WLANPI R4 WLAN Console - Telnet with twice input by the enter key

[schraderbn]

Hi!
Ich can reach an Extreme Networks Switch by the WLAN console of the WLANPi but have the problem that each hit on the enter key will be send twice. So I can enter the login name but after the enter key I have no chance to type iin the password. A direct serial connection withou the WLANPi works fine with the same Terminal application. I checked all setting of the Terminal program and can´t find any settings to change this behavior. Is there a way to set up the WLANPi for that issue?

I tried different settings in the ser2net.conf without success, even with the standard conf it is the same issue.

Thanks for your support!

#Originally used ports for backwards compatibility adapter #1
2400:telnet:3600:/dev/ttyUSB0:2400 8DATABITS NONE 1STOPBIT banner
4800:telnet:3600:/dev/ttyUSB0:4800 8DATABITS NONE 1STOPBIT banner
9600:telnet:3600:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT -XONXOFF banner
19200:telnet:3600:/dev/ttyUSB0:19200 8DATABITS NONE 1STOPBIT banner
38400:telnet:3600:/dev/ttyUSB0:38400 8DATABITS NONE 1STOPBIT banner
11520:telnet:3600:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner

#USB-to-serial adapter #1
2401:telnet:3600:/dev/ttyUSB0:2400 8DATABITS NONE 1STOPBIT banner
4801:telnet:3600:/dev/ttyUSB0:4800 8DATABITS NONE 1STOPBIT banner
9601:telnet:3600:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT banner
19201:telnet:3600:/dev/ttyUSB0:19200 8DATABITS NONE 1STOPBIT banner
38401:telnet:3600:/dev/ttyUSB0:38400 8DATABITS NONE 1STOPBIT banner
11521:telnet:3600:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner

[jiribrejcha]

Does this fix it, @schraderbn?

https://superuser.com/questions/1814105/ser2net-returns-double-lines-in-terminal-what-to-do
https://sourceforge.net/p/ser2net/discussion/90083/thread/c73748c6a8/

[schraderbn]

Hi Jiri,

no, this doesnt work. There are two differen config-files. I tried everything I can but without success. I tried to configer the yaml file, too -without any change. I found a better way to get an ssh connection to the switch via the Wi-Fi Console port:

With Wi-Fi Console running on the WLANPi I connected to the WLANPi with ssh and started a ssh connection to the switch, which is connected to the WLANPi by console cable: screen ttyUSB0

So this is better than telnet.

So you can close this case.

Thanks for your help.

Best regards

Jens