Just for info: works with moOde 9 if installed using source

[merlin699]

Just to let you know: after failing installing using the binary package, I successfully installed MPD OLED on my Rpi3b+ with SPI display and moOde Version 9 using the "from source" method for moOde 8:
https://github.com/antiprism/mpd_oled/blob/master/doc/install_moode8_source.md

[antiprism]

Thanks

[ROCH-23]

Привет! Я не могу загрузить дисплеи,команда не проходит
Raspberry Pi 4

cd .. # if you are still in the cava source directory
git clone https://github.com/antiprism/mpd_oled
cd mpd_oled
./bootstrap
CPPFLAGS="-W -Wall -Wno-psabi" ./configure --prefix=/usr/local
make
sudo make install-strip

pi@moOde:/home $ pi@moOde:/home $ sudo make install-stripcd .. # if you are still in the cava source directory
-bash: pi@moOde:/home: No such file or directory
pi@moOde:/home $ git clone https://github.com/antiprism/mpd_oled
-bash: git: command not found
pi@moOde:/home $ cd mpd_oled
-bash: cd: mpd_oled: No such file or directory
pi@moOde:/home $ ./bootstrap
-bash: ./bootstrap: No such file or directory
pi@moOde:/home $ CPPFLAGS="-W -Wall -Wno-psabi" ./configure --prefix=/usr/local
-bash: ./configure: No such file or directory
pi@moOde:/home $ make
make: *** No targets specified and no makefile found. Stop.
pi@moOde:/home $ sudo make install-stripmake: *** No rule to make target 'install-stripcd'. Stop.
pi@moOde:/home $
make: *** No rule to make target 'install-stripmake:'. Stop.

[antiprism]

Hi ROCH-23

Please post in English.

There appear to be (at least) two issues:

You should be in /home/pi, and cava and mpd_oled subdirectories, but you appear to have run an extra cd .. which has taken you up a level to /home.

It looks like git is not installed, so run

sudo apt install git

Adrian.

[ROCH-23]

Adrian, I can't download mpd_oled , cava I downloaded

pi@moOde:/ $ sudo apt install git
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
git is already the newest version (1:2.39.5-0+deb12u2).
0 upgraded, 0 newly installed, 0 to remove and 89 not upgraded.
pi@moOde:/ $ cd .. # if you are still in the cava source directory
pi@moOde:/ $ git clone https://github.com/antiprism/mpd_oled
fatal: could not create work tree dir 'mpd_oled': Permission denied
pi@moOde:/ $ cd mpd_oled
-bash: cd: mpd_oled: No such file or directory
pi@moOde:/ $ ./bootstrap
-bash: ./bootstrap: No such file or directory
pi@moOde:/ $ CPPFLAGS="-W -Wall -Wno-psabi" ./configure --prefix=/usr/local
-bash: ./configure: No such file or directory
pi@moOde:/ $ make
make: *** No targets specified and no makefile found. Stop.
pi@moOde:/ $ sudo make install-strip
make: *** No rule to make target 'install-strip'. Stop.
pi@moOde:/ $

[antiprism]

Don't run this command

pi@moOde:/ $ cd .. # if you are still in the cava source directory

Because you are not in the cava source directory

[ROCH-23]

What commands should I write to load the displays?

[antiprism]

Carry on with the instructions from here

https://github.com/antiprism/mpd_oled/blob/master/doc/install_moode8_source.md#build-and-install-mpd_oled

But don't run the first command. (Don't run cd .. # if you are still in the cava source directory)

[antiprism]

And, you should start running commands in the directory /home/pi. Check this before you start by running

pwd

It should print /home/pi

[ROCH-23]

checking for uint64_t... yes
checking for uint8_t... yes
checking for GNU libc compatible malloc... yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for gettimeofday... yes
checking for memset... yes
checking for mkfifo... yes
checking for munmap... yes
checking for select... yes
checking for setlocale... yes
checking for socket... yes
checking for strerror... yes
checking for strspn... yes
checking for strstr... yes
checking for strtol... yes
checking for strndup... yes
checking LIBMPDCLIENT_DIR... no (using installed libmpdclient)
checking for mpd/client.h... no
configure: error: Install a development version of this library and rerun ./configure
pi@moOde:/mpd_oled/mpd_oled $ make
make: *** No targets specified and no makefile found. Stop.
pi@moOde:/mpd_oled/mpd_oled $ sudo make install-strip

[antiprism]

Did you previously run the command that installs the development library that is missing (libmpdclient)?

https://github.com/antiprism/mpd_oled/blob/master/doc/install_moode8_source.md#install-all-dependencies

[ROCH-23]

Выполняли ли вы ранее команду, устанавливающую отсутствующую библиотеку разработки (libmpdclient)?

https://github.com/antiprism/mpd_oled/blob/master/doc/install_moode8_source.md#install-all-dependentnesses

Host: moOde
RPiOS: 12.9 Bookworm 64-bit | Linux: 6.6.74 64-bit
Model: Pi-4B 8GB
Audio: HiFiBerry Digi+ Pro

    m o O d e   a u d i o   p l a y e r

          Release 9.2.4 2025-02-06
            (C) 2014 Tim Curtis

The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright or
in the moOde source files. moOde comes with absolutely
no warranties either expressed or implied, or any other
such guarantees.

** To change the password for your userid type 'passwd'.

Last login: Fri May 2 22:42:44 2025 from 192.168.1.122
pi@moOde:~ $ sudo apt update
sudo apt install autoconf make libtool libfftw3-dev libiniparser-dev libmpdclient-dev libi2c-dev i2c-tools lm-sensors git libasound2-dev
Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Get:5 https://dl.cloudsmith.io/public/moodeaudio/m8y/deb/raspbian bookworm InRelease [9,657 B]
Fetched 9,657 B in 2s (5,779 B/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
89 packages can be upgraded. Run 'apt list --upgradable' to see them.
pi@moOde:~ $ pwd
/home/pi
pi@moOde:~ $ git clone https://github.com/karlstav/cava
fatal: destination path 'cava' already exists and is not an empty directory.
pi@moOde:~ $ cd cava
pi@moOde:/cava $ ./autogen.sh
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
configure.ac:7: warning: The macro AC_PROG_CC_STDC' is obsolete. configure.ac:7: You should run autoupdate. ./lib/autoconf/c.m4:1666: AC_PROG_CC_STDC is expanded from... configure.ac:7: the top level configure.ac:9: warning: The macro AM_PROG_LIBTOOL' is obsolete.
configure.ac:9: You should run autoupdate.
aclocal.m4:123: AM_PROG_LIBTOOL is expanded from...
configure.ac:9: the top level
pi@moOde:/cava $ ./configure --disable-input-portaudio --disable-input-sndio --disable-output-ncurses --disable-input-pulse --program-prefix=mpd_oled_
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for ar... ar
checking the archiver (ar) interface... ar
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @file support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
configure: Checking OS
configure: Linux detected
checking for pthread.h... yes
checking for pthread_create in -lpthread... yes
checking for alloca.h... yes
checking for snd_pcm_open in -lasound... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libpipewire-0.3... yes
checking for jack... yes
checking for sqrt in -lm... yes
checking for fftw_execute in -lfftw3... yes
checking for SDL_Init in -lSDL2... yes
configure: You need to install the autoconf archives to check for opengl. Remember to re-run autogen.sh.
configure: INFO: building without sdl_glsl (opengl) support
checking for libiniparser... no
checking for iniparser_load in -liniparser... yes
iniparser > 3.2 test OK
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
config.status: executing libtool commands
pi@moOde:/cava $ make
make: Nothing to be done for 'all'.
pi@moOde:/cava $ sudo make install-strip
if test -z 'strip'; then
make INSTALL_PROGRAM="/bin/bash /home/pi/cava/install-sh -c -s"
install_sh_PROGRAM="/bin/bash /home/pi/cava/install-sh -c -s" INSTALL_STRIP_FLAG=-s
install;
else
make INSTALL_PROGRAM="/bin/bash /home/pi/cava/install-sh -c -s"
install_sh_PROGRAM="/bin/bash /home/pi/cava/install-sh -c -s" INSTALL_STRIP_FLAG=-s
"INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install;
fi
make[1]: Entering directory '/home/pi/cava'
make[2]: Entering directory '/home/pi/cava'
/usr/bin/mkdir -p '/usr/local/bin'
STRIPPROG='strip' /bin/bash ./libtool --mode=install /bin/bash /home/pi/cava/install-sh -c -s cava '/usr/local/bin/./mpd_oled_cava'
libtool: install: /bin/bash /home/pi/cava/install-sh -c -s cava /usr/local/bin/./mpd_oled_cava
/usr/bin/mkdir -p '/usr/local/share/consolefonts'
/usr/bin/install -c -m 644 cava.psf '/usr/local/share/consolefonts'
make[2]: Leaving directory '/home/pi/cava'
make[1]: Leaving directory '/home/pi/cava'
pi@moOde:/cava $ cd .. # if you are still in the cava source directory
pi@moOde: $ git clone https://github.com/antiprism/mpd_oled
fatal: destination path 'mpd_oled' already exists and is not an empty directory.
pi@moOde:~ $ cd mpd_oled
pi@moOde:/mpd_oled $ ./bootstrap
autoreconf: export WARNINGS=all
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I m4 -I m4
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: aclocal -I m4 -I m4
autoreconf: running: /usr/bin/autoconf --include=m4
autoreconf: running: /usr/bin/autoheader --include=m4
autoreconf: running: automake --add-missing --copy --no-force
autoreconf: Leaving directory '.'
pi@moOde:/mpd_oled $ CPPFLAGS="-W -Wall -Wno-psabi" ./configure --prefix=/usr/local
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... aarch64-unknown-linux-gnu
checking host system type... aarch64-unknown-linux-gnu
checking how to print strings... printf
checking whether make supports the include directive... yes (GNU style)
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking whether gcc understands -c and -o together... (cached) yes
checking dependency style of gcc... (cached) gcc3
checking whether g++ supports C++11 features with -std=c++11... yes
checking for fcntl.h... yes
checking for locale.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for sys/ioctl.h... yes
checking for sys/socket.h... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for _Bool... no
checking for stdbool.h that conforms to C99... yes
checking for inline... inline
checking for int16_t... yes
checking for int8_t... yes
checking for off_t... yes
checking for size_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for uint8_t... yes
checking for GNU libc compatible malloc... yes
checking for sys/param.h... yes
checking for getpagesize... yes
checking for working mmap... yes
checking for gettimeofday... yes
checking for memset... yes
checking for mkfifo... yes
checking for munmap... yes
checking for select... yes
checking for setlocale... yes
checking for socket... yes
checking for strerror... yes
checking for strspn... yes
checking for strstr... yes
checking for strtol... yes
checking for strndup... yes
checking LIBMPDCLIENT_DIR... no (using installed libmpdclient)
checking for mpd/client.h... no
configure: error: Install a development version of this library and rerun ./configure
pi@moOde:/mpd_oled $ make
make: *** No targets specified and no makefile found. Stop.
pi@moOde:/mpd_oled $ sudo make install-strip
make: *** No rule to make target 'install-strip'. Stop.
pi@moOde:/mpd_oled $ sudo mpd_oled_service_install
sudo: mpd_oled_service_install: command not found
pi@moOde:/mpd_oled $ sudo mpd_oled_service_install
sudo: mpd_oled_service_install:

[antiprism]

pi@moOde:~ $ sudo apt update
sudo apt install autoconf make libtool libfftw3-dev libiniparser-dev libmpdclient-dev libi2c-dev i2c-tools lm-sensors git libasound2-dev

There is no prompt for the second command, and I see no output for it. Copy and paste the commands one at a time. It appears that the way you copied the commands you did not run

sudo apt install autoconf make libtool libfftw3-dev libiniparser-dev libmpdclient-dev libi2c-dev i2c-tools lm-sensors git libasound2-dev

[ROCH-23]

Adrian, everything worked! The last command helped to solve the problem! I think it is possible to make instructions for installing version 9. Everything works, many thanks to Adrian!

[antiprism]

That is great! I'm really pleased it worked out.

[tobeehh]

@antiprism I followed your instructions, however cava is not running

pi@beosound3:~ $ cava -h
-bash: cava: command not found

the screen works, but doesnt show any title info or spectrum when the raspberry is chosen as audio player

Host: beosound3
RPiOS: 12.11 Bookworm 64-bit | Linux: 6.12.25 64-bit
Model: Pi-Zero 2 W 512MB
Audio: Pi HDMI 1