部和外壁。打印成品的结构类似花瓶，具有底部和周围外壁，内部无填充，没有顶部。", - "key-Luban/Preset/Prints the surface of the model more meticulously. It takes longer time but produces higher-quality surface for the print.": "Prints the surface of the model more meticulously. It takes longer time but produces higher-quality surface for the print.", + "key-Luban/Preset/Prints the surface of the model more meticulously. It takes longer time but produces higher-quality surface for the print.": "更细致地打印模型的表面。它需要更长的时间，但可打印出更高质量的表面。", "key-Luban/Preset/Prints with general settings. The printing outcome has a standard quality.": "使用通用配置打印，打印标准质量的物件。", "key-Luban/Preset/Support Type": "支撑", "key-Luban/Preset/Support Type-None": "无支撑", @@ -1987,6 +2001,7 @@ "key-Workspace/Control/JogDistance-Decrease custom distance by one unit": "自定义移动距离减小一个单位", "key-Workspace/Control/JogDistance-Increase custom angle by one unit": "将自定义角度增加一个单位", "key-Workspace/Control/JogDistance-Increase custom distance by one unit": "将自定义距离增加一个单位", + "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "XY 轴偏移量", "key-Workspace/Control/JogDistance-XYZ Axis Travel Distance": "XYZ 轴偏移量", "key-Workspace/Control/KeypadOverlay-0.1x Move": "0.1x 移动", "key-Workspace/Control/KeypadOverlay-10x Move": "10x 移动", @@ -2007,7 +2022,7 @@ "key-Workspace/Enclosure-Door Detection": "开关门检测", "key-Workspace/Enclosure-Enclosure": "外罩", "key-Workspace/Enclosure-Exhaust Fan": "排气扇", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "关键-工作区/外罩-如果你关闭了开关门检测功能，你的任务将不会因某一外罩门板打开而暂停。", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "如果你关闭了开关门检测功能，你的任务将不会因某一外罩门板打开而暂停。", "key-Workspace/Enclosure-LED Strips": "LED 灯条", "key-Workspace/Fine-tuneWorkOrigin-Close": "关闭", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "确定机器工作时的移动速度。", @@ -2048,6 +2063,7 @@ "key-Workspace/Input password": "输入密码", "key-Workspace/Laser-high_power_tips": "开启激光后，激光功率将设为最小值。", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "自动模式下，机器将测量材料厚度并自动对焦，随后开始作业。<1>非自动模式下，机器将依据输入的材料厚度完成对焦，随后开始作业。<3>安全提示：使用前，请确保机器已安装外罩，操作者和旁观者均已佩戴激光护目镜。", + "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "在<1>控制中设置工作原点，调节对焦杆使其触碰材料，当旋钮上方的横线对齐刻度 0 或者 Focus 时，焦点（红外激光不可见）将落在材料表面。若没有重新设置工作原点，则机器将使用与上次作业相同的工作原点。", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "材料厚度", "key-Workspace/LaserStartJob-3axis_start_job_prompt": "自动模式下，机器将依据输入的材料厚度完成自动对焦，并开始作业。<1>非自动模式下，机器将使用现有原点开始作业。请确保在开始前已设定工作原点。<3>安全提示：使用前，请确保机器已安装外罩，操作者和旁观者均已佩戴激光护目镜。", "key-Workspace/LaserStartJob-4axis_start_job_prompt": "机器将使用现有原点开始作业。请确保在开始前已设定工作原点。<1>安全提示：使用前，请确保机器已安装外罩，操作者和旁观者均已佩戴激光护目镜。", @@ -2173,11 +2189,17 @@ "key-default_category-ABS": "ABS", "key-default_category-ASA": "ASA", "key-default_category-Acrylic": "亚克力", + "key-default_category-Aluminium-1060": "铝1060", + "key-default_category-Aluminium-5052": "铝5052", + "key-default_category-Aluminium-6061": "铝6061", "key-default_category-Basswood": "椴木", + "key-default_category-Beech": "山毛榉", "key-default_category-Black Acrylic": "黑色亚克力", "key-default_category-Black Anodized Aluminum": "黑色阳极氧化铝", + "key-default_category-Carbon-Fiber": "碳纤维", "key-default_category-Cardstock": "卡纸", "key-default_category-Coated Paper": "铜版纸", + "key-default_category-Copper-H62": "铜H62", "key-default_category-Corrugated Paper": "瓦楞纸", "key-default_category-Crazy Horse Leather": "疯马皮", "key-default_category-Custom": "自定义", @@ -2196,19 +2218,23 @@ "key-default_category-PC": "PC", "key-default_category-PETG": "PETG", "key-default_category-PLA": "PLA", + "key-default_category-POM": "POM", "key-default_category-PVA": "PVA", "key-default_category-Pinewood": "松木", "key-default_category-Support": "Support", "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "植鞣革", + "key-default_category-Walnut": "胡桃木", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "黑色-ABS", "key-default_name-ABS_White": "白色-ABS", "key-default_name-ASA": "黑色-ASA", "key-default_name-Ball End Mill": "球头铣刀", + "key-default_name-Ball End Mill 2": "球头铣刀 2 毫米", "key-default_name-Breakaway Support-White": "白色-Breakaway Support", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "三棱雕刻刀", + "key-default_name-Carving V-bit 4": "平底尖刀", "key-default_name-Cutting 1.5mm": "切割 1.5 毫米", "key-default_name-Cutting 1.6mm": "切割 1.6 毫米", "key-default_name-Cutting 10mm": "切割 10 毫米", @@ -2221,21 +2247,25 @@ "key-default_name-Cutting 5mm": "切割 5 毫米", "key-default_name-Cutting 6mm": "切割 6 毫米", "key-default_name-Cutting 8mm": "切割 8 毫米", + "key-default_name-Dot filled": "标准点填充", "key-default_name-Dot-filled Engraving": "点填充雕刻", "key-default_name-Fast Print": "快速打印", "key-default_name-Fast-Line-filled Engraving": "快速线填充", "key-default_name-Flat End Mill 1.5": "平头铣刀 1.5 毫米", "key-default_name-Flat End Mill 3.175": "平头铣刀 3.175 毫米", - "key-default_name-HD Fill": "HD Fill", + "key-default_name-Flat End Mill 4": "平底铣刀 4 毫米", + "key-default_name-HD Fill": "HD 填充", "key-default_name-High Quality": "高品质", + "key-default_name-Line filled": "标准线填充", "key-default_name-Line-filled Engraving": "线填充雕刻", "key-default_name-Normal Print": "正常打印", - "key-default_name-Normal Print (Others)": "Normal Print (Others)", - "key-default_name-Normal Print (PLA/ABS/PETG)": "Normal Print (PLA/ABS/PETG)", - "key-default_name-Normal Print (TPU)": "Normal Print (TPU)", + "key-default_name-Normal Print (Others)": "正常打印 (其他)", + "key-default_name-Normal Print (PLA/ABS/PETG)": "正常打印 (PLA/ABS/PETG)", + "key-default_name-Normal Print (TPU)": "正常打印 (TPU)", "key-default_name-Normal Quality": "普通品质", "key-default_name-Nylon-CoPA": "Nylon-CoPA", "key-default_name-Nylon-PA6-CF": "Nylon-PA6-CF", + "key-default_name-On the path": "标准沿着路径", "key-default_name-Other": "白色-Other", "key-default_name-PC": "黑色-PC", "key-default_name-PETG": "PETG", @@ -2248,20 +2278,23 @@ "key-default_name-PLA_Blue": "蓝色-PLA", "key-default_name-PLA_Glow": "夜光-PLA", "key-default_name-PLA_Grey": "灰色-PLA", - "key-default_name-PLA_Orange": "PLA-Orange", + "key-default_name-PLA_Orange": "橙色-PLA", "key-default_name-PLA_Red": "红色-PLA", "key-default_name-PLA_White": "白色-PLA", "key-default_name-PLA_Wood": "木质-PLA", "key-default_name-PLA_Yellow": "黄色-PLA", "key-default_name-PVA_White": "白色-PVA", - "key-default_name-Path Engrave": "Path Engrave", + "key-default_name-Path Engrave": "路径雕刻", "key-default_name-Precise & Strong": "精密坚固", - "key-default_name-SD Fill": "SD Fill", + "key-default_name-SD Fill": "SD 填充", "key-default_name-Smooth Surface": "表面光滑", "key-default_name-Straight Groove V-bit": "直槽尖刀", "key-default_name-TPU_Black": "黑色-TPU", "key-default_name-TPU_Yellow": "黄色-TPU", "key-default_name-Vector Engraving": "矢量雕刻", + "key-default_name-Vector dot filled": "矢量点填充", + "key-default_name-Vector line filled": "矢量线填充", + "key-default_name-Vector on the path": "矢量沿着路径", "key-machineMaterialSettings/Profile-update": "编辑参数", "key-machine_selection-10W Laser": "10W 激光", "key-machine_selection-3D Printing": "3D 打印", @@ -2351,7 +2384,7 @@ "key-unused-Passwords should be equal.": "密码应相同。", "key-unused-Records: {{from}} - {{to}} / {{total}}": "记录：{{from}} - {{to}} / {{total}}", "key-unused-Records: {{total}}": "记录：{{total}}", - "key-unused-Right Z Offset": "key-unused-Right Z Offset", + "key-unused-Right Z Offset": "Z 轴右偏移", "key-unused-Save": "保存", "key-unused-Save Changes": "保存更改", "key-unused-Spindle": "主轴", @@ -2375,5 +2408,6 @@ "key_menu_Quit": "退出", "key_menu_Services": "服务", "key_menu_Unhide": "取消隐藏", - "key_ui/widgets/CNCPath/CNCPath_Transformation": "变换" + "key_ui/widgets/CNCPath/CNCPath_Transformation": "变换", + "manualModeDesc": "manualModeDesc" } From 6cd01d7b1e48439221822444d1f8fcc85d6427a0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 19 Jun 2024 19:23:36 +0800 Subject: [PATCH 33/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 76 ++++++++++++------------- 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 25fa91fe01..a9f8326152 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1,7 +1,7 @@ { "0 Gap": "Без зазорів", "20W Laser Module": "Лазер 20W", - "2W Laser Module": "2W Laser Module", + "2W Laser Module": "Лазер 2W", "3D Printer": "3D друк", "40W Laser Module": "Лазер 40W", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "Значення 0-4095 регулює чутливість датчика, при менших значеннях забезпечується менша чутливість. Значення 4096 вимикає датчик.", @@ -159,7 +159,7 @@ "Elliptic": "Еліптичний", "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Аварійна зупинка. Будь ласка, переконайтеся, що немає небезпеки, і перезапустіть пристрій після того, як відпустили кнопку аварійної зупинки.", "Emergency stop button triggered": "Натиснуто кнопку аварійної зупинки", - "Enable 3D Print Head Setting": "Enable 3D Print Head Setting", + "Enable 3D Print Head Setting": "Увімкнути налаштування головки для 3D друку", "Enable Acceleration Control": "Керування прискоренням", "Enable Bridge Settings": "Налаштування містків", "Enable Coasting": "Облицювання", @@ -375,7 +375,7 @@ "Keep the device attended while it is in use!": "Слідкуйте за пристроєм, поки він перебуває в роботі!", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "Обʼєкт перевищив робочий розмір. Масштабувати його до максимального робочого розміру?", "Key-Laser/ImportScale-Scale To Fit": "Масштабувати до робочого розміру", - "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "Після друку за допомогою 2W екструдера червоного світла, підключеного через послідовний порт, робоча точка відліку може бути зміненою (X зсув {{ xOffset }}, Y зсув {{ yOffset }}). Будь ласка, майте на увазі цю проблему під час виконання повторного гравіювання.", "Key-Workspace/LaserStartJob-manual_mode_description": "Встановіть початок відліку у <1>Керуванні. Точка відліку має бути у місці, де промінь лазера може сфокусуватись до маленької точки. Натисніть <3>Розпочати і лазерна головка переміститься до точки відліку, після чого розпочнеться процес гравіювання чи вирізання за допомогою лазерного променя. Якщо ви не перевстановили точку початку відліку, буде використовуватись точка задана під час останнього виконання роботи.", "Knot": "Вузол", "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Перегрів Лазерного Випромінювача. Вимкніть пристрій і зачекайте деякий час, потім перезапустіть пристрій. Якщо це відбувається доволі часто, зверніться до Підтримки по допомогу.", @@ -496,7 +496,7 @@ "Monotonic Top Surface Order": "Монотонний порядок прасування поверхні", "Monotonic Top/Bottom Order": "Монотонний порядок прасування верха/низу", "More Settings": "Більше налаштувань", - "Motor Power Hold": "Motor Power Hold", + "Motor Power Hold": "Утримання живлення двигуна", "Movement Mode": "Режим пересування", "Network": "Мережа", "New Features": "Нові можливості", @@ -654,7 +654,7 @@ "Right": "Праве", "Right Extruder": "Правий екструдер", "Run Boundary": "Перевірити межі", - "Save": "Save", + "Save": "Зберегти", "Scale Fan Speed To 0-1": "Коефіцієнт швидкости обдуву 0-1", "Scaling Factor Shrinkage Compensation": "Коефіцієнт компенсації усадки", "Scan Offset": "Зміщення сканування", @@ -835,10 +835,10 @@ "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Камера досі не відкалібрована. Виконайте калібрацію камери скориставшись панеллю керування на пристрої.", "There are two types of origin mode.": "Є два типи режимів налаштування точки відліку.", "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "Існує два типи режимів зміщення точки відліку: режим перехрестя та режим світлової точки. У більшості випадків ми рекомендуємо використовувати режим перехрестя, це безпечніше та простіше у використанні. Режим світлової точки рекомендується лише тоді, коли потрібна повна потужність лазера.", - "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.", - "This mode requires homing to update the current machine coordinates. Would you like to continue?": "This mode requires homing to update the current machine coordinates. Would you like to continue?", + "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "Існує дві версії модуля 3D-друку з подвійною екструзією: одна для Artisan та одна для Snapmaker 2.0. Якщо ви використовуєте версію модуля 3D-друку Dual Extrusion для Snapmaker 2.0, обовʼязково активуйте цю опцію в Модулі 3D друку і збережіть зміни.", + "This mode requires homing to update the current machine coordinates. Would you like to continue?": "Цей режим вимагає пересування робочої головки в домашнє положення для оновлення поточних координат пристрою. Бажаєте продовжити?", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Ця точка (X0, Y0) є точкою відліку вашого проєкту. Початок системи координат, який потрібно встановити на пристрої, має збігатися з цією точкою.", - "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.", + "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "Щоб отримати доступ до функції режиму управління, будь ласка, спробуйте оновити прошивку до версії V1.6.8 або вище.", "Tool Limiting": "Обмеження інструментів", "Tool Type": "Тип інструментів", "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Робочу Голівку Відʼєднано. Вимкніть пристрій, підʼєднайте робочу голівку наново, та перезапустіть пристрій. Якщо проблема лишилась, зверніться до Підтримки по допомогу.", @@ -896,7 +896,7 @@ "Use Tab": "Використовувати перемички", "Use Towers": "Використовувати вежі", "Use tabs to hold the pieces in place.": "Використовувати перемички для утримання частин на місці.", - "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Use the control panel to position points A and B on the machine. Please do not move the print head manually.", + "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Використовуйте панель керування для позиціювання точок А і В на пристрої. Будь ласка, не переміщуйте головку друку вручну.", "User Specified": "Визначається користувачем", "V-bit": "V-подібний кінцевик", "Variable Line": "Змінна лінія", @@ -943,8 +943,8 @@ "Wall Transitioning Filter Margin": "Поле фільтру довжини переходу стінок", "Wall Transitioning Threshold Angle": "Пороговий кут переходу стінок", "Walls": "Стінки", - "Warm reminder": "Warm reminder", - "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.", + "Warm reminder": "Попередження", + "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "При використанні режиму зміщення роботи Laser Spot функція Позиціювання A-B наразі не підтримується.", "Wi-Fi Name": "Назва Wi-Fi", "Wipe Brush X Position": "Положення X щітки очищення", "Wipe Hop Speed": "Швидкість підйому очищення", @@ -1076,7 +1076,7 @@ "key-App/Settings/General-Workspace Setting": "Налаштування Верстата", "key-App/Settings/MachineSettings-10W Laser": "Лазер 10W", "key-App/Settings/MachineSettings-1600mW Laser": "Лазер 1600mW", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Dual Extrusion Module", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Подвійний екструдер", "key-App/Settings/MachineSettings-200mW Laser": "Лазер 200mW", "key-App/Settings/MachineSettings-3D Print Toolhead": "Модуль 3D друку", "key-App/Settings/MachineSettings-3D Printing": "3D друк", @@ -1091,8 +1091,8 @@ "key-App/Settings/MachineSettings-Machine": "Пристрій", "key-App/Settings/MachineSettings-Modules": "Модулі", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Одинарний екструдер", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Bracing Kit", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Quick Swap Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Набір для кріплення", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Набір для швидкої заміни", "key-App/Settings/MachineSettings-Standard CNC": "Стандартний", "key-App/Settings/Model Examination": "Перевірка моделі", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Під час імпорту сповіщати про моделі з вадами", @@ -1271,7 +1271,7 @@ "key-CncLaser/JobSetup-Use Locking block": "Блокування положення", "key-CncLaser/JobSetup-Width (X)": "Ширина (X)", "key-CncLaser/JobSetup-Work Origin": "Точка відліку", - "key-CncLaser/MainToolBar-A-B Position": "A-B Position", + "key-CncLaser/MainToolBar-A-B Position": "Позиціювання A-B", "key-CncLaser/MainToolBar-Add Background": "Додати фон", "key-CncLaser/MainToolBar-Bottom": "Вниз", "key-CncLaser/MainToolBar-Camera Capture": "Захоплення камерою", @@ -1456,9 +1456,9 @@ "key-Laser/CameraCaptureOriginal-Side Length": "Довжина сторони", "key-Laser/CameraCaptureOriginal-Upload": "Надіслати", "key-Laser/CameraCaptureOriginal_laser_module_not_connect_notice": "Пристрій не підʼєднано до Luban. Спробуйте скористуватись кабелем USB та підʼєднатись за допомогою <1>Послідовного порту.", - "key-Laser/Control/ABPositionButton-Clear AB": "Clear AB", - "key-Laser/Control/ABPositionButton-Set A position": "Set A position", - "key-Laser/Control/ABPositionButton-Set B position": "Set B position", + "key-Laser/Control/ABPositionButton-Clear AB": "Очистити A-B", + "key-Laser/Control/ABPositionButton-Set A position": "Встановити позицію A", + "key-Laser/Control/ABPositionButton-Set B position": "Встановити позицію B", "key-Laser/Edit/ContextMenu-Arrange": "Впорядкувати", "key-Laser/Edit/ContextMenu-Bring to Front": "На передній план", "key-Laser/Edit/ContextMenu-Close": "Закрити", @@ -2001,7 +2001,7 @@ "key-Workspace/Control/JogDistance-Decrease custom distance by one unit": "Зменшити відстань на один крок", "key-Workspace/Control/JogDistance-Increase custom angle by one unit": "Зменшити кут на один крок", "key-Workspace/Control/JogDistance-Increase custom distance by one unit": "Збільшити відстань на один крок", - "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "Відстань пересування по осях XY", + "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "Зсуву по XY", "key-Workspace/Control/JogDistance-XYZ Axis Travel Distance": "Відстань пересування по осях XYZ", "key-Workspace/Control/KeypadOverlay-0.1x Move": "Рух 0.1x", "key-Workspace/Control/KeypadOverlay-10x Move": "Рух 10x", @@ -2022,7 +2022,7 @@ "key-Workspace/Enclosure-Door Detection": "Відкриття дверцят", "key-Workspace/Enclosure-Enclosure": "Захисний бокс", "key-Workspace/Enclosure-Exhaust Fan": "Витяжний вентилятор", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Якщо ви вимкнете сенсор відкриття дверцят, ваша робота не буде зупинятись, коли одна з панелей захисного боксу буде відкритою.", "key-Workspace/Enclosure-LED Strips": "LED підсвітка", "key-Workspace/Fine-tuneWorkOrigin-Close": "Закрити", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Визначає швидкість руху робочої головки пристрою, під час роботи.", @@ -2063,7 +2063,7 @@ "key-Workspace/Input password": "Введіть пароль", "key-Workspace/Laser-high_power_tips": "Після ввімкнення потужність лазера буде встановлена на мінімум.", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "В автоматичному режимі буде здійсненно вимірювання товщини матеріалу для виконання автофокусування та старту роботи. <1>В Ручному режимі автофокусування буде зроблено відповідно до введеної товщини матеріалу та розпочато роботу. <3>Інформація про безпеку: перед використанням переконайтеся, що пристрій обладнано захисним боксом, а оператор та інші вдягли захисні окуляри, що захищають від випромінення лазера.", - "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Set Work Origin in <1>Control. Adjust the focus lever to touch the material. When the line above the knob aligns with Scale 0 or Focus, the laser beam (invisible for infrared laser) will focus right on the surface of the material. Click <3>Start, and the toolhead will move to the Work Origin to start laser engraving and cutting. If you do not reset Work Origin, the machine will use the same origin as the last job.", + "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Встановити Точку відліку роботи в панелі <1>Керування. Відрегулюйте важіль фокусування, щоб торкнутися матеріалу. Коли лінія над ручкою вирівнюється зі шкалою 0 або фокусом, лазерний промінь (невидимий у випадку інфрачервоного лазера) буде фокусуватися прямо на поверхні матеріалу. Натисніть <3>Пуск, і головка інструменту переміститься до Точки відліку, щоб розпочати лазерне гравіювання та різання. Якщо ви не скинете Точку відліку, пристрій використовуватиме ту саму точку, що була встановлена в останньому завданні.", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "Товщина матеріалу", "key-Workspace/LaserStartJob-3axis_start_job_prompt": "В автоматичному режимі автофокусування буде зроблено відповідно до введеної товщини матеріалу та розпочато роботу. <1>В Ручному режимі буде використана поточна робоча точка відліку для початку роботи. Переконайтесь, що ви встановили точку початку відліку перед тим як розпочати. <3>Інформація про безпеку: перед використанням переконайтеся, що пристрій обладнано захисним боксом, а оператор та інші вдягли захисні окуляри, що захищають від випромінення лазера.", "key-Workspace/LaserStartJob-4axis_start_job_prompt": "Для початку роботи буде використана поточна точка відліку. Переконайтесь, що ви встановили точку початку відліку перед тим як розпочати. <3>Інформація про безпеку: перед використанням переконайтеся, що пристрій обладнано захисним боксом, а оператор та інші вдягли захисні окуляри, що захищають від випромінення лазера.", @@ -2189,17 +2189,17 @@ "key-default_category-ABS": "ABS", "key-default_category-ASA": "ASA", "key-default_category-Acrylic": "Акрил", - "key-default_category-Aluminium-1060": "Aluminium-1060", - "key-default_category-Aluminium-5052": "Aluminium-5052", - "key-default_category-Aluminium-6061": "Aluminium-6061", + "key-default_category-Aluminium-1060": "Алюміній-1060", + "key-default_category-Aluminium-5052": "Алюміній-5052", + "key-default_category-Aluminium-6061": "Алюміній-6061", "key-default_category-Basswood": "Фанера з липи", - "key-default_category-Beech": "Beech", + "key-default_category-Beech": "Бук", "key-default_category-Black Acrylic": "Чорний акрил", "key-default_category-Black Anodized Aluminum": "Чорний анодований алюміній", - "key-default_category-Carbon-Fiber": "Carbon-Fiber", + "key-default_category-Carbon-Fiber": "Вуглецеве волокно", "key-default_category-Cardstock": "Картон", "key-default_category-Coated Paper": "Ламінований папір", - "key-default_category-Copper-H62": "Copper-H62", + "key-default_category-Copper-H62": "Мідь-H62", "key-default_category-Corrugated Paper": "Гофрований папір", "key-default_category-Crazy Horse Leather": "Шкіра Crazy Horse", "key-default_category-Custom": "Інше", @@ -2224,17 +2224,17 @@ "key-default_category-Support": "Опори", "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Дублена шкіра", - "key-default_category-Walnut": "Walnut", + "key-default_category-Walnut": "Горіх", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ASA", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA", "key-default_name-Ball End Mill": "Кулькова фреза", - "key-default_name-Ball End Mill 2": "Ball End Mill 2mm", + "key-default_name-Ball End Mill 2": "Кулькова фреза 2мм", "key-default_name-Breakaway Support-White": "Breakaway Support White", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-подібна фреза для різьблення", - "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", + "key-default_name-Carving V-bit 4": "V-подібна фреза для різьблення 4мм", "key-default_name-Cutting 1.5mm": "Прорізання 1.5 мм", "key-default_name-Cutting 1.6mm": "Прорізання 1.6 мм", "key-default_name-Cutting 10mm": "Прорізання 10 мм", @@ -2247,16 +2247,16 @@ "key-default_name-Cutting 5mm": "Прорізання 5 мм", "key-default_name-Cutting 6mm": "Прорізання 6 мм", "key-default_name-Cutting 8mm": "Прорізання 8 мм", - "key-default_name-Dot filled": "Standard dot filled", + "key-default_name-Dot filled": "Стандартне точкове заповнення", "key-default_name-Dot-filled Engraving": "Точкове заповнення", "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", "key-default_name-Flat End Mill 1.5": "Пласка фреза 1.5", "key-default_name-Flat End Mill 3.175": "Пласка фреза 3.175", - "key-default_name-Flat End Mill 4": "Flat End Mill 4", + "key-default_name-Flat End Mill 4": "Пласка фреза 4", "key-default_name-HD Fill": "HD заповнення", "key-default_name-High Quality": "Висока якість", - "key-default_name-Line filled": "Standard line filled", + "key-default_name-Line filled": "Стандартне лінійне заповнення", "key-default_name-Line-filled Engraving": "Лінійне заповнення", "key-default_name-Normal Print": "Звичайний друк", "key-default_name-Normal Print (Others)": "Звичайний друк (інше)", @@ -2265,7 +2265,7 @@ "key-default_name-Normal Quality": "Звичайна якість", "key-default_name-Nylon-CoPA": "Нейлон-CoPA", "key-default_name-Nylon-PA6-CF": "Нейлон-PA6-CF", - "key-default_name-On the path": "Standard on the path", + "key-default_name-On the path": "Стандартно вздовж лінії", "key-default_name-Other": "Інше", "key-default_name-PC": "PC", "key-default_name-PETG": "PETG", @@ -2292,9 +2292,9 @@ "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU-Yellow", "key-default_name-Vector Engraving": "Векторне гравіювання", - "key-default_name-Vector dot filled": "Vector dot filled", - "key-default_name-Vector line filled": "Vector line filled", - "key-default_name-Vector on the path": "Vector on the path", + "key-default_name-Vector dot filled": "Вектор, точкове заповнення", + "key-default_name-Vector line filled": "Вектор, лінійне заповнення", + "key-default_name-Vector on the path": "Вектор, вздовж лінії", "key-machineMaterialSettings/Profile-update": "Редагувати", "key-machine_selection-10W Laser": "Лазер 10W", "key-machine_selection-3D Printing": "3D друк", @@ -2409,5 +2409,5 @@ "key_menu_Services": "Служби", "key_menu_Unhide": "Показати", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація", - "manualModeDesc": "manualModeDesc" + "manualModeDesc": "Опис ручного режиму" } From 27b97e74329e0e31232dc03747cc7d466713b2f8 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sun, 23 Jun 2024 01:27:00 +0800 Subject: [PATCH 34/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index ed1edd3ae0..8ddede1274 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -1,7 +1,7 @@ { "0 Gap": "0 Lücken", "20W Laser Module": "20W Laser Modul", - "2W Laser Module": "2W Laser Module", + "2W Laser Module": "2W Laser-Modul", "3D Printer": "3D-Drucker", "40W Laser Module": "40W Laser Modul", "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "Ein Wert von 0-4095 regelt die Sensorempfindlichkeit, wobei niedrigere Werte eine geringere Empfindlichkeit angeben.\nEin Wert von 4096 schaltet die Erkennung aus.", @@ -159,7 +159,7 @@ "Elliptic": "Elliptisch", "Emergency Stop. Please make sure that there is no danger and restart the machine after releasing the emergency stop switch.": "Not-Halt. Bitte stellen Sie sicher, dass keine Gefahr besteht und starten Sie die Maschine nach dem Entriegeln des Not-Halt-Schalters neu.", "Emergency stop button triggered": "Not-Halt-Schalter betätigt", - "Enable 3D Print Head Setting": "Enable 3D Print Head Setting", + "Enable 3D Print Head Setting": "3D-Druckkopf-Einstellung aktivieren", "Enable Acceleration Control": "Beschleunigungssteuerung aktivieren", "Enable Bridge Settings": "Brückeneinstellungen aktivieren", "Enable Coasting": "Coasting aktivieren", @@ -654,7 +654,7 @@ "Right": "Rechts", "Right Extruder": "Rechter Extruder", "Run Boundary": "Ausführungsgrenze", - "Save": "Save", + "Save": "Speichern", "Scale Fan Speed To 0-1": "Scale Fan Speed To 0-1", "Scaling Factor Shrinkage Compensation": "Scaling Factor Shrinkage Compensation", "Scan Offset": "Scan-Versatz", From 48ee09ce5c6e45aa0e615381617b63f3d55f6d14 Mon Sep 17 00:00:00 2001 From: parachvte Date: Mon, 24 Jun 2024 01:22:02 +0800 Subject: [PATCH 35/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 64 ++++++++++++------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 8ddede1274..5704c19e5d 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -375,7 +375,7 @@ "Keep the device attended while it is in use!": "Halten Sie das Gerät unter Beobachtung, während es in Gebrauch ist!", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "Das Objekt hat die Arbeitsgröße überschritten. Auf die maximale Arbeitsgröße skalieren?", "Key-Laser/ImportScale-Scale To Fit": "Skalieren zum Anpassen", - "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "Nach dem Drucken mit dem 2W Rotlicht-Extruder über die serielle Schnittstelle kann der Work Origin geändert worden sein (X Offset {{ xOffset }}, Y Offset {{ yOffset }}). Bitte beachten Sie diesen Umstand, wenn Sie wiederholt Gravierungen ausführen.", "Key-Workspace/LaserStartJob-manual_mode_description": "Key-Workspace/LaserStartJob-Manual_Modus_Beschreibung", "Knot": "Knoten", "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "Laser-Emitter-Überhitzung. Bitte schalten Sie die Maschine aus, warten Sie eine Weile und starten Sie den Vorgang neu. Wenn dies öfter auftritt, wenden Sie sich an unseren Support für Hilfe.", @@ -548,11 +548,11 @@ "Outer Wall Wipe Distance": "Äußere Wandwischdistanz", "Outline": "Umriss", "Outside To Inside": "Außen nach innen", - "Over Scanning": "Over Scanning", + "Over Scanning": "Overscan", "Overhanging Wall Angle": "Überhängender Wandwinkel", "Overhanging Wall Speed": "Überhängende Wandgeschwindigkeit", - "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreitung des Limits. X-Achsen-Grenzschalter ausgelöst. Bewegungsbereich überschreitet die Maschinengrenzen. Wenn es während der Bearbeitung auftritt, stellen Sie die Home-Position der Maschine ein oder kontrollieren Sie, dass der Gcode korrekt ist.", - "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreitung des Limits. Y-Achsen-Grenzschalter ausgelöst. Bewegungsbereich überschreitet die Maschinengrenzen. Wenn es während der Bearbeitung auftritt, stellen Sie die Home-Position der Maschine ein oder kontrollieren Sie, dass der Gcode korrekt ist.", + "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreitung des Limits. X-Achsen-Grenzschalter ausgelöst. Bewegungsbereich überschreitet die Maschinengrenzen. Wenn es während der Bearbeitung auftritt, stellen Sie die Home-Position der Maschine ein oder kontrollieren Sie, dass der G-Code korrekt ist.", + "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreiten der Grenze. Endschalter der Y-Achse ausgelöst. Der Bewegungsbereich überschreitet die Grenzen der Maschine. Wenn dies während der Bearbeitung auftritt, passen Sie den Startpunkt der Maschine an oder überprüfen Sie, ob der G-Code korrekt ist.", "PC": "PC", "PETG": "PETG", "PLA": "PLA", @@ -835,10 +835,10 @@ "The camera hasn't been calibrated yet. Please go through the Camera Calibration procedures on touchscreen first.": "Die Kamera wurde noch nicht kalibriert. Bitte führen Sie zuerst die Kamerakalibrierung auf dem Touchscreen durch.", "There are two types of origin mode.": "Es gibt zwei Typen des Ursprungs-Modus.", "There are two types of origin offset modes: crosshair mode and laser spot mode. In most cases we recommend using the crosshair mode, it is safer and easier to use. The laser spot mode is only recommended when full-stroke machining is required.": "Es gibt zwei Ursprungsversatz-Modi: Fadenkreuz- und Laserpunkt-Modus. Für die meisten Fälle empfehlen wir den Fadenkreuz-Modus, er ist sicherer und einfacher zu bedienen. Der Laserpunkt-Modus wird nur empfohlen, wenn eine vollflächige Bearbeitung erforderlich ist.", - "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.", - "This mode requires homing to update the current machine coordinates. Would you like to continue?": "This mode requires homing to update the current machine coordinates. Would you like to continue?", + "There are two versions of the Dual Extrusion 3D Printing Module: one for Artisan and one for Snapmaker 2.0. If you are using the Snapmaker 2.0 version of the Dual Extrusion 3D Printing Module, be sure to activate the 3D Print Head option and save your changes.": "Es gibt zwei Versionen des Dual Extrusion 3D-Druckmoduls: eine für Artisan und eine für Snapmaker 2.0. Falls Sie das Dual Extrusion 3D-Druckmodul für den Snapmaker 2.0 verwenden, aktivieren Sie die 3D-Druckkopf-Einstellung und speichern Sie Ihre Änderung.", + "This mode requires homing to update the current machine coordinates. Would you like to continue?": "In diesem Modus müssen die aktuellen Maschinenkoordinaten aktualisiert werden und in die Grundstellung gefahren werden. Möchten Sie fortfahren?", "This point (X0, Y0) is the origin of the design coordinate system, and the origin to be positioned or set on the machine needs to coincide with this point.": "Dieser Punkt (X0, Y0) ist der Ursprung des Design-Koordinatensystems und der Ursprung, der auf der Maschine positioniert oder gesetzt werden soll, muss mit diesem Punkt übereinstimmen.", - "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.", + "To access the control mode feature, please consider updating your firmware to version V1.6.8 or higher.": "Um auf die Kontrollmodus-Funktion zuzugreifen, sollten Sie Ihre Firmware auf Version V1.6.8 oder höher aktualisieren.", "Tool Limiting": "Werkzeug-Limitierung", "Tool Type": "Werkzeug-Typ", "Toolhead Disconnected. Please power off the machine, replug the toolhead, and restart. If the problem persists, contact our Support for help.": "Das Werkzeug-Modul wurde nicht erkannt. Bitte schalte die Maschine aus, überprüfe die Verbindung des Werkzeug-Moduls über das Verbindungskabel zum Controller und starte dann die Maschine erneut. Wenn das Problem weiterhin besteht, kontaktiere unseren Support für Hilfe.", @@ -896,7 +896,7 @@ "Use Tab": "Reiter verwenden", "Use Towers": "Verwendung von Pfeilern", "Use tabs to hold the pieces in place.": "Verwenden Sie Reiter, um die Teile zu fixieren.", - "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Use the control panel to position points A and B on the machine. Please do not move the print head manually.", + "Use the control panel to position points A and B on the machine. Please do not move the print head manually.": "Verwenden Sie das Bedienfeld, um die Punkte A und B auf der Maschine festzulegen. Bitte bewegen Sie den Druckkopf nicht manuell.", "User Specified": "Benutzerdefiniert", "V-bit": "V-shaped Tip", "Variable Line": "Variable Linie", @@ -943,8 +943,8 @@ "Wall Transitioning Filter Margin": "Wandübergangsfilter Rand", "Wall Transitioning Threshold Angle": "Schwellenwinkel für Wandübergang", "Walls": "Wände", - "Warm reminder": "Warm reminder", - "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.", + "Warm reminder": "Kleine Erinnerung", + "When using the Laser Spot Job Offset Mode, the AB Position feature is currently not supported.": "Bei Verwendung des \"Laser Spot Job Offset\" Modus wird die AB Positions-Funktion derzeit nicht unterstützt.", "Wi-Fi Name": "WLAN-Name", "Wipe Brush X Position": "Wipe Brush X Position", "Wipe Hop Speed": "Wipe Hop Speed", @@ -1076,7 +1076,7 @@ "key-App/Settings/General-Workspace Setting": "Arbeitsumgebungs-Einstellungen", "key-App/Settings/MachineSettings-10W Laser": "10W-Laser", "key-App/Settings/MachineSettings-1600mW Laser": "1600mW-Laser", - "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Dual Extrusion Module", + "key-App/Settings/MachineSettings-2.0 Dual Extrusion Module": "Snapmaker 2.0 Dual Extrusion Modul", "key-App/Settings/MachineSettings-200mW Laser": "200mW-Laser", "key-App/Settings/MachineSettings-3D Print Toolhead": "3D-Druckmodul", "key-App/Settings/MachineSettings-3D Printing": "3D-Druck", @@ -1091,8 +1091,8 @@ "key-App/Settings/MachineSettings-Machine": "Gerät", "key-App/Settings/MachineSettings-Modules": "Module", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Einzelner Extruder", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Bracing Kit", - "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Quick Swap Kit", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Bracing Kit": "Snapmaker 2.0 Befestigungssatz", + "key-App/Settings/MachineSettings-Snapmaker 2.0 Quick Swap Kit": "Snapmaker 2.0 Schnellwechsel-Kit", "key-App/Settings/MachineSettings-Standard CNC": "Norm", "key-App/Settings/Model Examination": "Modellprüfung", "key-App/Settings/Pop up a reminder when importing deficient model(s)": "Popup-Erinnerung beim Importieren eines fehlerhaften Modells", @@ -1457,7 +1457,7 @@ "key-Laser/CameraCaptureOriginal-Upload": "Hochladen", "key-Laser/CameraCaptureOriginal_laser_module_not_connect_notice": "Das Lasermodul ist nicht verbunden. Versuchen Sie, das USB-Kabel einzufügen, und stellen Sie dann eine Verbindung über die <1>Serieller Anschluss her.", "key-Laser/Control/ABPositionButton-Clear AB": "AB löschen", - "key-Laser/Control/ABPositionButton-Set A position": "Legen Sie eine Position fest", + "key-Laser/Control/ABPositionButton-Set A position": "A-Position setzen", "key-Laser/Control/ABPositionButton-Set B position": "B-Position setzen", "key-Laser/Edit/ContextMenu-Arrange": "Anordnen", "key-Laser/Edit/ContextMenu-Bring to Front": "Nach vorne bringen", @@ -2001,7 +2001,7 @@ "key-Workspace/Control/JogDistance-Decrease custom distance by one unit": "Verringern der benutzerdefinierten Entfernung um eine Einheit", "key-Workspace/Control/JogDistance-Increase custom angle by one unit": "Erhöhung des benutzerdefinierten Winkels um eine Einheit", "key-Workspace/Control/JogDistance-Increase custom distance by one unit": "Erhöhung der benutzerdefinierten Entfernung um eine Einheit", - "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "XY-Achsenversatz", + "key-Workspace/Control/JogDistance-XY Axis Travel Distance": "XY-Achsen-Versatz", "key-Workspace/Control/JogDistance-XYZ Axis Travel Distance": "XYZ-Achsenversatz", "key-Workspace/Control/KeypadOverlay-0.1x Move": "Bewegen 0,1x", "key-Workspace/Control/KeypadOverlay-10x Move": "Bewegen 10x", @@ -2022,7 +2022,7 @@ "key-Workspace/Enclosure-Door Detection": "Tür-Erkennung", "key-Workspace/Enclosure-Enclosure": "Gehäuse", "key-Workspace/Enclosure-Exhaust Fan": "Abluftventilator", - "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennungsfunktion deaktivieren, wird Ihr Auftrag nicht angehalten, wenn eine der beiden Schaltschrankblenden geöffnet wird.", + "key-Workspace/Enclosure-If you disable the Door Detection feature,\r\nyour job will not pause when one of both of the enclosure panels is/are opened.": "Wenn Sie die Türerkennungsfunktion deaktivieren, wird Ihr Auftrag nicht angehalten, wenn eine der beiden Türen geöffnet wird.", "key-Workspace/Enclosure-LED Strips": "LED-Streifen", "key-Workspace/Fine-tuneWorkOrigin-Close": "Schließen", "key-Workspace/Fine-tuneWorkOrigin-Determines how fast the machine moves when it’s working.": "Bestimmt, wie schnell sich das Gerät bewegt, wenn es sich in Betrieb befindet.", @@ -2063,7 +2063,7 @@ "key-Workspace/Input password": "Passwort eingeben", "key-Workspace/Laser-high_power_tips": "Die Laserleistung wird beim Einschalten des Lasers auf das Minimum eingestellt.", "key-Workspace/LaserStartJob-10w_3axis_start_job_prompt": "Im Auto-Modus führt das Gerät einen Autofokus entsprechend der von Ihnen eingegebenen Materialdicke aus und startet den Auftrag.<1>Im manuellen Modus verwendet das Gerät den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<3>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", - "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Set Work Origin in <1>Control. Adjust the focus lever to touch the material. When the line above the knob aligns with Scale 0 or Focus, the laser beam (invisible for infrared laser) will focus right on the surface of the material. Click <3>Start, and the toolhead will move to the Work Origin to start laser engraving and cutting. If you do not reset Work Origin, the machine will use the same origin as the last job.", + "key-Workspace/LaserStartJob-20w_40w_2w_manual_mode_description": "Work Origin unter <1>Kontrolle festlegen. Justieren Sie den Fokushebel so, dass er das Material berührt. Wenn die Linie über dem Knopf mit Skalierung \"0\" oder \"Fokus\" ausgerichtet ist, fokussiert sich der Laserstrahl (unsichtbar bei Infrarot-Laser) direkt auf der Oberfläche des Materials. Klicken Sie auf <3>Start und der Werkzeugkopf wird zum Work Origin gefahren, um Lasergravur und Schneiden zu starten. Wenn Sie den Work Origin nicht zurücksetzen, wird die Maschine den gleichen Ursprung wie beim letzten Auftrag verwenden.", "key-Workspace/LaserStartJob-3axis_start_job_material_thickness": "Materialdicke", "key-Workspace/LaserStartJob-3axis_start_job_prompt": "Im Auto-Modus führt das Gerät einen Autofokus entsprechend der von Ihnen eingegebenen Materialdicke aus und startet den Auftrag.<1>Im manuellen Modus verwendet das Gerät den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<3>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", "key-Workspace/LaserStartJob-4axis_start_job_prompt": "Das Gerät verwendet den aktuellen Arbeitsursprung, um den Auftrag zu starten. Vergewissern Sie sich, dass Sie den Arbeitsursprung eingestellt haben, bevor Sie beginnen.<1>Sicherheitsinformationen: Vergewissern Sie sich vor der Verwendung, dass das Gerät mit einem Gehäuse ausgestattet ist und dass sowohl der Bediener als auch umstehende Personen eine Laserschutzbrille tragen.", @@ -2193,13 +2193,13 @@ "key-default_category-Aluminium-5052": "Aluminium-5052", "key-default_category-Aluminium-6061": "Aluminium-6061", "key-default_category-Basswood": "Lindenholz", - "key-default_category-Beech": "Beech", + "key-default_category-Beech": "Buche", "key-default_category-Black Acrylic": "Schwarzes Acryl", "key-default_category-Black Anodized Aluminum": "Schwarz-eloxiertes Aluminium", - "key-default_category-Carbon-Fiber": "Carbon-Fiber", + "key-default_category-Carbon-Fiber": "Kohlefaser", "key-default_category-Cardstock": "Kartenmaterial", "key-default_category-Coated Paper": "Beschichtetes Papier", - "key-default_category-Copper-H62": "Copper-H62", + "key-default_category-Copper-H62": "Kupfer H62", "key-default_category-Corrugated Paper": "Wellpappe", "key-default_category-Crazy Horse Leather": "Crazy Horse-Leder", "key-default_category-Custom": "Benutzerdefiniert", @@ -2224,17 +2224,17 @@ "key-default_category-Support": "Support", "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Pflanzlich gegerbtes Leder", - "key-default_category-Walnut": "Walnut", + "key-default_category-Walnut": "Walnuss", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA-Black", "key-default_name-Ball End Mill": "Kugelfräser", - "key-default_name-Ball End Mill 2": "Ball End Mill 2mm", + "key-default_name-Ball End Mill 2": "Kugelfräser 2mm", "key-default_name-Breakaway Support-White": "Breakaway Support-Weiß", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-Bit schnitzen", - "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", + "key-default_name-Carving V-bit 4": "Carving V-Bit 4 mm", "key-default_name-Cutting 1.5mm": "Schneiden 1,5 mm", "key-default_name-Cutting 1.6mm": "Schneiden 1,6 mm", "key-default_name-Cutting 10mm": "Schneiden 10 mm", @@ -2247,16 +2247,16 @@ "key-default_name-Cutting 5mm": "Schneiden 5 mm", "key-default_name-Cutting 6mm": "6mm schneiden", "key-default_name-Cutting 8mm": "Schneiden 8 mm", - "key-default_name-Dot filled": "Standard dot filled", + "key-default_name-Dot filled": "Standard Punkt gefüllt", "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", - "key-default_name-Flat End Mill 4": "Flat End Mill 4", + "key-default_name-Flat End Mill 4": "Flachfräser 4", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", - "key-default_name-Line filled": "Standard line filled", + "key-default_name-Line filled": "Standard Linien gefüllt", "key-default_name-Line-filled Engraving": "Liniengefüllte Gravur", "key-default_name-Normal Print": "Normal", "key-default_name-Normal Print (Others)": "Normaler Druck (Andere)", @@ -2265,7 +2265,7 @@ "key-default_name-Normal Quality": "Normale Qualität", "key-default_name-Nylon-CoPA": "Nylon-CoPA", "key-default_name-Nylon-PA6-CF": "Nylon-PA6-CF", - "key-default_name-On the path": "Standard on the path", + "key-default_name-On the path": "Standard auf dem Pfad", "key-default_name-Other": "Anderes-Weiß", "key-default_name-PC": "PC-Black", "key-default_name-PETG": "PETG", @@ -2292,9 +2292,9 @@ "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU Gelb", "key-default_name-Vector Engraving": "Vektor-Gravur", - "key-default_name-Vector dot filled": "Vector dot filled", - "key-default_name-Vector line filled": "Vector line filled", - "key-default_name-Vector on the path": "Vector on the path", + "key-default_name-Vector dot filled": "Vektor Punkt gefüllt", + "key-default_name-Vector line filled": "Vektor Linien gefüllt", + "key-default_name-Vector on the path": "Vektor auf dem Pfad", "key-machineMaterialSettings/Profile-update": "Bearbeiten", "key-machine_selection-10W Laser": "10W-Laser", "key-machine_selection-3D Printing": "3D-Druck", @@ -2401,7 +2401,7 @@ "key-unused-{{pageLength}} per page": "{{pageLength}} pro Seite", "key-workspace_open_port-Can not open this port": "Dieser Port kann nicht geöffnet werden.", "key-workspace_open_port-The machine is not ready": "Das Gerät ist nicht bereit.", - "key_CNC_loading_warning": "Dies ist eine Alpha-Version, mit der Sie mit dem CNC-Schnitzen beginnen können. Stellen Sie sicher, dass Sie die Sicherheitsinformationen<1><2> gelesen haben<3>bevor Sie fortfahren.", + "key_CNC_loading_warning": "Dies ist eine Alpha-Version, mit der Sie mit dem CNC-Schnitzen beginnen können. Stellen Sie sicher, dass Sie die Sicherheitsinformationen<1><2> gelesen haben<3>, bevor Sie fortfahren.", "key_menu_About": "Über", "key_menu_Hide": "Ausblenden", "key_menu_Hide Others": "Andere ausblenden", @@ -2409,5 +2409,5 @@ "key_menu_Services": "Dienstleistungen", "key_menu_Unhide": "Einblenden", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Umwandlung", - "manualModeDesc": "manualModeDesc" + "manualModeDesc": "Oberfläche manueller Modus" } From 6962f36cf6b105bd2c1e9714e991bc2fd4aa42e8 Mon Sep 17 00:00:00 2001 From: parachvte Date: Mon, 8 Jul 2024 01:14:21 +0800 Subject: [PATCH 36/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 5704c19e5d..e2c1be7ec2 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -68,7 +68,7 @@ "Bridge Third Skin Speed": "Geschwindigkeit Brücke, dritte Außenhaut", "Bridge Wall Coasting": "Coasting Brückenwand", "Bridge Wall Flow": "Brückenwandfluss", - "Bridge Wall Speed": "Brückenwandgeschwindigkeit", + "Bridge Wall Speed": "Brückenwand Geschwindigkeit", "Brim": "Brim", "Brim Distance": "Brim Distanz", "Brim Inside Avoid Margin": "Brim innen Vermeidungsrand", @@ -350,7 +350,7 @@ "Inner Wall Jerk": "Ruckfunktion Innenwand", "Inner Wall Speed": "Innenwand Geschwindigkeit", "Inner Wall(s) Flow": "Innere Wand Fluss", - "Inner Wall(s) Line Width": "Innere Wandlinien Breite", + "Inner Wall(s) Line Width": "Innere Wand Linienbreite", "Inside To Outside": "Von innen nach außen", "Interlocking Beam Layer Count": "Strahlschichtanzahl", "Interlocking Beam Width": "Strahlbreite", @@ -543,14 +543,14 @@ "Outer Wall Flow": "Außenwand Fluss", "Outer Wall Inset": "Äußere Wandeinstellung", "Outer Wall Jerk": "Außenwand Ruck", - "Outer Wall Line Width": "Äusere Wand Linien breite", - "Outer Wall Speed": "Äußere wand Geschwindigkeit", - "Outer Wall Wipe Distance": "Äußere Wandwischdistanz", + "Outer Wall Line Width": "Äußere Wand Linienbreite", + "Outer Wall Speed": "Äußere Wand Geschwindigkeit", + "Outer Wall Wipe Distance": "Äußere Wand Wisch-Distanz", "Outline": "Umriss", "Outside To Inside": "Außen nach innen", "Over Scanning": "Overscan", "Overhanging Wall Angle": "Überhängender Wandwinkel", - "Overhanging Wall Speed": "Überhängende Wandgeschwindigkeit", + "Overhanging Wall Speed": "Überhängende Wand Geschwindigkeit", "Overstep the limit. X-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreitung des Limits. X-Achsen-Grenzschalter ausgelöst. Bewegungsbereich überschreitet die Maschinengrenzen. Wenn es während der Bearbeitung auftritt, stellen Sie die Home-Position der Maschine ein oder kontrollieren Sie, dass der G-Code korrekt ist.", "Overstep the limit. Y-axis limit switch triggered. Range of motion exceeds machine boundaries. If it occurs during machining, adjust the machine home position or confirm that the Gcode is correct.": "Überschreiten der Grenze. Endschalter der Y-Achse ausgelöst. Der Bewegungsbereich überschreitet die Grenzen der Maschine. Wenn dies während der Bearbeitung auftritt, passen Sie den Startpunkt der Maschine an oder überprüfen Sie, ob der G-Code korrekt ist.", "PC": "PC", From 073b150f352b33b797b6ce247d0e76b27bb3b8d3 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 30 Oct 2024 19:06:25 +0800 Subject: [PATCH 37/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index e2c1be7ec2..6dcf00c203 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2229,11 +2229,11 @@ "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA-Black", - "key-default_name-Ball End Mill": "Kugelfräser", - "key-default_name-Ball End Mill 2": "Kugelfräser 2mm", + "key-default_name-Ball End Mill": "Ball End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", "key-default_name-Breakaway Support-White": "Breakaway Support-Weiß", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "V-Bit schnitzen", + "key-default_name-Carving V-bit": "Carving V-bit 3.175mm Shank", "key-default_name-Carving V-bit 4": "Carving V-Bit 4 mm", "key-default_name-Cutting 1.5mm": "Schneiden 1,5 mm", "key-default_name-Cutting 1.6mm": "Schneiden 1,6 mm", @@ -2251,9 +2251,9 @@ "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", - "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", - "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", - "key-default_name-Flat End Mill 4": "Flachfräser 4", + "key-default_name-Flat End Mill 1.5": "1-flute Flat End Mill 1.5mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "1-flute Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", "key-default_name-Line filled": "Standard Linien gefüllt", From a8533574bde279c87e9562b78673c11d7cb50cff Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 30 Oct 2024 19:06:28 +0800 Subject: [PATCH 38/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index af02d4ee98..b4a6f6aa80 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -2229,11 +2229,11 @@ "key-default_name-ABS_Black": "ABS-Nero", "key-default_name-ABS_White": "ABS-Bianco", "key-default_name-ASA": "ABS-Nero", - "key-default_name-Ball End Mill": "Fresa a testa sferica", - "key-default_name-Ball End Mill 2": "Ball End Mill 2mm", + "key-default_name-Ball End Mill": "Ball End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", "key-default_name-Breakaway Support-White": "Breakaway Support-White", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "Intaglio a V", + "key-default_name-Carving V-bit": "Carving V-bit 3.175mm Shank", "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", "key-default_name-Cutting 1.5mm": "Taglio 1,5 mm", "key-default_name-Cutting 1.6mm": "Taglio 1,6 mm", @@ -2251,9 +2251,9 @@ "key-default_name-Dot-filled Engraving": "Incisione a punti", "key-default_name-Fast Print": "Stampa veloce", "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", - "key-default_name-Flat End Mill 1.5": "Fresa a testa piatta 1,5", - "key-default_name-Flat End Mill 3.175": "Fresa a testa piatta 3,175", - "key-default_name-Flat End Mill 4": "Flat End Mill 4", + "key-default_name-Flat End Mill 1.5": "1-flute Flat End Mill 1.5mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "1-flute Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Alta qualità", "key-default_name-Line filled": "Standard line filled", From ed88a9df4c9f38801166e821752a6a39d0e4acf7 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 30 Oct 2024 19:06:30 +0800 Subject: [PATCH 39/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index a9f8326152..4e959aa402 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2229,11 +2229,11 @@ "key-default_name-ABS_Black": "ASA", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA", - "key-default_name-Ball End Mill": "Кулькова фреза", - "key-default_name-Ball End Mill 2": "Кулькова фреза 2мм", + "key-default_name-Ball End Mill": "Ball End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", "key-default_name-Breakaway Support-White": "Breakaway Support White", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "V-подібна фреза для різьблення", + "key-default_name-Carving V-bit": "Carving V-bit 3.175mm Shank", "key-default_name-Carving V-bit 4": "V-подібна фреза для різьблення 4мм", "key-default_name-Cutting 1.5mm": "Прорізання 1.5 мм", "key-default_name-Cutting 1.6mm": "Прорізання 1.6 мм", @@ -2251,9 +2251,9 @@ "key-default_name-Dot-filled Engraving": "Точкове заповнення", "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", - "key-default_name-Flat End Mill 1.5": "Пласка фреза 1.5", - "key-default_name-Flat End Mill 3.175": "Пласка фреза 3.175", - "key-default_name-Flat End Mill 4": "Пласка фреза 4", + "key-default_name-Flat End Mill 1.5": "1-flute Flat End Mill 1.5mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "1-flute Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD заповнення", "key-default_name-High Quality": "Висока якість", "key-default_name-Line filled": "Стандартне лінійне заповнення", From 0d64a91a90e9d9c34d1ce36b1ad1c1cd60fb4e94 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 30 Oct 2024 19:06:32 +0800 Subject: [PATCH 40/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index 7f9d78a32d..abc49d1338 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -2229,12 +2229,12 @@ "key-default_name-ABS_Black": "黑色-ABS", "key-default_name-ABS_White": "白色-ABS", "key-default_name-ASA": "黑色-ASA", - "key-default_name-Ball End Mill": "球头铣刀", - "key-default_name-Ball End Mill 2": "球头铣刀 2 毫米", + "key-default_name-Ball End Mill": "球头铣刀 3.175mm 刃径 3.175mm 刀柄", + "key-default_name-Ball End Mill 2": "球头铣刀 2mm 刃径 4mm 刀柄", "key-default_name-Breakaway Support-White": "白色-Breakaway Support", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "三棱雕刻刀", - "key-default_name-Carving V-bit 4": "平底尖刀", + "key-default_name-Carving V-bit": "三棱雕刻刀 3.175mm 刀柄", + "key-default_name-Carving V-bit 4": "平底雕刻刀 4mm 刀柄", "key-default_name-Cutting 1.5mm": "切割 1.5 毫米", "key-default_name-Cutting 1.6mm": "切割 1.6 毫米", "key-default_name-Cutting 10mm": "切割 10 毫米", @@ -2251,9 +2251,9 @@ "key-default_name-Dot-filled Engraving": "点填充雕刻", "key-default_name-Fast Print": "快速打印", "key-default_name-Fast-Line-filled Engraving": "快速线填充", - "key-default_name-Flat End Mill 1.5": "平头铣刀 1.5 毫米", - "key-default_name-Flat End Mill 3.175": "平头铣刀 3.175 毫米", - "key-default_name-Flat End Mill 4": "平底铣刀 4 毫米", + "key-default_name-Flat End Mill 1.5": "单刃平头铣刀 1.5mm 刃径 3.175mm 刀柄", + "key-default_name-Flat End Mill 3.175": "单刃平头铣刀 3.175mm 刃径 3.175mm 刀柄", + "key-default_name-Flat End Mill 4": "三刃平头铣刀 4mm 刃径 4mm 刀柄", "key-default_name-HD Fill": "HD 填充", "key-default_name-High Quality": "高品质", "key-default_name-Line filled": "标准线填充", From c862343e0d14f7a288675469a74ba6cd3a3480f7 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 31 Oct 2024 19:12:11 +0800 Subject: [PATCH 41/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 4e959aa402..3054e111d5 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2229,11 +2229,11 @@ "key-default_name-ABS_Black": "ASA", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA", - "key-default_name-Ball End Mill": "Ball End Mill 3.175mm Cutting 3.175mm Shank", - "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", + "key-default_name-Ball End Mill": "Кулькова торцева фреза 3.175 мм, хвостовик 3.175 мм", + "key-default_name-Ball End Mill 2": "Кулькова торцева фреза 2 мм, хвостовик 4 мм", "key-default_name-Breakaway Support-White": "Breakaway Support White", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "Carving V-bit 3.175mm Shank", + "key-default_name-Carving V-bit": "V-подібна фреза, хвостовик 3.175 мм", "key-default_name-Carving V-bit 4": "V-подібна фреза для різьблення 4мм", "key-default_name-Cutting 1.5mm": "Прорізання 1.5 мм", "key-default_name-Cutting 1.6mm": "Прорізання 1.6 мм", @@ -2251,9 +2251,9 @@ "key-default_name-Dot-filled Engraving": "Точкове заповнення", "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", - "key-default_name-Flat End Mill 1.5": "1-flute Flat End Mill 1.5mm Cutting 3.175mm Shank", - "key-default_name-Flat End Mill 3.175": "1-flute Flat End Mill 3.175mm Cutting 3.175mm Shank", - "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", + "key-default_name-Flat End Mill 1.5": "Пласка торцева фреза 1.5 мм, 1 канавка, відрізна, хвостовик 3.175 мм", + "key-default_name-Flat End Mill 3.175": "Пласка торцева фреза 3.175 мм, 1 канавка, відрізна, хвостовик 3.175 мм", + "key-default_name-Flat End Mill 4": "Пласка торцева фреза 4 мм, 3 канавки, відрізна, хвостовик 4 мм", "key-default_name-HD Fill": "HD заповнення", "key-default_name-High Quality": "Висока якість", "key-default_name-Line filled": "Стандартне лінійне заповнення", From cb9c21e9207ba88f9d261d6b46503674a0955d1d Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 1 Nov 2024 19:12:04 +0800 Subject: [PATCH 42/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 6dcf00c203..5e52131807 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2229,11 +2229,11 @@ "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA-Black", - "key-default_name-Ball End Mill": "Ball End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Ball End Mill": "Kugelfräser", "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", "key-default_name-Breakaway Support-White": "Breakaway Support-Weiß", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "Carving V-bit 3.175mm Shank", + "key-default_name-Carving V-bit": "V-Bit schnitzen", "key-default_name-Carving V-bit 4": "Carving V-Bit 4 mm", "key-default_name-Cutting 1.5mm": "Schneiden 1,5 mm", "key-default_name-Cutting 1.6mm": "Schneiden 1,6 mm", @@ -2251,8 +2251,8 @@ "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", - "key-default_name-Flat End Mill 1.5": "1-flute Flat End Mill 1.5mm Cutting 3.175mm Shank", - "key-default_name-Flat End Mill 3.175": "1-flute Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", + "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", @@ -2409,5 +2409,16 @@ "key_menu_Services": "Dienstleistungen", "key_menu_Unhide": "Einblenden", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Umwandlung", - "manualModeDesc": "Oberfläche manueller Modus" + "manualModeDesc": "Oberfläche manueller Modus", + "key_ui-views-MaterialTestModal-FormComponent-title": "Materialtest", + "key_ui-views-MaterialTestModal-FormComponent-rows": "Reihen", + "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Reihenzahl", + "key_ui-views-MaterialTestModal-FormComponent-columns": "Spalten", + "key_ui-views-MaterialTestModal-FormComponent-columnCount": "Spaltenzahl", + "key_ui-views-MaterialTestModal-FormComponent-speed": "Geschwindigkeit", + "key_ui-views-MaterialTestModal-FormComponent-power": "Leistung", + "key_ui-views-MaterialTestModal-FormComponent-min": "Min.", + "key_ui-views-MaterialTestModal-FormComponent-max": "Max.", + "key_ui-views-MaterialTestModal-FormComponent-height": "Höhe", + "key_ui-views-MaterialTestModal-FormComponent-width": "Breite" } From 93535680e0a1a34f392001b89e5a53ba9b4d29d0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 1 Nov 2024 19:12:07 +0800 Subject: [PATCH 43/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index b4a6f6aa80..2e3c731988 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -2229,11 +2229,11 @@ "key-default_name-ABS_Black": "ABS-Nero", "key-default_name-ABS_White": "ABS-Bianco", "key-default_name-ASA": "ABS-Nero", - "key-default_name-Ball End Mill": "Ball End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Ball End Mill": "Fresa a testa sferica", "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", "key-default_name-Breakaway Support-White": "Breakaway Support-White", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "Carving V-bit 3.175mm Shank", + "key-default_name-Carving V-bit": "Intaglio a V", "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", "key-default_name-Cutting 1.5mm": "Taglio 1,5 mm", "key-default_name-Cutting 1.6mm": "Taglio 1,6 mm", @@ -2251,8 +2251,8 @@ "key-default_name-Dot-filled Engraving": "Incisione a punti", "key-default_name-Fast Print": "Stampa veloce", "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", - "key-default_name-Flat End Mill 1.5": "1-flute Flat End Mill 1.5mm Cutting 3.175mm Shank", - "key-default_name-Flat End Mill 3.175": "1-flute Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 1.5": "Fresa a testa piatta 1,5", + "key-default_name-Flat End Mill 3.175": "Fresa a testa piatta 3,175", "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Alta qualità", @@ -2409,5 +2409,16 @@ "key_menu_Services": "Servizi", "key_menu_Unhide": "Scopri", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Trasformazione", - "manualModeDesc": "manualModeDesc" + "manualModeDesc": "manualModeDesc", + "key_ui-views-MaterialTestModal-FormComponent-title": "Test del Materiale", + "key_ui-views-MaterialTestModal-FormComponent-rows": "Righe", + "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Conteggio Righe", + "key_ui-views-MaterialTestModal-FormComponent-columns": "Colonne", + "key_ui-views-MaterialTestModal-FormComponent-columnCount": "Conteggio Colonne", + "key_ui-views-MaterialTestModal-FormComponent-speed": "Velocità", + "key_ui-views-MaterialTestModal-FormComponent-power": "Potenza", + "key_ui-views-MaterialTestModal-FormComponent-min": "Min.", + "key_ui-views-MaterialTestModal-FormComponent-max": "Max.", + "key_ui-views-MaterialTestModal-FormComponent-height": "Altezza", + "key_ui-views-MaterialTestModal-FormComponent-width": "Larghezza" } From 76d564253c0dd8a91185b0f1565e69a247708109 Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 1 Nov 2024 19:12:09 +0800 Subject: [PATCH 44/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 3054e111d5..5d707f216d 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2409,5 +2409,16 @@ "key_menu_Services": "Служби", "key_menu_Unhide": "Показати", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація", - "manualModeDesc": "Опис ручного режиму" + "manualModeDesc": "Опис ручного режиму", + "key_ui-views-MaterialTestModal-FormComponent-title": "Матеріальний тест", + "key_ui-views-MaterialTestModal-FormComponent-rows": "Ряди", + "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Кількість рядів", + "key_ui-views-MaterialTestModal-FormComponent-columns": "Стовпці", + "key_ui-views-MaterialTestModal-FormComponent-columnCount": "Кількість стовпців", + "key_ui-views-MaterialTestModal-FormComponent-speed": "Швидкість", + "key_ui-views-MaterialTestModal-FormComponent-power": "Потужність", + "key_ui-views-MaterialTestModal-FormComponent-min": "Мін.", + "key_ui-views-MaterialTestModal-FormComponent-max": "Макс.", + "key_ui-views-MaterialTestModal-FormComponent-height": "Висота", + "key_ui-views-MaterialTestModal-FormComponent-width": "Ширина" } From a2d92c122f2e5337bc1728abff02ea1862b37521 Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 1 Nov 2024 19:12:11 +0800 Subject: [PATCH 45/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index abc49d1338..1477574e77 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -2409,5 +2409,16 @@ "key_menu_Services": "服务", "key_menu_Unhide": "取消隐藏", "key_ui/widgets/CNCPath/CNCPath_Transformation": "变换", - "manualModeDesc": "manualModeDesc" + "manualModeDesc": "manualModeDesc", + "key_ui-views-MaterialTestModal-FormComponent-title": "材料测试", + "key_ui-views-MaterialTestModal-FormComponent-rows": "行", + "key_ui-views-MaterialTestModal-FormComponent-rowCount": "行数", + "key_ui-views-MaterialTestModal-FormComponent-columns": "列", + "key_ui-views-MaterialTestModal-FormComponent-columnCount": "列数", + "key_ui-views-MaterialTestModal-FormComponent-speed": "速度", + "key_ui-views-MaterialTestModal-FormComponent-power": "功率", + "key_ui-views-MaterialTestModal-FormComponent-min": "最小值", + "key_ui-views-MaterialTestModal-FormComponent-max": "最大值", + "key_ui-views-MaterialTestModal-FormComponent-height": "高度", + "key_ui-views-MaterialTestModal-FormComponent-width": "宽度" } From 7afdddca9ef8c45160a17f6efb33d2ff9aba278f Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 15 Nov 2024 15:09:57 +0800 Subject: [PATCH 46/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 5e52131807..ff092e24ef 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2234,7 +2234,7 @@ "key-default_name-Breakaway Support-White": "Breakaway Support-Weiß", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-Bit schnitzen", - "key-default_name-Carving V-bit 4": "Carving V-Bit 4 mm", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", "key-default_name-Cutting 1.5mm": "Schneiden 1,5 mm", "key-default_name-Cutting 1.6mm": "Schneiden 1,6 mm", "key-default_name-Cutting 10mm": "Schneiden 10 mm", @@ -2252,7 +2252,7 @@ "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", - "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", + "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", From ca22d3b980799a16f7719eb4773974e2e66e01b8 Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 15 Nov 2024 15:09:59 +0800 Subject: [PATCH 47/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index 2e3c731988..44f7253547 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -2234,7 +2234,7 @@ "key-default_name-Breakaway Support-White": "Breakaway Support-White", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "Intaglio a V", - "key-default_name-Carving V-bit 4": "Carving V-bit 4mm", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", "key-default_name-Cutting 1.5mm": "Taglio 1,5 mm", "key-default_name-Cutting 1.6mm": "Taglio 1,6 mm", "key-default_name-Cutting 10mm": "Cutting 10mm", @@ -2252,7 +2252,7 @@ "key-default_name-Fast Print": "Stampa veloce", "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", "key-default_name-Flat End Mill 1.5": "Fresa a testa piatta 1,5", - "key-default_name-Flat End Mill 3.175": "Fresa a testa piatta 3,175", + "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Alta qualità", From 4d3266b7d96af835a4a3444c4590fe03d20685a0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 15 Nov 2024 15:10:01 +0800 Subject: [PATCH 48/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 5d707f216d..c30fb67cfa 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2234,7 +2234,7 @@ "key-default_name-Breakaway Support-White": "Breakaway Support White", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-подібна фреза, хвостовик 3.175 мм", - "key-default_name-Carving V-bit 4": "V-подібна фреза для різьблення 4мм", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", "key-default_name-Cutting 1.5mm": "Прорізання 1.5 мм", "key-default_name-Cutting 1.6mm": "Прорізання 1.6 мм", "key-default_name-Cutting 10mm": "Прорізання 10 мм", @@ -2252,7 +2252,7 @@ "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", "key-default_name-Flat End Mill 1.5": "Пласка торцева фреза 1.5 мм, 1 канавка, відрізна, хвостовик 3.175 мм", - "key-default_name-Flat End Mill 3.175": "Пласка торцева фреза 3.175 мм, 1 канавка, відрізна, хвостовик 3.175 мм", + "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", "key-default_name-Flat End Mill 4": "Пласка торцева фреза 4 мм, 3 канавки, відрізна, хвостовик 4 мм", "key-default_name-HD Fill": "HD заповнення", "key-default_name-High Quality": "Висока якість", From 70cac0f33cc41bef8d61ee8fb8c9bdeae5813c4a Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 15 Nov 2024 15:10:02 +0800 Subject: [PATCH 49/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index 1477574e77..b12e2b935e 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -2234,7 +2234,7 @@ "key-default_name-Breakaway Support-White": "白色-Breakaway Support", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "三棱雕刻刀 3.175mm 刀柄", - "key-default_name-Carving V-bit 4": "平底雕刻刀 4mm 刀柄", + "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", "key-default_name-Cutting 1.5mm": "切割 1.5 毫米", "key-default_name-Cutting 1.6mm": "切割 1.6 毫米", "key-default_name-Cutting 10mm": "切割 10 毫米", @@ -2252,7 +2252,7 @@ "key-default_name-Fast Print": "快速打印", "key-default_name-Fast-Line-filled Engraving": "快速线填充", "key-default_name-Flat End Mill 1.5": "单刃平头铣刀 1.5mm 刃径 3.175mm 刀柄", - "key-default_name-Flat End Mill 3.175": "单刃平头铣刀 3.175mm 刃径 3.175mm 刀柄", + "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", "key-default_name-Flat End Mill 4": "三刃平头铣刀 4mm 刃径 4mm 刀柄", "key-default_name-HD Fill": "HD 填充", "key-default_name-High Quality": "高品质", From 2ff7359a33fa7cbc7c38c6888de1ce8a63beb87f Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 16 Nov 2024 15:21:30 +0800 Subject: [PATCH 50/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index c30fb67cfa..0e5520b250 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2234,7 +2234,7 @@ "key-default_name-Breakaway Support-White": "Breakaway Support White", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "V-подібна фреза, хвостовик 3.175 мм", - "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", + "key-default_name-Carving V-bit 4": "V-подібна фреза, хвостовик 4 мм", "key-default_name-Cutting 1.5mm": "Прорізання 1.5 мм", "key-default_name-Cutting 1.6mm": "Прорізання 1.6 мм", "key-default_name-Cutting 10mm": "Прорізання 10 мм", @@ -2252,7 +2252,7 @@ "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", "key-default_name-Flat End Mill 1.5": "Пласка торцева фреза 1.5 мм, 1 канавка, відрізна, хвостовик 3.175 мм", - "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "Пласка торцева фреза 3.175 мм, відрізна, хвостовик 3.175 мм", "key-default_name-Flat End Mill 4": "Пласка торцева фреза 4 мм, 3 канавки, відрізна, хвостовик 4 мм", "key-default_name-HD Fill": "HD заповнення", "key-default_name-High Quality": "Висока якість", @@ -2410,7 +2410,7 @@ "key_menu_Unhide": "Показати", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація", "manualModeDesc": "Опис ручного режиму", - "key_ui-views-MaterialTestModal-FormComponent-title": "Матеріальний тест", + "key_ui-views-MaterialTestModal-FormComponent-title": "Тест матеріалу", "key_ui-views-MaterialTestModal-FormComponent-rows": "Ряди", "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Кількість рядів", "key_ui-views-MaterialTestModal-FormComponent-columns": "Стовпці", From c437c464af812858a7679292d25054c623540a94 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 12 Dec 2024 19:04:00 +0800 Subject: [PATCH 51/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index ff092e24ef..1fc5a3d793 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -1088,6 +1088,8 @@ "key-App/Settings/MachineSettings-High CNC": "200W CNC", "key-App/Settings/MachineSettings-Laser": "Laser", "key-App/Settings/MachineSettings-Laser Toolhead": "Laser-Modul", + "key-App/Settings/MachineSettings-Port Settings Tips": "Bitte geben Sie eine Zahl ein", + "key-App/Settings/MachineSettings-Port Settings": "Port-Einstellungen", "key-App/Settings/MachineSettings-Machine": "Gerät", "key-App/Settings/MachineSettings-Modules": "Module", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Einzelner Extruder", @@ -2252,7 +2254,7 @@ "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", - "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", From 9412400f78745e3a3895b79ba1c92822e5135898 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 12 Dec 2024 19:04:02 +0800 Subject: [PATCH 52/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index 44f7253547..4f8f917e6f 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -1088,6 +1088,8 @@ "key-App/Settings/MachineSettings-High CNC": "200W CNC", "key-App/Settings/MachineSettings-Laser": "Laser", "key-App/Settings/MachineSettings-Laser Toolhead": "Modulo laser", + "key-App/Settings/MachineSettings-Port Settings Tips": "Inserisci un numero", + "key-App/Settings/MachineSettings-Port Settings": "Impostazioni della porta", "key-App/Settings/MachineSettings-Machine": "Macchina", "key-App/Settings/MachineSettings-Modules": "Modules", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Estrusore singolo", @@ -2252,7 +2254,7 @@ "key-default_name-Fast Print": "Stampa veloce", "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", "key-default_name-Flat End Mill 1.5": "Fresa a testa piatta 1,5", - "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "Fresa a testa piatta 3,175", "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Alta qualità", From c6645bb8cc13d3ced950c42da3d7d8ae41cfa999 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 12 Dec 2024 19:04:03 +0800 Subject: [PATCH 53/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 0e5520b250..4256cfbecd 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -1088,6 +1088,8 @@ "key-App/Settings/MachineSettings-High CNC": "200W", "key-App/Settings/MachineSettings-Laser": "Лазер", "key-App/Settings/MachineSettings-Laser Toolhead": "Лазерний модуль", + "key-App/Settings/MachineSettings-Port Settings Tips": "Будь ласка, введіть число", + "key-App/Settings/MachineSettings-Port Settings": "Налаштування порту", "key-App/Settings/MachineSettings-Machine": "Пристрій", "key-App/Settings/MachineSettings-Modules": "Модулі", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "Одинарний екструдер", From 3e4feddc7492ff95291eb9d10ffb4f6e8c7eaa84 Mon Sep 17 00:00:00 2001 From: parachvte Date: Thu, 12 Dec 2024 19:04:05 +0800 Subject: [PATCH 54/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index b12e2b935e..ef92f6d66b 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -1088,6 +1088,8 @@ "key-App/Settings/MachineSettings-High CNC": "高功率CNC", "key-App/Settings/MachineSettings-Laser": "激光加工", "key-App/Settings/MachineSettings-Laser Toolhead": "激光模组", + "key-App/Settings/MachineSettings-Port Settings Tips": "请输入数字", + "key-App/Settings/MachineSettings-Port Settings": "端口设置", "key-App/Settings/MachineSettings-Machine": "机器", "key-App/Settings/MachineSettings-Modules": "模组", "key-App/Settings/MachineSettings-Single Extruder Toolhead": "单喷头", @@ -2234,7 +2236,7 @@ "key-default_name-Breakaway Support-White": "白色-Breakaway Support", "key-default_name-CUT": "CUT", "key-default_name-Carving V-bit": "三棱雕刻刀 3.175mm 刀柄", - "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", + "key-default_name-Carving V-bit 4": "平底雕刻刀 4mm 刀柄", "key-default_name-Cutting 1.5mm": "切割 1.5 毫米", "key-default_name-Cutting 1.6mm": "切割 1.6 毫米", "key-default_name-Cutting 10mm": "切割 10 毫米", @@ -2252,7 +2254,7 @@ "key-default_name-Fast Print": "快速打印", "key-default_name-Fast-Line-filled Engraving": "快速线填充", "key-default_name-Flat End Mill 1.5": "单刃平头铣刀 1.5mm 刃径 3.175mm 刀柄", - "key-default_name-Flat End Mill 3.175": "Flat End Mill 3.175mm Cutting 3.175mm Shank", + "key-default_name-Flat End Mill 3.175": "平头铣刀 3.175mm 刃径 3.175mm 刀柄", "key-default_name-Flat End Mill 4": "三刃平头铣刀 4mm 刃径 4mm 刀柄", "key-default_name-HD Fill": "HD 填充", "key-default_name-High Quality": "高品质", From f4c09ae1250317f2735e08c81e95a1c5884953cc Mon Sep 17 00:00:00 2001 From: parachvte Date: Fri, 13 Dec 2024 20:35:43 +0800 Subject: [PATCH 55/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 1fc5a3d793..8cdc99d5e0 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2231,12 +2231,12 @@ "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", "key-default_name-ASA": "ASA-Black", - "key-default_name-Ball End Mill": "Kugelfräser", - "key-default_name-Ball End Mill 2": "Ball End Mill 2mm Cutting 4mm Shank", + "key-default_name-Ball End Mill": "Kugelfräser 3,175mm Schaft 3,175mm", + "key-default_name-Ball End Mill 2": "Kugelfräser 2mm Schaft 4mm", "key-default_name-Breakaway Support-White": "Breakaway Support-Weiß", "key-default_name-CUT": "CUT", - "key-default_name-Carving V-bit": "V-Bit schnitzen", - "key-default_name-Carving V-bit 4": "Carving V-bit 4mm Shank", + "key-default_name-Carving V-bit": "V-Bit Schaft 3,175mm", + "key-default_name-Carving V-bit 4": "V-Bit Schaft 4mm", "key-default_name-Cutting 1.5mm": "Schneiden 1,5 mm", "key-default_name-Cutting 1.6mm": "Schneiden 1,6 mm", "key-default_name-Cutting 10mm": "Schneiden 10 mm", @@ -2253,9 +2253,9 @@ "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", - "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5", - "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175", - "key-default_name-Flat End Mill 4": "3-flute Flat End Mill 4mm Cutting 4mm Shank", + "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5mm einschneidig", + "key-default_name-Flat End Mill 3.175": "Flachfräser 3,175mm Schaft 3,175mm", + "key-default_name-Flat End Mill 4": "Flachfräser 4mm 3-schneidig Schaft 4mm", "key-default_name-HD Fill": "HD Fill", "key-default_name-High Quality": "Hohe Qualität", "key-default_name-Line filled": "Standard Linien gefüllt", From f3b8ccbcb995b0e63cadf10a336b562b560d4991 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 17 Dec 2024 12:55:23 +0800 Subject: [PATCH 56/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 8cdc99d5e0..19723605f5 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2412,7 +2412,7 @@ "key_menu_Unhide": "Einblenden", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Umwandlung", "manualModeDesc": "Oberfläche manueller Modus", - "key_ui-views-MaterialTestModal-FormComponent-title": "Materialtest", + "key-Laser/MainToolBar-MaterialTesting": "Materialtest", "key_ui-views-MaterialTestModal-FormComponent-rows": "Reihen", "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Reihenzahl", "key_ui-views-MaterialTestModal-FormComponent-columns": "Spalten", From dfbbfad1401cd4ded8b67e7c738bbe292c09e1bb Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 17 Dec 2024 12:55:24 +0800 Subject: [PATCH 57/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index 4f8f917e6f..c7daafc5c1 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -2412,7 +2412,7 @@ "key_menu_Unhide": "Scopri", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Trasformazione", "manualModeDesc": "manualModeDesc", - "key_ui-views-MaterialTestModal-FormComponent-title": "Test del Materiale", + "key-Laser/MainToolBar-MaterialTesting": "Test del Materiale", "key_ui-views-MaterialTestModal-FormComponent-rows": "Righe", "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Conteggio Righe", "key_ui-views-MaterialTestModal-FormComponent-columns": "Colonne", From 7fcc11d7faa2d40a31ab4d6d1675134c25bd8e58 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 17 Dec 2024 12:55:26 +0800 Subject: [PATCH 58/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 4256cfbecd..866fe5a3d7 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2412,7 +2412,7 @@ "key_menu_Unhide": "Показати", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація", "manualModeDesc": "Опис ручного режиму", - "key_ui-views-MaterialTestModal-FormComponent-title": "Тест матеріалу", + "key-Laser/MainToolBar-MaterialTesting": "Матеріальний тест", "key_ui-views-MaterialTestModal-FormComponent-rows": "Ряди", "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Кількість рядів", "key_ui-views-MaterialTestModal-FormComponent-columns": "Стовпці", From 68651fa45dd073c52a4e9a94bda76057ef34de95 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 17 Dec 2024 12:55:27 +0800 Subject: [PATCH 59/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index ef92f6d66b..badc0df4eb 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -2412,7 +2412,7 @@ "key_menu_Unhide": "取消隐藏", "key_ui/widgets/CNCPath/CNCPath_Transformation": "变换", "manualModeDesc": "manualModeDesc", - "key_ui-views-MaterialTestModal-FormComponent-title": "材料测试", + "key-Laser/MainToolBar-MaterialTesting": "材料测试", "key_ui-views-MaterialTestModal-FormComponent-rows": "行", "key_ui-views-MaterialTestModal-FormComponent-rowCount": "行数", "key_ui-views-MaterialTestModal-FormComponent-columns": "列", From 1a77eabd6346a63b03e8c3f7d7b0cc279ca35476 Mon Sep 17 00:00:00 2001 From: parachvte Date: Mon, 30 Dec 2024 05:10:54 +0800 Subject: [PATCH 60/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index badc0df4eb..2cd9ee22f0 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -375,7 +375,7 @@ "Keep the device attended while it is in use!": "使用设备时，请保持有人值守！", "Key-Laser/ImportScale-Object size has exceeded the work size. Scale it to the maximum work size?": "对象超过工作尺寸，是否缩放至合适尺寸？", "Key-Laser/ImportScale-Scale To Fit": "缩放适应", - "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.", + "Key-Workspace/LaserStart-offset-warning-After printing with the 2W red light extruder connected via serial, the working origin may be changed (X offset {{ xOffset }}, Y offset {{ yOffset }}). Please be aware of this issue when performing repeated engravings.": "", "Key-Workspace/LaserStartJob-manual_mode_description": "手动模式描述", "Knot": "结点", "Laser Emitter Overheat. Please power off the machine, wait for a while, and restart.If this occurs frequently, contact our Support for help.": "激光发射器过热。请关闭机器，等待一段时间，然后重新启动。如果这种情况频繁发生，请联系我们的支持团队寻求帮助。", @@ -404,7 +404,7 @@ "Line Width": "走线宽度", "Lines": "直线", "Load New G-code": "加载新的 G 代码", - "Mach3": "Mach3", + "Mach3": "", "Machine": "机器", "Machine Control": "机器控制", "Machine Depth": "机器深度", From 81e2454f116f2effca3cf7964c2a1f8b42ec8d66 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 31 Dec 2024 19:18:13 +0800 Subject: [PATCH 61/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 866fe5a3d7..03ceab0ec4 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2412,7 +2412,7 @@ "key_menu_Unhide": "Показати", "key_ui/widgets/CNCPath/CNCPath_Transformation": "Трансформація", "manualModeDesc": "Опис ручного режиму", - "key-Laser/MainToolBar-MaterialTesting": "Матеріальний тест", + "key-Laser/MainToolBar-MaterialTesting": "Тест матеріалу", "key_ui-views-MaterialTestModal-FormComponent-rows": "Ряди", "key_ui-views-MaterialTestModal-FormComponent-rowCount": "Кількість рядів", "key_ui-views-MaterialTestModal-FormComponent-columns": "Стовпці", From d636615c462ed1268d3fb3a4b674accb55b071d0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 14 Jan 2025 01:03:10 +0800 Subject: [PATCH 62/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 03ceab0ec4..9e82f8b57a 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2214,6 +2214,7 @@ "key-default_category-Default Tool": "Типовий інструмент", "key-default_category-Epoxy Tooling Board": "Епоксидна дошка", "key-default_category-MDF": "МДФ", + "key-default_category-Material Test": "Тест матеріалу", "key-default_category-New Profile": "Новий профіль", "key-default_category-Nylon": "Нейлон", "key-default_category-Other": "Інше", @@ -2227,6 +2228,19 @@ "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Дублена шкіра", "key-default_category-Walnut": "Горіх", + "key-default_category-Plywood": "Фанера", + "key-default_category-Ceramic": "Кераміка", + "key-default_category-Bamboo": "Бамбук", + "key-default_category-Stainless Steel": "Нержавіюча сталь", + "key-default_category-Dark Glass": "Темне скло", + "key-default_category-Painted Metal": "Пофарбований метал", + "key-default_category-Silver": "Срібло", + "key-default_category-Titanium": "Титан", + "key-default_category-Beechwood": "Бук", + "key-default_category-Canvas": "Полотно", + "key-default_category-Gold": "Золото", + "key-default_category-Anodized Aluminum": "Анодований алюміній", + "key-default_category-Leather": "Шкіра", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ASA", "key-default_name-ABS_White": "ABS-White", @@ -2245,12 +2259,14 @@ "key-default_name-Cutting 300g": "Прорізання 300 г", "key-default_name-Cutting 350g": "Прорізання 350 г", "key-default_name-Cutting 3mm": "Прорізання 3 мм", + "key-default_name-Cutting 3.175mm": "Прорізання 3.175 мм", "key-default_name-Cutting 4mm": "Прорізання 4 мм", "key-default_name-Cutting 5mm": "Прорізання 5 мм", "key-default_name-Cutting 6mm": "Прорізання 6 мм", "key-default_name-Cutting 8mm": "Прорізання 8 мм", "key-default_name-Dot filled": "Стандартне точкове заповнення", "key-default_name-Dot-filled Engraving": "Точкове заповнення", + "key-default_name-Default Engraving": "Стандартне гравіювання", "key-default_name-Fast Print": "Швидкий друк", "key-default_name-Fast-Line-filled Engraving": "Швидке лінійне заповнення", "key-default_name-Flat End Mill 1.5": "Пласка торцева фреза 1.5 мм, 1 канавка, відрізна, хвостовик 3.175 мм", @@ -2291,6 +2307,7 @@ "key-default_name-SD Fill": "SD заповнення", "key-default_name-Smooth Surface": "Гладка поверхня", "key-default_name-Straight Groove V-bit": "V-подібна пряма фреза", + "key-default_name-Standard-line-filled Engraving": "Гравіювання зі стандартним лінійним заповненням", "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU-Yellow", "key-default_name-Vector Engraving": "Векторне гравіювання", From b39ddc18dcf185612c64b9d2bf477401726ae032 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 14 Jan 2025 01:03:12 +0800 Subject: [PATCH 63/68] New translations resource.json (Chinese Simplified) --- src/app/resources/i18n/zh-CN/resource.json | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/src/app/resources/i18n/zh-CN/resource.json b/src/app/resources/i18n/zh-CN/resource.json index 2cd9ee22f0..ddc5e52e43 100644 --- a/src/app/resources/i18n/zh-CN/resource.json +++ b/src/app/resources/i18n/zh-CN/resource.json @@ -2214,6 +2214,7 @@ "key-default_category-Default Tool": "默认刀具", "key-default_category-Epoxy Tooling Board": "代木", "key-default_category-MDF": "中密度纤维板", + "key-default_category-Material Test": "材料测试", "key-default_category-New Profile": "新配置文件", "key-default_category-Nylon": "Nylon", "key-default_category-Other": "Other", @@ -2227,6 +2228,19 @@ "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "植鞣革", "key-default_category-Walnut": "胡桃木", + "key-default_category-Plywood": "Plywood", + "key-default_category-Ceramic": "Ceramic", + "key-default_category-Bamboo": "Bamboo", + "key-default_category-Stainless Steel": "Stainless Steel", + "key-default_category-Dark Glass": "Dark Glass", + "key-default_category-Painted Metal": "Painted Metal", + "key-default_category-Silver": "Silver", + "key-default_category-Titanium": "Titanium", + "key-default_category-Beechwood": "Beechwood", + "key-default_category-Canvas": "Canvas", + "key-default_category-Gold": "Gold", + "key-default_category-Anodized Aluminum": "Anodized Aluminum", + "key-default_category-Leather": "Leather", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "黑色-ABS", "key-default_name-ABS_White": "白色-ABS", @@ -2245,12 +2259,14 @@ "key-default_name-Cutting 300g": "切割 300 克", "key-default_name-Cutting 350g": "切割 350 克", "key-default_name-Cutting 3mm": "切割 3 毫米", + "key-default_name-Cutting 3.175mm": "切割 3.175 毫米", "key-default_name-Cutting 4mm": "切割 4 毫米", "key-default_name-Cutting 5mm": "切割 5 毫米", "key-default_name-Cutting 6mm": "切割 6 毫米", "key-default_name-Cutting 8mm": "切割 8 毫米", "key-default_name-Dot filled": "标准点填充", "key-default_name-Dot-filled Engraving": "点填充雕刻", + "key-default_name-Default Engraving": "默认雕刻", "key-default_name-Fast Print": "快速打印", "key-default_name-Fast-Line-filled Engraving": "快速线填充", "key-default_name-Flat End Mill 1.5": "单刃平头铣刀 1.5mm 刃径 3.175mm 刀柄", @@ -2291,6 +2307,7 @@ "key-default_name-SD Fill": "SD 填充", "key-default_name-Smooth Surface": "表面光滑", "key-default_name-Straight Groove V-bit": "直槽尖刀", + "key-default_name-Standard-line-filled Engraving": "标准线填充雕刻", "key-default_name-TPU_Black": "黑色-TPU", "key-default_name-TPU_Yellow": "黄色-TPU", "key-default_name-Vector Engraving": "矢量雕刻", From f6a4c7385d2e6bb6facc46f051e10861707538c0 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 14 Jan 2025 01:03:13 +0800 Subject: [PATCH 64/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 19723605f5..303c0ae343 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2214,6 +2214,7 @@ "key-default_category-Default Tool": "Standard-Werkzeug", "key-default_category-Epoxy Tooling Board": "Epoxid-Werkzeugplatte", "key-default_category-MDF": "MDF", + "key-default_category-Material Test": "Material Test", "key-default_category-New Profile": "Neues Profil", "key-default_category-Nylon": "Nylon", "key-default_category-Other": "Sonstiges", @@ -2227,6 +2228,19 @@ "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Pflanzlich gegerbtes Leder", "key-default_category-Walnut": "Walnuss", + "key-default_category-Plywood": "Plywood", + "key-default_category-Ceramic": "Ceramic", + "key-default_category-Bamboo": "Bamboo", + "key-default_category-Stainless Steel": "Stainless Steel", + "key-default_category-Dark Glass": "Dark Glass", + "key-default_category-Painted Metal": "Painted Metal", + "key-default_category-Silver": "Silver", + "key-default_category-Titanium": "Titanium", + "key-default_category-Beechwood": "Beechwood", + "key-default_category-Canvas": "Canvas", + "key-default_category-Gold": "Gold", + "key-default_category-Anodized Aluminum": "Anodized Aluminum", + "key-default_category-Leather": "Leather", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", @@ -2245,12 +2259,14 @@ "key-default_name-Cutting 300g": "Schneiden 300 g", "key-default_name-Cutting 350g": "Schneiden 350 g", "key-default_name-Cutting 3mm": "Schneiden 3 mm", + "key-default_name-Cutting 3.175mm": "Schneiden 3.175 mm", "key-default_name-Cutting 4mm": "Schneiden 4 mm", "key-default_name-Cutting 5mm": "Schneiden 5 mm", "key-default_name-Cutting 6mm": "6mm schneiden", "key-default_name-Cutting 8mm": "Schneiden 8 mm", "key-default_name-Dot filled": "Standard Punkt gefüllt", "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", + "key-default_name-Default Engraving": "Default Engraving", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5mm einschneidig", @@ -2291,6 +2307,7 @@ "key-default_name-SD Fill": "SD-Füllung", "key-default_name-Smooth Surface": "Glatte Oberfläche", "key-default_name-Straight Groove V-bit": "V-Bit mit gerader Nut", + "key-default_name-Standard-line-filled Engraving": "Standard-line-filled Engraving", "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU Gelb", "key-default_name-Vector Engraving": "Vektor-Gravur", From bc63efe6ed51c17f9e8def0596a72768bf504558 Mon Sep 17 00:00:00 2001 From: parachvte Date: Tue, 14 Jan 2025 01:03:15 +0800 Subject: [PATCH 65/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index c7daafc5c1..7f03d58362 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -2214,6 +2214,7 @@ "key-default_category-Default Tool": "Utensile predefinito", "key-default_category-Epoxy Tooling Board": "Scheda per utensili epossidici", "key-default_category-MDF": "MDF", + "key-default_category-Material Test": "Material Test", "key-default_category-New Profile": "Nuovo profilo", "key-default_category-Nylon": "Nylon", "key-default_category-Other": "Altro", @@ -2227,6 +2228,19 @@ "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Pelle conciata vegetale", "key-default_category-Walnut": "Walnut", + "key-default_category-Plywood": "Plywood", + "key-default_category-Ceramic": "Ceramic", + "key-default_category-Bamboo": "Bamboo", + "key-default_category-Stainless Steel": "Stainless Steel", + "key-default_category-Dark Glass": "Dark Glass", + "key-default_category-Painted Metal": "Painted Metal", + "key-default_category-Silver": "Silver", + "key-default_category-Titanium": "Titanium", + "key-default_category-Beechwood": "Beechwood", + "key-default_category-Canvas": "Canvas", + "key-default_category-Gold": "Gold", + "key-default_category-Anodized Aluminum": "Anodized Aluminum", + "key-default_category-Leather": "Leather", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ABS-Nero", "key-default_name-ABS_White": "ABS-Bianco", @@ -2245,12 +2259,14 @@ "key-default_name-Cutting 300g": "Taglio 300 g", "key-default_name-Cutting 350g": "Taglio 350 g", "key-default_name-Cutting 3mm": "Taglio 3 mm", + "key-default_name-Cutting 3.175mm": "Taglio 3.175 mm", "key-default_name-Cutting 4mm": "Taglio 4 mm", "key-default_name-Cutting 5mm": "Taglio 5 mm", "key-default_name-Cutting 6mm": "Cutting 6mm", "key-default_name-Cutting 8mm": "Taglio 8 mm", "key-default_name-Dot filled": "Standard dot filled", "key-default_name-Dot-filled Engraving": "Incisione a punti", + "key-default_name-Default Engraving": "Default Engraving", "key-default_name-Fast Print": "Stampa veloce", "key-default_name-Fast-Line-filled Engraving": "Fast Line-filled", "key-default_name-Flat End Mill 1.5": "Fresa a testa piatta 1,5", @@ -2291,6 +2307,7 @@ "key-default_name-SD Fill": "SD Fill", "key-default_name-Smooth Surface": "Superficie Liscia", "key-default_name-Straight Groove V-bit": "Punta a V con gola dritta", + "key-default_name-Standard-line-filled Engraving": "Standard-line-filled Engraving", "key-default_name-TPU_Black": "TPU-Nero", "key-default_name-TPU_Yellow": "TPU-Giallo", "key-default_name-Vector Engraving": "Incisione vettoriale", From 7adc62de850d6083adcd2ba128e0f3c4e29a19b1 Mon Sep 17 00:00:00 2001 From: parachvte Date: Wed, 15 Jan 2025 00:59:30 +0800 Subject: [PATCH 66/68] New translations resource.json (Ukrainian) --- src/app/resources/i18n/uk/resource.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/app/resources/i18n/uk/resource.json b/src/app/resources/i18n/uk/resource.json index 9e82f8b57a..412b122888 100644 --- a/src/app/resources/i18n/uk/resource.json +++ b/src/app/resources/i18n/uk/resource.json @@ -2237,7 +2237,7 @@ "key-default_category-Silver": "Срібло", "key-default_category-Titanium": "Титан", "key-default_category-Beechwood": "Бук", - "key-default_category-Canvas": "Полотно", + "key-default_category-Canvas": "Тканина", "key-default_category-Gold": "Золото", "key-default_category-Anodized Aluminum": "Анодований алюміній", "key-default_category-Leather": "Шкіра", From a7be3268d14bd41aec639a9ed8cafc09f7b76bfc Mon Sep 17 00:00:00 2001 From: parachvte Date: Sun, 19 Jan 2025 18:39:53 +0800 Subject: [PATCH 67/68] New translations resource.json (Italian) --- src/app/resources/i18n/it/resource.json | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/src/app/resources/i18n/it/resource.json b/src/app/resources/i18n/it/resource.json index 7f03d58362..dd1b2086be 100644 --- a/src/app/resources/i18n/it/resource.json +++ b/src/app/resources/i18n/it/resource.json @@ -1,10 +1,10 @@ { "0 Gap": "0 Gap", - "20W Laser Module": "20W Laser Module", - "2W Laser Module": "2W Laser Module", + "20W Laser Module": "Modulo laser da 20W", + "2W Laser Module": "Modulo laser da 2W", "3D Printer": "Stampante 3D", - "40W Laser Module": "40W Laser Module", - "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.", + "40W Laser Module": "Modulo laser da 40W", + "A value of 0-4095 adjusts the sensor sensitivity, with lower values indicating lower sensitivity. A value of 4096 turns off detection.": "Un valore nell'intervallo 0-4095 regola la sensibilità del sensore, con valori più bassi che indicano sensibilità minore. Il valore 4096 spegne del tutto la rilevazione.", "ABS": "ABS", "ASA": "ASA", "Abnormal Laser Emitter. Please contact our Support for help.": "Abnormal Laser Emitter. Please contact our Support for help.", @@ -76,7 +76,7 @@ "Brim Only on Outside": "Brim solo fuori", "Brim Replaces Support": "Brim sostituisce supporti", "Brim Width": "Larghezza brim", - "Bug fixes": "Bug fixes", + "Bug fixes": "Correzioni", "Build Plate Adhesion": "Tipo di adesione al piano di stampa", "Build Plate Adhesion Extruder": "Estrusore per l'adesione al piano di stampa", "Build Plate Adhesion Type": "Tipo di adesione della piastra di costruzione", From 1462bb1027cc8b2816a78aa5849c8d72fc6109f4 Mon Sep 17 00:00:00 2001 From: parachvte Date: Sat, 8 Feb 2025 23:18:42 +0800 Subject: [PATCH 68/68] New translations resource.json (German) --- src/app/resources/i18n/de/resource.json | 30 ++++++++++++------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/src/app/resources/i18n/de/resource.json b/src/app/resources/i18n/de/resource.json index 303c0ae343..18c6e68a66 100644 --- a/src/app/resources/i18n/de/resource.json +++ b/src/app/resources/i18n/de/resource.json @@ -2214,7 +2214,7 @@ "key-default_category-Default Tool": "Standard-Werkzeug", "key-default_category-Epoxy Tooling Board": "Epoxid-Werkzeugplatte", "key-default_category-MDF": "MDF", - "key-default_category-Material Test": "Material Test", + "key-default_category-Material Test": "Materialtest", "key-default_category-New Profile": "Neues Profil", "key-default_category-Nylon": "Nylon", "key-default_category-Other": "Sonstiges", @@ -2228,19 +2228,19 @@ "key-default_category-TPU": "TPU", "key-default_category-Vegetable Tanned Leather": "Pflanzlich gegerbtes Leder", "key-default_category-Walnut": "Walnuss", - "key-default_category-Plywood": "Plywood", - "key-default_category-Ceramic": "Ceramic", - "key-default_category-Bamboo": "Bamboo", - "key-default_category-Stainless Steel": "Stainless Steel", - "key-default_category-Dark Glass": "Dark Glass", - "key-default_category-Painted Metal": "Painted Metal", - "key-default_category-Silver": "Silver", - "key-default_category-Titanium": "Titanium", - "key-default_category-Beechwood": "Beechwood", - "key-default_category-Canvas": "Canvas", + "key-default_category-Plywood": "Sperrholz", + "key-default_category-Ceramic": "Keramik", + "key-default_category-Bamboo": "Bambus", + "key-default_category-Stainless Steel": "Edelstahl", + "key-default_category-Dark Glass": "Dunkles Glas", + "key-default_category-Painted Metal": "Lackiertes Metall", + "key-default_category-Silver": "Silber", + "key-default_category-Titanium": "Titan", + "key-default_category-Beechwood": "Buchenholz", + "key-default_category-Canvas": "Leinen", "key-default_category-Gold": "Gold", - "key-default_category-Anodized Aluminum": "Anodized Aluminum", - "key-default_category-Leather": "Leather", + "key-default_category-Anodized Aluminum": "Anodiertes Aluminium", + "key-default_category-Leather": "Leder", "key-default_name-ABS": "ABS", "key-default_name-ABS_Black": "ABS-Black", "key-default_name-ABS_White": "ABS-White", @@ -2266,7 +2266,7 @@ "key-default_name-Cutting 8mm": "Schneiden 8 mm", "key-default_name-Dot filled": "Standard Punkt gefüllt", "key-default_name-Dot-filled Engraving": "Punktgefüllte Gravur", - "key-default_name-Default Engraving": "Default Engraving", + "key-default_name-Default Engraving": "Standard Gravur", "key-default_name-Fast Print": "Schnelldruck", "key-default_name-Fast-Line-filled Engraving": "Schnell gefüllt mit Linien", "key-default_name-Flat End Mill 1.5": "Flachfräser 1,5mm einschneidig", @@ -2307,7 +2307,7 @@ "key-default_name-SD Fill": "SD-Füllung", "key-default_name-Smooth Surface": "Glatte Oberfläche", "key-default_name-Straight Groove V-bit": "V-Bit mit gerader Nut", - "key-default_name-Standard-line-filled Engraving": "Standard-line-filled Engraving", + "key-default_name-Standard-line-filled Engraving": "Standard Linien gefüllte Gravur", "key-default_name-TPU_Black": "TPU-Black", "key-default_name-TPU_Yellow": "TPU Gelb", "key-default_name-Vector Engraving": "Vektor-Gravur",