diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.cs.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.cs.xlf index 0acffa5e309e..2863d684e122 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.cs.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.cs.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Nelze použít profil spouštění {0}, protože soubor nastavení spouštění nebyl nalezen. Vyzkoušená umístění: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Upozornění: Nastavení z {0} nejsou použita, protože {1} má přednost. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.de.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.de.xlf index 222ad213cc7c..369ec3adddc0 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.de.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.de.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Das Startprofil „{0}“ kann nicht verwendet werden, da die Datei mit den Starteinstellungen nicht gefunden wurde. Versuchte Speicherorte: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Warnung: Einstellungen von „{0}“ werden nicht verwendet, weil „{1}“ Vorrang hat. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.es.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.es.xlf index aac33465eda7..b37669401bee 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.es.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.es.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + No se puede usar el perfil de inicio ''{0}'' porque no se pudo localizar el archivo de configuración de inicio. Ubicaciones probadas: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Advertencia: la configuración de '{0}' no se utiliza porque '{1}' tiene prioridad. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.fr.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.fr.xlf index 37db8eede2f2..9aec2dc7a325 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.fr.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.fr.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Désolé, nous ne pouvons pas utiliser le profil de lancement « {0} », car le fichier de paramètres de lancement est introuvable. Emplacements essayés : {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Avertissement : les paramètres de « {0} » ne sont pas utilisés, car « {1} » a la priorité. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.it.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.it.xlf index 59d52e5ed8b6..01eeb4affddc 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.it.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.it.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Non è possibile usare il profilo di avvio '{0}' perché il file delle impostazioni di avvio non è stato trovato. Posizioni tentate: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Avviso: le impostazioni di "{0}" non vengono usate perché "{1}" ha la precedenza. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ja.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ja.xlf index 03d8fb57849b..8158cac8e62a 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ja.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ja.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 起動設定ファイルが見つからないため、起動プロファイル '{0}' を使用できません。試行された場所: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 警告: '{1}' が優先されるため、'{0}' の設定は使用されません。 {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ko.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ko.xlf index e8f5349a61f3..fcd5aaf21f58 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ko.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ko.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 시작 설정 파일을 찾을 수 없으므로 시작 프로필 '{0}'을(를) 사용할 수 없습니다. 시도한 위치: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 경고: '{0}'의 설정은 '{1}'이(가) 우선하므로 사용되지 않습니다. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pl.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pl.xlf index fd5dd04c8e3b..0ade7497c60e 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pl.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pl.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Nie można użyć profilu uruchamiania „{0}”, ponieważ nie można zlokalizować pliku ustawień uruchamiania. Wypróbowano lokalizacje: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Ostrzeżenie: ustawienia z „{0}” nie są używane, ponieważ element „{1}” ma pierwszeństwo. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pt-BR.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pt-BR.xlf index cf75b96d20cb..384ef0200832 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pt-BR.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.pt-BR.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Não é possível usar o perfil de inicialização ''{0}'' porque o arquivo de configurações de inicialização não pôde ser localizado. Localizações tentadas: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Aviso: As configurações de '{0}' não são utilizadas porque '{1}' tem precedência. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ru.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ru.xlf index e785452d408c..f673a5927433 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ru.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.ru.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Не удается использовать профиль запуска "{0}", так как не удалось найти файл параметров запуска. Попробованные расположения: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Внимание! Параметры из "{0}" не используются, так как "{1}" обладает приоритетом. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.tr.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.tr.xlf index b535535503ac..846bf698c4c2 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.tr.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.tr.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Başlatma ayarları dosyası bulunamadığı için ‘{0}’ başlatma profilini kullanılamıyor. Denenen konumlar: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Uyarı: ‘{1}’ öncelikli olduğu için ‘{0}’ ayarları kullanılmaz. {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hans.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hans.xlf index 498ecf30dc47..098319894796 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hans.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hans.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 无法使用启动配置文件“{0}”，因为找不到启动设置文件。已尝试的位置: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 警告: 不使用 ‘{0}’ 中的设置，因为 ‘{1}’ 具有优先级。 {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hant.xlf b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hant.xlf index 5d1edadd8e3f..a4b24d3eb400 100644 --- a/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hant.xlf +++ b/src/Cli/Microsoft.DotNet.Cli.CommandLine/xlf/CliResources.zh-Hant.xlf @@ -5,13 +5,13 @@ Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 無法使用啟動設定檔 '{0}'，因為找不到啟動設定檔案。嘗試的位置: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 警告: 來自 '{0}' 的設定未被使用，因為 '{1}' 具有優先順序。 {0} is an app.run.json file path. {1} is a launchSettings.json file path. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.cs.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.cs.xlf index e2ff54b63ea7..37292a467a31 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.cs.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.cs.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Nelze určit cestu k dočasnému adresáři. Zvažte konfiguraci proměnné prostředí TEMP v systému Windows nebo místní datové složky aplikace v systému Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.de.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.de.xlf index 35ea65672d5f..991dcca846e4 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.de.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.de.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Ein temporärer Verzeichnispfad kann nicht ermittelt werden. Erwägen Sie, die TEMP-Umgebungsvariable unter Windows oder den lokalen App-Datenordner unter Unix zu konfigurieren. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.es.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.es.xlf index 52838d81d438..2983aa595df6 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.es.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.es.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + No se puede determinar una ruta de acceso temporal al directorio. Considere la posibilidad de configurar la variable de entorno TEMP en Windows o la carpeta de datos de la aplicación local en Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.fr.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.fr.xlf index c72828f206e1..1fabce52be8a 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.fr.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.fr.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Impossible de déterminer un chemin d’accès pour le répertoire temporaire. Nous vous recommandons de configurer la variable d’environnement TEMP sous Windows ou le dossier des données d’application locale sous Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.it.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.it.xlf index 1ef99c9b7878..93fdb8209fd1 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.it.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.it.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Non è possibile determinare un percorso per la directory temporanea. Considerare la configurazione della variabile di ambiente TEMP in Windows o della cartella dei dati locali dell'app in Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ja.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ja.xlf index 9c3d5d6397c9..f76d2b528243 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ja.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ja.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + 一時ディレクトリ パスを特定できません。Windows で TEMP 環境変数を構成するか、Unix でローカル アプリ データ フォルダーを構成することを検討してください。 diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ko.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ko.xlf index 5fec6b68dc06..afdd17c8f433 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ko.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ko.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + 임시 디렉터리 경로를 확인할 수 없습니다. Windows에서는 TEMP 환경 변수를, Unix에서는 로컬 앱 데이터 폴더를 설정하는 것이 좋습니다. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pl.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pl.xlf index 6a095b940a51..5e91ebbb30cf 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pl.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pl.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Nie można określić tymczasowej ścieżki katalogu. Rozważ skonfigurowanie zmiennej środowiskowej TEMP w systemie Windows lub folderze danych aplikacji lokalnej w systemie Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pt-BR.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pt-BR.xlf index bc90e2b2187d..f44fda05d927 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pt-BR.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.pt-BR.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Não é possível determinar um caminho de diretório temporário. Considere configurar a variável de ambiente TEMP no Windows ou a pasta de dados do aplicativo local no Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ru.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ru.xlf index 2cce6fdb2ccf..5e9af0ed594f 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ru.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.ru.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Не удалось определить путь к временному каталогу. Рассмотрите возможность настроить переменную среды TEMP в Windows или папку локальных данных приложений в Unix. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.tr.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.tr.xlf index 83009813c12b..93c4d39ae84d 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.tr.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.tr.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + Geçici dizin yolu saptanamıyor. Windows'da TEMP ortam değişkenini veya Unix'te yerel uygulama verileri klasörünü yapılandırmayı göz önünde bulundurun. diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hans.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hans.xlf index 1a31fe1a755c..27b469f6394b 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hans.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hans.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + 无法确定临时目录路径。请考虑在 Windows 上配置 TEMP 环境变量，或在 Unix 上配置本地应用数据文件夹。 diff --git a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hant.xlf b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hant.xlf index d2b441fee0d5..f5a7d9f89eea 100644 --- a/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hant.xlf +++ b/src/Cli/Microsoft.DotNet.FileBasedPrograms/xlf/FileBasedProgramsResources.zh-Hant.xlf @@ -1,4 +1,4 @@ - + @@ -29,7 +29,7 @@ Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. - Unable to determine a temporary directory path. Consider configuring the TEMP environment variable on Windows or local app data folder on Unix. + 無法判斷暫存 目錄路徑。考慮在 Windows 上或 Unix 上的本機應用程式資料資料資料夾上設定 TEMP 環境變數。 diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.cs.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.cs.xlf index 293774c36807..503732e378bc 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.cs.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.cs.xlf @@ -725,17 +725,17 @@ Jedná se o ekvivalent odstranění project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Definuje cestu souboru projektu, který se má spustit. Použijte cestu k souboru projektu nebo cestu k adresáři obsahujícímu soubor projektu. Pokud se nezadá, použije se výchozí nastavení aktuálního adresáře. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Definuje cestu k projektu nebo souboru řešení, který se má otestovat. Použijte cestu k souboru projektu nebo cestu k adresáři obsahujícímu soubor projektu. Pokud se nezadá, použije se výchozí nastavení aktuálního adresáře. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Pokud zadaný adresář neexistuje, bude vytvořen. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Definuje cestu k souboru řešení, který se má otestovat. Použijte cestu k souboru řešení nebo cestu k adresáři, který obsahuje soubor řešení. Pokud se nezadá, použije se výchozí nastavení aktuálního adresáře. @@ -2373,7 +2373,7 @@ Nástroj {1} (verze {2}) se úspěšně nainstaloval. Do souboru manifestu {3} s Specify the output directory (press Enter for default: '{0}', directory must not exist): - Zadejte výstupní adresář ({0}): + Zadejte výstupní adresář (stisknutím klávesy Enter použijete výchozí hodnotu: {0}, adresář nesmí existovat): {0} is the default value @@ -2620,7 +2620,7 @@ Ve výchozím nastavení je publikována aplikace závislá na architektuře. Available target frameworks: - Available target frameworks: + Dostupné cílové architektury: @@ -2635,7 +2635,7 @@ Ve výchozím nastavení je publikována aplikace závislá na architektuře. Example - Example + Příklad @@ -2687,7 +2687,7 @@ Cílem projektu je více architektur. Pomocí parametru {0} určete, která arch Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Posunutím nahoru a dolů zobrazíte další architektury. @@ -2697,12 +2697,12 @@ Cílem projektu je více architektur. Pomocí parametru {0} určete, která arch Type to search - Type to search + Zadejte hledaný text Select the target framework to run: - Select the target framework to run: + Vyberte cílovou architekturu, která se má spustit: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.de.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.de.xlf index bf4889f2658d..af62e25ca722 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.de.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.de.xlf @@ -355,11 +355,11 @@ Wird ein Absturz erkannt, wird in "TestResults/guid/guid_Sequence.xml" eine Sequ Basierend auf den zusätzlichen Einstellungen kann auch ein Blockade- oder Absturzabbild erfasst werden. -Beispiel: +Beispiel: Es wird ein Timeout für die Testausführung ausgelöst, wenn der Test länger als 1 Stunde (Standardtimeout) dauert, und es wird ein Absturzabbild erfasst, wenn der Testhost unerwartet beendet wird. (Für Absturzabbilder ist eine zusätzlicher Setup erforderlich, siehe unten.) dotnet test --blame-hang --blame-crash -Beispiel: +Beispiel: Es wird ein Timeout für die Testausführung ausgelöst, wenn der Test mehr als 20 Minuten dauert, und es wird ein Blockadeabbild erfasst. dotnet test --blame-hang-timeout 20min @@ -725,17 +725,17 @@ Dies entspricht dem Löschen von "project.assets.json". Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Definiert den Pfad der auszuführenden Projektdatei. Verwenden Sie den Pfad zur Projektdatei oder den Pfad zu dem Verzeichnis, das die Projektdatei enthält. Wenn keine Angabe erfolgt, wird standardmäßig das aktuelle Verzeichnis verwendet. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Definiert den Pfad des zu testenden Projekts oder der zu testenden Projektmappendatei. Verwenden Sie den Pfad zur Projektdatei oder den Pfad zu dem Verzeichnis, das die Projektdatei enthält. Wenn keine Angabe erfolgt, wird standardmäßig das aktuelle Verzeichnis verwendet. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Das angegebene Verzeichnis wird erstellt, wenn es nicht vorhanden ist. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Definiert den Pfad der zu testenden Projektmappendatei. Verwenden Sie den Pfad zur Projektmappendatei oder den Pfad zu dem Verzeichnis, das die Projektmappendatei enthält. Wenn keine Angabe erfolgt, wird standardmäßig das aktuelle Verzeichnis verwendet. @@ -2267,11 +2267,11 @@ Das Tool "{1}" (Version {2}) wurde erfolgreich installiert. Der Eintrag wird der „dotnet workload search version“ hat je nach Argument drei Funktionen: 1. Wird kein Argument angegeben, dann wird eine Liste der zuletzt veröffentlichten Workloadversionen aus diesem Featureband ausgegeben. Akzeptiert die Option „--take“, um anzugeben, wie viele angegeben werden sollen, und „--format“, um das Format zu ändern. - Beispiel: + Beispiel: dotnet workload search version --take 2 --format json [{"workloadVersion":"9.0.201"},{"workloadVersion":"9.0.200.1"}] 2. Wenn eine Workloadversion als Argument angegeben wird, dann werden eine Tabelle mit verschiedenen Workloads und deren Versionen für die angegebene Workloadversion ausgegeben. Akzeptiert die Option „--format“, um das Ausgabeformat zu ändern. - Beispiel: + Beispiel: dotnet workload search version 9.0.201 Workloadmanifest-ID Manifest-Featureband Manifestversion ------------------------------------------------------------------------------------------------ @@ -2290,7 +2290,7 @@ Das Tool "{1}" (Version {2}) wurde erfolgreich installiert. Der Eintrag wird der microsoft.net.workload.mono.toolchain.net7 9.0.100-rc.1 9.0.0-rc.1.24431.7 microsoft.net.workload.mono.toolchain.net8 9.0.100-rc.1 9.0.0-rc.1.24431.7 3. Wenn eine oder mehrere Workloads zusammen mit ihren Versionen bereitgestellt werden (indem sie mit dem @-Zeichen verbunden werden), werden die Workloadversionen, die mit den angegebenen Versionen übereinstimmen, ausgegebenen. Akzeptiert die Option „--take“, um anzugeben, wie viele angegeben werden sollen, und „--format“, um das Format zu ändern. - Beispiel: + Beispiel: dotnet workload search version maui@9.0.0-rc.1.24453.9 ios@17.5.9270-net9-rc1 9.0.201 @@ -2373,7 +2373,7 @@ Das Tool "{1}" (Version {2}) wurde erfolgreich installiert. Der Eintrag wird der Specify the output directory (press Enter for default: '{0}', directory must not exist): - Ausgabeverzeichnis ({0}) angeben: + Geben Sie das Ausgabeverzeichnis an (drücken Sie die EINGABETASTE, um die Standardeinstellung zu verwenden: „{0}“, das Verzeichnis darf nicht vorhanden sein): {0} is the default value @@ -2620,7 +2620,7 @@ Standardmäßig wird eine Framework-abhängige Anwendung veröffentlicht. Available target frameworks: - Available target frameworks: + Verfügbare Zielframeworks: @@ -2635,7 +2635,7 @@ Standardmäßig wird eine Framework-abhängige Anwendung veröffentlicht. Example - Example + Beispiel @@ -2687,7 +2687,7 @@ Ihr Projekt verwendet mehrere Zielframeworks. Geben Sie über "{0}" an, welches Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Nach oben und unten bewegen, um weitere Frameworks anzuzeigen @@ -2697,12 +2697,12 @@ Ihr Projekt verwendet mehrere Zielframeworks. Geben Sie über "{0}" an, welches Type to search - Type to search + Zum Suchen eingeben Select the target framework to run: - Select the target framework to run: + Wählen Sie das auszuführende Zielframework aus: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.es.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.es.xlf index 529999c31c77..9573e17cf5e3 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.es.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.es.xlf @@ -725,17 +725,17 @@ Esta acción es equivalente a eliminar project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Defina la ruta de acceso del archivo de proyecto que se va a ejecutar. Use la ruta de acceso al archivo de proyecto o la ruta de acceso al directorio que contiene el archivo de proyecto. Si no se especifica, el valor predeterminado es el directorio actual. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Defina la ruta de acceso del proyecto o archivo de solución que se va a probar. Use la ruta de acceso al archivo de proyecto o la ruta de acceso al directorio que contiene el archivo de proyecto. Si no se especifica, el valor predeterminado es el directorio actual. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Si no existe, se creará el directorio especificado. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Defina la ruta de acceso del archivo de solución que se va a probar. Use la ruta de acceso al archivo de solución o la ruta de acceso al directorio que contiene el archivo de solución. Si no se especifica, el valor predeterminado es el directorio actual. @@ -2373,7 +2373,7 @@ La herramienta "{1}" (versión "{2}") se instaló correctamente. Se ha agregado Specify the output directory (press Enter for default: '{0}', directory must not exist): - Especifique el directorio de salida ({0}): + Especifique el directorio de salida (presione Entrar para el valor predeterminado: ''{0}, el directorio no debe existir): {0} is the default value @@ -2620,7 +2620,7 @@ El valor predeterminado es publicar una aplicación dependiente del marco. Available target frameworks: - Available target frameworks: + Plataformas de destino disponibles: @@ -2635,7 +2635,7 @@ El valor predeterminado es publicar una aplicación dependiente del marco. Example - Example + Ejemplo @@ -2653,7 +2653,7 @@ El valor predeterminado es publicar una aplicación dependiente del marco. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - No se puede usar el perfil de inicio '{0}' porque no se pudo localizar el archivo de configuración de inicio. Ubicaciones probadas: + No se puede usar el perfil de inicio '{0}' porque no se pudo localizar el archivo de configuración de inicio. Ubicaciones probadas: {1} @@ -2687,7 +2687,7 @@ Su proyecto tiene como destino varias plataformas. Especifique la que quiere usa Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Subir y bajar para mostrar más marcos @@ -2697,12 +2697,12 @@ Su proyecto tiene como destino varias plataformas. Especifique la que quiere usa Type to search - Type to search + Escriba para buscar Select the target framework to run: - Select the target framework to run: + Seleccione la plataforma de destino que se va a ejecutar: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.fr.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.fr.xlf index d70736f22461..6d24f499f375 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.fr.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.fr.xlf @@ -725,17 +725,17 @@ Cela équivaut à supprimer project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Définit le chemin d’accès du fichier de projet à exécuter. Utiliser le chemin du fichier projet ou celui du répertoire contenant ce fichier. Si rien n’est spécifié, la valeur par défaut est le répertoire actif. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Définit le chemin d’accès du projet ou du fichier solution à tester. Utiliser le chemin du fichier projet ou celui du répertoire contenant ce fichier. Si rien n’est spécifié, la valeur par défaut est le répertoire actif. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Le répertoire spécifié est créé, s'il n'existe pas déjà. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Définit le chemin d’accès du fichier solution à tester. Utiliser le chemin du fichier solution ou celui du répertoire contenant ce fichier. Si rien n’est spécifié, la valeur par défaut est le répertoire actif. @@ -2373,7 +2373,7 @@ L'outil '{1}' (version '{2}') a été correctement installé. L'entrée est ajou Specify the output directory (press Enter for default: '{0}', directory must not exist): - Spécifiez le répertoire de sortie ({0}) : + Spécifiez le répertoire de sortie (appuyez sur Entrée pour utiliser la valeur par défaut : « {0} », le répertoire ne doit pas exister) : {0} is the default value @@ -2620,7 +2620,7 @@ La valeur par défaut est de publier une application dépendante du framework. Available target frameworks: - Available target frameworks: + Frameworks cibles disponibles : @@ -2635,7 +2635,7 @@ La valeur par défaut est de publier une application dépendante du framework. Example - Example + Exemple @@ -2653,7 +2653,7 @@ La valeur par défaut est de publier une application dépendante du framework. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Impossible d’utiliser le profil de lancement « {0} », car le fichier de paramètres de lancement est introuvable. Emplacements essayés : + Impossible d’utiliser le profil de lancement « {0} », car le fichier de paramètres de lancement est introuvable. Emplacements essayés : {1} @@ -2687,7 +2687,7 @@ Votre projet cible plusieurs frameworks. Spécifiez le framework à exécuter à Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Montez et descendez pour afficher plus de frameworks @@ -2697,12 +2697,12 @@ Votre projet cible plusieurs frameworks. Spécifiez le framework à exécuter à Type to search - Type to search + Entrer le texte à rechercher Select the target framework to run: - Select the target framework to run: + Sélectionner le framework cible pour exécuter : diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.it.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.it.xlf index 3b51ca4b1030..b987f98f8c6e 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.it.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.it.xlf @@ -725,17 +725,17 @@ Equivale a eliminare project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Definisce il percorso del file progetto da eseguire. Usare il percorso del file progetto o della directory che contiene il file progetto. Se non specificato, per impostazione predefinita viene usata la directory corrente. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Definisce il percorso del file progetto o soluzione da testare. Usare il percorso del file progetto o della directory che contiene il file progetto. Se non specificato, per impostazione predefinita viene usata la directory corrente. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Se non esiste, la directory specificata verrà creata. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Definisce il percorso del file soluzione da testare. Usare il percorso del file soluzione o della directory che contiene il file soluzione. Se non specificato, per impostazione predefinita viene usata la directory corrente. @@ -2373,7 +2373,7 @@ Lo strumento '{1}' versione '{2}' è stato installato. La voce è stata aggiunta Specify the output directory (press Enter for default: '{0}', directory must not exist): - Specifica la directory di output ({0}): + Specificare la directory di output (premere INVIO per impostazione predefinita: '{0}', la directory non deve esistere): {0} is the default value @@ -2620,7 +2620,7 @@ Per impostazione predefinita, viene generato un pacchetto dipendente dal framewo Available target frameworks: - Available target frameworks: + Framework di destinazione disponibili: @@ -2635,7 +2635,7 @@ Per impostazione predefinita, viene generato un pacchetto dipendente dal framewo Example - Example + Esempio @@ -2653,7 +2653,7 @@ Per impostazione predefinita, viene generato un pacchetto dipendente dal framewo Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Non è possibile usare il profilo di avvio "{0}" perché il file delle impostazioni di avvio non è stato trovato. Posizioni tentate: + Non è possibile usare il profilo di avvio "{0}" perché il file delle impostazioni di avvio non è stato trovato. Posizioni tentate: {1} @@ -2687,7 +2687,7 @@ Il progetto è destinato a più framework. Specificare il framework da eseguire Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Spostarsi verso l'alto o verso il basso per visualizzare altri framework @@ -2697,12 +2697,12 @@ Il progetto è destinato a più framework. Specificare il framework da eseguire Type to search - Type to search + Digita per cercare Select the target framework to run: - Select the target framework to run: + Selezionare il framework di destinazione da eseguire: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ja.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ja.xlf index c836504745c1..3ef1341b3379 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ja.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ja.xlf @@ -725,17 +725,17 @@ This is equivalent to deleting project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 実行するプロジェクト ファイルのパスを定義します。プロジェクト ファイルへのパス、またはプロジェクト ファイルを含むディレクトリへのパスを使用します。指定しない場合は、既定で現在のディレクトリに設定されます。 Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + テストするプロジェクト ファイルまたはソリューション ファイルのパスを定義します。プロジェクト ファイルへのパス、またはプロジェクト ファイルを含むディレクトリへのパスを使用します。指定しない場合は、既定で現在のディレクトリに設定されます。 PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ The specified directory will be created if it does not exist. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + テストするソリューション ファイルのパスを定義します。ソリューション ファイルへのパス、またはソリューション ファイルを含むディレクトリへのパスを使用します。指定しない場合は、既定で現在のディレクトリに設定されます。 @@ -2290,7 +2290,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man microsoft.net.workload.mono.toolchain.net7 9.0.100-rc.1 9.0.0-rc.1.24431.7 microsoft.net.workload.mono.toolchain.net8 9.0.100-rc.1 9.0.0-rc.1.24431.7 3. 1 つ以上のワークロードをバージョンと共に ('@' 文字で結合して) 指定すると、指定されたバージョンに一致するワークロード バージョンが出力されます。--take オプションを指定して提供する数を指定し、--format を指定して形式を変更します。 - 例: + 例: dotnet workload search version maui@9.0.0-rc.1.24453.9 ios@17.5.9270-net9-rc1 9.0.201 @@ -2373,7 +2373,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man Specify the output directory (press Enter for default: '{0}', directory must not exist): - 出力ディレクトリ ({0}) を指定します: + 出力ディレクトリを指定します (Enter キーを押すと既定値に設定されます: '{0}'、ディレクトリは存在してはなりません): {0} is the default value @@ -2620,7 +2620,7 @@ The default is to publish a framework-dependent application. Available target frameworks: - Available target frameworks: + 使用可能なターゲット フレームワーク: @@ -2635,7 +2635,7 @@ The default is to publish a framework-dependent application. Example - Example + 例 @@ -2653,7 +2653,7 @@ The default is to publish a framework-dependent application. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - 起動設定ファイルが見つからないため、起動プロファイル '{0}' を使用できません。試行された場所: + 起動設定ファイルが見つからないため、起動プロファイル '{0}' を使用できません。試行された場所: {1} @@ -2687,7 +2687,7 @@ Your project targets multiple frameworks. Specify which framework to run using ' Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + 上下に移動して、さらに多くのフレームワークを表示 @@ -2697,12 +2697,12 @@ Your project targets multiple frameworks. Specify which framework to run using ' Type to search - Type to search + 入力して検索します Select the target framework to run: - Select the target framework to run: + 実行するターゲット フレームワークを選択してください: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ko.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ko.xlf index c33addce7195..2bab7de74eb5 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ko.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ko.xlf @@ -355,11 +355,11 @@ Example: 추가 설정에 따라 중단 덤프 또는 크래시 덤프가 수집될 수도 있습니다. -예: +예: 테스트에 걸리는 시간이 기본 시간 제한인 1시간보다 길면 테스트 실행이 시간 초과되고, 테스트 호스트가 예기치 않게 종료되면 크래시 덤프를 수집합니다. (크래시 덤프에는 추가 설정이 필요합니다. 아래를 참조하세요.) dotnet test --blame-hang --blame-crash -예: +예: 테스트에 걸리는 시간이 20분보다 길면 테스트 실행이 시간 초과되고 중단 덤프를 수집합니다. dotnet test --blame-hang-timeout 20min @@ -725,17 +725,17 @@ project.assets.json을 삭제하는 것과 동일합니다. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 실행할 프로젝트 파일의 경로를 정의합니다. 프로젝트 파일의 경로 또는 프로젝트 파일이 포함된 디렉터리의 경로를 사용합니다. 지정하지 않으면 기본적으로 현재 디렉터리가 사용됩니다. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 테스트할 프로젝트 또는 솔루션 파일의 경로를 정의합니다. 프로젝트 파일의 경로 또는 프로젝트 파일이 포함된 디렉터리의 경로를 사용합니다. 지정하지 않으면 기본적으로 현재 디렉터리가 사용됩니다. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ The specified directory will be created if it does not exist. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + 테스트할 솔루션 파일의 경로를 정의합니다. 솔루션 파일의 경로 또는 솔루션 파일이 포함된 디렉터리의 경로를 사용합니다. 지정하지 않으면 기본적으로 현재 디렉터리가 사용됩니다. @@ -2271,7 +2271,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man dotnet workload search version --take 2 --format json [{"workloadVersion":"9.0.201"},{"workloadVersion":"9.0.200.1"}] 2. 특정 워크로드 버전이 인수로 제공되는 경우 지정된 워크로드 버전에 대한 다양한 워크로드 및 해당 버전의 테이블을 출력합니다. --format 옵션을 사용하여 출력 형식을 변경합니다. - 예: + 예: dotnet workload search version 9.0.201 워크로드 매니페스트 ID 매니페스트 기능 밴드 매니페스트 버전 ------------------------------------------------------------------------------------------------ @@ -2290,7 +2290,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man microsoft.net.workload.mono.toolchain.net7 9.0.100-rc.1 9.0.0-rc.1.24431.7 microsoft.net.workload.mono.toolchain.net8 9.0.100-rc.1 9.0.0-rc.1.24431.7 3. 하나 이상의 워크로드가 해당 버전과 함께 제공되는 경우('@' 문자와 조인하여) 제공된 버전과 일치하는 워크로드 버전을 출력합니다. --take 옵션을 사용하여 얼마나 제공할지 지정하고 --format을 사용하여 형식을 변경합니다. - 예: + 예: dotnet workload search version maui@9.0.0-rc.1.24453.9 ios@17.5.9270-net9-rc1 9.0.201 @@ -2373,7 +2373,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man Specify the output directory (press Enter for default: '{0}', directory must not exist): - 출력 디렉터리 지정({0}): + 출력 디렉터리를 지정합니다(Enter 키를 누르면 '{0}' 기본값 사용, 기존 디렉터리가 없어야 함). {0} is the default value @@ -2620,7 +2620,7 @@ The default is to publish a framework-dependent application. Available target frameworks: - Available target frameworks: + 사용 가능한 대상 프레임워크: @@ -2635,7 +2635,7 @@ The default is to publish a framework-dependent application. Example - Example + 예제 @@ -2653,7 +2653,7 @@ The default is to publish a framework-dependent application. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - 시작 설정 파일을 찾을 수 없으므로 시작 프로필 '{0}'을(를) 사용할 수 없습니다. 시도한 위치: + 시작 설정 파일을 찾을 수 없으므로 시작 프로필 '{0}'을(를) 사용할 수 없습니다. 시도한 위치: {1} @@ -2687,7 +2687,7 @@ Your project targets multiple frameworks. Specify which framework to run using ' Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + 더 많은 프레임워크를 보려면 위아래로 이동하세요. @@ -2697,12 +2697,12 @@ Your project targets multiple frameworks. Specify which framework to run using ' Type to search - Type to search + 검색할 형식 Select the target framework to run: - Select the target framework to run: + 실행할 대상 프레임워크 선택: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pl.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pl.xlf index f89492285068..7b6cecaeb80b 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pl.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pl.xlf @@ -725,17 +725,17 @@ Jest to równoważne usunięciu pliku project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Określa ścieżkę do pliku projektu do uruchomienia. Użyj ścieżki do pliku projektu lub katalogu, w którym ten plik się znajduje. Jeśli nie zostanie określony, domyślnie będzie to bieżący katalog. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Określa ścieżkę do pliku projektu lub rozwiązania do przetestowania. Użyj ścieżki do pliku projektu lub katalogu, w którym ten plik się znajduje. Jeśli nie zostanie określony, domyślnie będzie to bieżący katalog. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Jeśli określony katalog nie istnieje, zostanie utworzony. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Określa ścieżkę do pliku rozwiązania do przetestowania. Użyj ścieżki do pliku rozwiązania lub katalogu, w którym ten plik się znajduje. Jeśli nie zostanie określony, domyślnie będzie to bieżący katalog. @@ -2373,7 +2373,7 @@ Narzędzie „{1}” (wersja „{2}”) zostało pomyślnie zainstalowane. Wpis Specify the output directory (press Enter for default: '{0}', directory must not exist): - Określ katalog wyjściowy ({0}): + Określ katalog wyjściowy (naciśnij Enter, aby użyć wartości domyślnej: „{0}”, katalog nie może istnieć): {0} is the default value @@ -2620,7 +2620,7 @@ Domyślnie publikowana jest aplikacja zależna od struktury. Available target frameworks: - Available target frameworks: + Dostępne docelowe struktury: @@ -2635,7 +2635,7 @@ Domyślnie publikowana jest aplikacja zależna od struktury. Example - Example + Przykład @@ -2687,7 +2687,7 @@ Projekt ma wiele platform docelowych. Określ platformę do uruchomienia przy u Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Przesuń w górę lub w dół, aby zobaczyć więcej struktur @@ -2697,12 +2697,12 @@ Projekt ma wiele platform docelowych. Określ platformę do uruchomienia przy u Type to search - Type to search + Wpisz, aby wyszukać Select the target framework to run: - Select the target framework to run: + Wybierz docelową strukturę do uruchomienia: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pt-BR.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pt-BR.xlf index 81287d03948f..a626a828598e 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pt-BR.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.pt-BR.xlf @@ -725,17 +725,17 @@ Isso equivale a excluir o project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Define o caminho do arquivo de projeto a ser executado. Usar o caminho do arquivo de projeto ou o caminho do diretório que contém o arquivo de projeto. Se não for especificado, o padrão será o diretório atual. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Define o caminho do arquivo de projeto ou de solução a ser testado. Usar o caminho do arquivo de projeto ou o caminho do diretório que contém o arquivo de projeto. Se não for especificado, o padrão será o diretório atual. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + CAMINHO_DO_PROJETO_OU_SOLUÇÃO @@ -782,7 +782,7 @@ O diretório especificado será criado se ele ainda não existir. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Define o caminho do arquivo de solução a ser testado. Usar o caminho do arquivo de solução ou o caminho do diretório que contém o arquivo de solução. Se não for especificado, o padrão será o diretório atual. @@ -2373,7 +2373,7 @@ A ferramenta '{1}' (versão '{2}') foi instalada com êxito. A entrada foi adici Specify the output directory (press Enter for default: '{0}', directory must not exist): - Especificar o diretório de saída ({0}): + Especifique o diretório de saída (pressione Enter para o padrão: '{0}', o diretório não deve existir): {0} is the default value @@ -2620,7 +2620,7 @@ O padrão é publicar uma aplicação dependente de framework. Available target frameworks: - Available target frameworks: + Estruturas de destino disponíveis: @@ -2635,7 +2635,7 @@ O padrão é publicar uma aplicação dependente de framework. Example - Example + Exemplo @@ -2687,7 +2687,7 @@ Ele tem diversas estruturas como destino. Especifique que estrutura executar usa Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Mover para cima e para baixo para ver mais estruturas @@ -2697,12 +2697,12 @@ Ele tem diversas estruturas como destino. Especifique que estrutura executar usa Type to search - Type to search + Digite para pesquisar Select the target framework to run: - Select the target framework to run: + Selecione a estrutura de destino para executar: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ru.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ru.xlf index 52e2408c6370..85273bc1b688 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ru.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.ru.xlf @@ -725,17 +725,17 @@ This is equivalent to deleting project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Определяет путь к файлу проекта для запуска. Используйте путь к файлу проекта или каталогу, содержащему файл проекта. Если не указано, по умолчанию используется текущий каталог. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Определяет путь к файлу проекта или решения для тестирования. Используйте путь к файлу проекта или каталогу, содержащему файл проекта. Если не указано, по умолчанию используется текущий каталог. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ The specified directory will be created if it does not exist. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Определяет путь к файлу решения для тестирования. Используйте путь к файлу решения или каталогу, содержащему файл решения. Если не указано, по умолчанию используется текущий каталог. @@ -2373,7 +2373,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man Specify the output directory (press Enter for default: '{0}', directory must not exist): - Укажите выходной каталог ({0}): + Укажите выходной каталог (нажмите клавишу ВВОД для значения по умолчанию: "{0}", каталог не должен существовать): {0} is the default value @@ -2620,7 +2620,7 @@ The default is to publish a framework-dependent application. Available target frameworks: - Available target frameworks: + Доступные целевые платформы: @@ -2635,7 +2635,7 @@ The default is to publish a framework-dependent application. Example - Example + Пример @@ -2687,7 +2687,7 @@ Your project targets multiple frameworks. Specify which framework to run using ' Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Прокрутите вверх и вниз, чтобы увидеть больше платформ @@ -2697,12 +2697,12 @@ Your project targets multiple frameworks. Specify which framework to run using ' Type to search - Type to search + Введите текст для поиска Select the target framework to run: - Select the target framework to run: + Выберите целевую платформу для запуска: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.tr.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.tr.xlf index 0bdf46014f3c..aaafe7633293 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.tr.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.tr.xlf @@ -725,17 +725,17 @@ project.assets.json öğesini silmeyle eşdeğerdir. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Çalıştırılacak proje dosyasının yolunu tanımlar. Proje dosyasının yolunu veya proje dosyasını içeren dizinin yolunu kullanın. Belirtilmezse, varsayılan olarak geçerli dizine ayarlar. Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + Test edilecek proje veya çözüm dosyasının yolunu tanımlar. Proje dosyasının yolunu veya proje dosyasını içeren dizinin yolunu kullanın. Belirtilmezse, varsayılan olarak geçerli dizine ayarlar. PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ Belirtilen dizin yoksa oluşturulur. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + Test edilecek çözüm dosyasının yolunu tanımlar. Çözüm dosyasının yolunu veya çözüm dosyasını içeren dizinin yolunu kullanın. Belirtilmezse, varsayılan olarak geçerli dizine ayarlar. @@ -2373,7 +2373,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man Specify the output directory (press Enter for default: '{0}', directory must not exist): - Çıkış dizinini belirtin ({0}): + Çıkış dizinini belirtin (varsayılan için Enter tuşuna basın: '{0}', dizin mevcut olmamalıdır): {0} is the default value @@ -2620,7 +2620,7 @@ Varsayılan durum, çerçeveye bağımlı bir uygulama yayımlamaktır. Available target frameworks: - Available target frameworks: + Mevcut hedef çerçeveler: @@ -2635,7 +2635,7 @@ Varsayılan durum, çerçeveye bağımlı bir uygulama yayımlamaktır. Example - Example + Örnek @@ -2687,7 +2687,7 @@ Projeniz birden fazla Framework'ü hedefliyor. '{0}' kullanarak hangi Framework' Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + Yukarı ve aşağı hareket ederek daha fazla çerçeve görüntüleyin @@ -2697,12 +2697,12 @@ Projeniz birden fazla Framework'ü hedefliyor. '{0}' kullanarak hangi Framework' Type to search - Type to search + Aramak için yazın Select the target framework to run: - Select the target framework to run: + Çalıştırmak için hedef çerçeveyi seçin: @@ -3452,9 +3452,9 @@ and the corresponding package Ids for installed tools using the command 'dotnet tool list'. '{0}' paket kimliğine sahip araç bulunamadı. -Araçlar, aracı çağırırken kullandığınız araç adından farklı olabilen -paket kimlikleri kullanılarak kaldırılır. Yüklü araçların araç adlarını ve -karşılık gelen paket kimliklerini bulmak için +Araçlar, aracı çağırırken kullandığınız araç adından farklı olabilen +paket kimlikleri kullanılarak kaldırılır. Yüklü araçların araç adlarını ve +karşılık gelen paket kimliklerini bulmak için 'dotnet tool list' komutunu kullanabilirsiniz. diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hans.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hans.xlf index 196eb2de4133..0df738f393bf 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hans.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hans.xlf @@ -725,17 +725,17 @@ This is equivalent to deleting project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 定义要运行的项目文件的路径。使用项目文件的路径或包含项目文件的目录的路径。如果未指定，则默认为当前目录。 Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 定义要测试的项目或解决方案文件的路径。使用项目文件的路径或包含项目文件的目录的路径。如果未指定，则默认为当前目录。 PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ The specified directory will be created if it does not exist. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + 定义要测试的解决方案文件的路径。使用解决方案文件的路径或包含解决方案文件的目录的路径。如果未指定，则默认为当前目录。 @@ -2373,7 +2373,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man Specify the output directory (press Enter for default: '{0}', directory must not exist): - 指定输出目录({0}): + 指定输出目录(按 Enter 使用默认值: ‘{0}’，目录不得存在): {0} is the default value @@ -2620,7 +2620,7 @@ The default is to publish a framework-dependent application. Available target frameworks: - Available target frameworks: + 可用的目标框架: @@ -2635,7 +2635,7 @@ The default is to publish a framework-dependent application. Example - Example + 示例 @@ -2687,7 +2687,7 @@ Your project targets multiple frameworks. Specify which framework to run using ' Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + 上移或下移以显示更多框架 @@ -2697,12 +2697,12 @@ Your project targets multiple frameworks. Specify which framework to run using ' Type to search - Type to search + 键入以搜索 Select the target framework to run: - Select the target framework to run: + 选择要运行的目标框架: diff --git a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hant.xlf b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hant.xlf index a11d81925055..cb7f4356e0de 100644 --- a/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hant.xlf +++ b/src/Cli/dotnet/Commands/xlf/CliCommandStrings.zh-Hant.xlf @@ -355,11 +355,11 @@ Example: 根據其他設定，也可以收集擱置傾印或損毀傾印。 -範例: +範例: 當測試所花的時間超過預設的 1 小時時，測試執行會逾時，當測試主機未預期地結束時，會收集損毀傾印。 (損毀傾印需要其他設定，請參閱下文。) dotnet 測試 --blame-hang --blame-crash -範例: +範例: 當測試需要超過 20 分鐘並收集擱置傾印時，測試執行會逾時。 dotnet 測試 --blame-hang-timeout 20min @@ -725,17 +725,17 @@ This is equivalent to deleting project.assets.json. Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project file to run. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 定義要執行的專案檔案的路徑。請使用專案檔案的路徑，或包含該專案檔案的目錄路徑。如果未指定，則預設為目前目錄。 Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. - Defines the path of the project or solution file to test. Use path to the project file, or path to the directory containing the project file. If not specified, it defaults to the current directory. + 定義要測試的專案或解決方案檔案的路徑。請使用專案檔案的路徑，或包含該專案檔案的目錄路徑。如果未指定，則預設為目前目錄。 PROJECT_OR_SOLUTION_PATH - PROJECT_OR_SOLUTION_PATH + PROJECT_OR_SOLUTION_PATH @@ -782,7 +782,7 @@ The specified directory will be created if it does not exist. Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. - Defines the path of the solution file to test. Use path to the solution file, or path to the directory containing the solution file. If not specified, it defaults to the current directory. + 定義要測試的解決方案檔案的路徑。請使用解決方案檔案的路徑，或包含該解決方案檔案的目錄路徑。如果未指定，則預設為目前目錄。 @@ -1196,7 +1196,7 @@ See https://aka.ms/dotnet-test/mtp for more information. The following exception occurred when running the test module with RunCommand '{0}' and RunArguments '{1}': {2} - 使用 RunCommand '{0}' 和 RunArguments '{1}' 執行測試模組時，發生以下例外狀況: + 使用 RunCommand '{0}' 和 RunArguments '{1}' 執行測試模組時，發生以下例外狀況: {2} {Locked="RunCommand"}{Locked="RunArguments"} @@ -2267,11 +2267,11 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man 根據其引數，'dotnet workload search version' 有三個函式: 1. 如果未指定引數，它會從此功能帶輸出最新發行工作負載版本的清單。使用 --take 選項來指定要提供多少個，以及使用 --format 來變更格式。 - 範例: + 範例: dotnet workload search version --take 2 --format json [{"workloadVersion":"9.0.201"},{"workloadVersion":"9.0.200.1"}] 2. 如果提供工作負載版本做為引數，它會針對指定的工作負載版本輸出各種工作負載及其版本的表格。使用 --format 選項來變更輸出格式。 - 範例: + 範例: dotnet workload search version 9.0.201 工作負載資訊清單識別碼 資訊清單功能帶 資訊清單版本 ------------------------------------------------------------------------------------------------ @@ -2290,7 +2290,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man microsoft.net.workload.mono.toolchain.net7 9.0.100-rc.1 9.0.0-rc.1.24431.7 microsoft.net.workload.mono.toolchain.net8 9.0.100-rc.1 9.0.0-rc.1.24431.7 3. 如果提供一或多個工作負載及其版本 (使用 '@' 字元聯結它們)，它會輸出符合所提供版本的工作負載版本。使用 --take 選項來指定要提供多少個，以及使用 --format 來變更格式。 - 範例: + 範例: dotnet workload search version maui@9.0.0-rc.1.24453.9 ios@17.5.9270-net9-rc1 9.0.201 @@ -2373,7 +2373,7 @@ Tool '{1}' (version '{2}') was successfully installed. Entry is added to the man Specify the output directory (press Enter for default: '{0}', directory must not exist): - 指定輸出目錄 ({0}): + 請指定輸出目錄 (按 Enter 鍵以使用預設值: '{0}'，目錄必須不存在): {0} is the default value @@ -2620,7 +2620,7 @@ The default is to publish a framework-dependent application. Available target frameworks: - Available target frameworks: + 可用的目標架構: @@ -2635,7 +2635,7 @@ The default is to publish a framework-dependent application. Example - Example + 範例 @@ -2653,7 +2653,7 @@ The default is to publish a framework-dependent application. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - 無法使用啟動設定檔 '{0}'，因為找不到啟動設定檔檔案。嘗試的位置: + 無法使用啟動設定檔 '{0}'，因為找不到啟動設定檔檔案。嘗試的位置: {1} @@ -2687,7 +2687,7 @@ Your project targets multiple frameworks. Specify which framework to run using ' Move up and down to reveal more frameworks - Move up and down to reveal more frameworks + 上下移動以顯示更多的架構 @@ -2697,12 +2697,12 @@ Your project targets multiple frameworks. Specify which framework to run using ' Type to search - Type to search + 要搜尋的類型 Select the target framework to run: - Select the target framework to run: + 選取要執行的目標架構: diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.cs.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.cs.xlf index c336c2caa5d5..6b4ff5bb55d0 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.cs.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.cs.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (výchozí) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Při čtení {0} došlo k chybě: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Existuje několik spouštěcích profilů s názvy rozlišujícími malá a velká písmena, což není povoleno: {0} -Make the profile names distinct. +Nastavte odlišné názvy profilů. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Profil spuštění s názvem {0} neexistuje. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Typ profilu spuštění {0} se nepodporuje. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Profil se zadaným názvem není platný objekt JSON. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + Vlastnost profiles v dokumentu nastavení spuštění není objektem JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + Cesta {0} zadaná v: {1} je neplatná. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Nelze použít profil spouštění {0}, protože soubor nastavení spouštění nebyl nalezen. Vyzkoušená umístění: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Upozornění: Nastavení z {0} nejsou použita, protože {1} má přednost. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Nenašel se použitelný profil spuštění. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.de.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.de.xlf index 3538d5d20aec..93d3cd733313 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.de.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.de.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Standard) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Beim Lesen von „{0}“ ist ein Fehler aufgetreten: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Es gibt mehrere Startprofile mit Namen, bei denen die Groß-/Kleinschreibung beachtet wird, was nicht zulässig ist: {0} -Make the profile names distinct. +Erstellen Sie eindeutige Profilnamen. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Es ist kein Startprofil mit dem Namen "{0}" vorhanden. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Der Startprofiltyp "{0}" wird nicht unterstützt. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Ein Profil mit dem angegebenen Namen ist kein gültiges JSON-Objekt. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + Die Eigenschaft "Profile" des Starteigenschaftendokuments ist kein JSON-Objekt. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + Der in „{1}“ angegebene Pfad „{0}“ ist ungültig. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Das Startprofil „{0}“ kann nicht verwendet werden, da die Datei mit den Starteinstellungen nicht gefunden wurde. Versuchte Standorte: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Warnung: Einstellungen von „{0}“ werden nicht verwendet, weil „{1}“ Vorrang hat. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Es wurde kein verwendbares Startprofil gefunden. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.es.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.es.xlf index f409f1481066..5e37b3de70aa 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.es.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.es.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Predeterminada) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Error al leer '{0}': {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Hay varios perfiles de inicio con nombres que distinguen mayúsculas de minúsculas, lo que no está permitido: {0} -Make the profile names distinct. +Defina nombres de perfiles distintos. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + No existe ningún perfil de inicio con el nombre "{0}". The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + No se admite el tipo de perfil de inicio "{0}". A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Un perfil con el nombre especificado no es un objeto JSON válido. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + La propiedad "profiles" del documento de configuración de inicio no es un objeto JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + La ruta de acceso '{0}' especificada en '{1}' no es válida. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + No se puede usar el perfil de inicio '{0}' porque no se pudo localizar el archivo de configuración de inicio. Ubicaciones probadas: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Advertencia: la configuración de '{0}' no se utiliza porque '{1}' tiene prioridad. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + No se ha podido encontrar un perfil de inicio que se pueda usar. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.fr.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.fr.xlf index af0c9d337ebf..6440e8fe7f38 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.fr.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.fr.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Par défaut) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Une erreur est survenue pendant la lecture de « {0} » : {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Il existe plusieurs profils de lancement avec des noms qui respectent la casse, ce qui n’est pas autorisé : {0} -Make the profile names distinct. +Faites en sorte que les noms de profil soient distincts. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Un profil de lancement avec le nom '{0}' n'existe pas. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Le type de profil de lancement '{0}' n'est pas pris en charge. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Un profil avec le nom spécifié n'est pas un objet JSON valide. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + La propriété 'profiles' du document de paramètres de lancement n'est pas un objet JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + Le chemin d’accès « {0} » spécifié dans « {1} » n’est pas valide. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Impossible d’utiliser le profil de lancement « {0} », car le fichier de paramètres de lancement est introuvable. Emplacements essayés : {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Avertissement : les paramètres de « {0} » ne sont pas utilisés, car « {1} » a la priorité. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Impossible de localiser un profil de lancement utilisable. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.it.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.it.xlf index 129c9df27274..37441888832a 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.it.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.it.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Predefinita) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Si è verificato un errore durante la lettura di "{0}": {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Esistono diversi profili di avvio con nomi con distinzione tra maiuscole e minuscole, che non sono consentiti: {0} -Make the profile names distinct. +Rendi distinti i nomi profilo. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Non esiste un profilo di avvio con il nome '{0}'. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Il tipo '{0}' del profilo di avvio non è supportato. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Un profilo con il nome specificato non è un oggetto JSON valido. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + La proprietà 'profiles' del documento delle impostazioni di avvio non è un oggetto JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + Il percorso '{0}' specificato in '{1}' non è valido. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Non è possibile usare il profilo di avvio '{0}' perché il file delle impostazioni di avvio non è stato trovato. Posizioni tentate: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Avviso: le impostazioni di "{0}" non vengono usate perché "{1}" ha la precedenza. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Non è stato trovato alcun profilo di avvio utilizzabile. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ja.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ja.xlf index 05e7fa1d39b8..7a932cd4791f 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ja.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ja.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (既定) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + '{0}' の読み取り中にエラーが発生しました: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + 大文字と小文字が区別される名前の起動プロファイルがいくつかありますが、これは許可されていません: {0} -Make the profile names distinct. +プロファイル名を区別できるようにしてください。 A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + '{0} ' という名前の起動プロファイルは存在しません。 The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + 起動プロファイルの種類 '{0}' はサポートされていません。 A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + 指定された名前のプロファイルは、有効な JSON オブジェクトではありません。 The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + 起動設定のドキュメントの 'profiles' プロパティが JSON オブジェクトではありません。 Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + '{1}' で指定されたパス '{0}' が無効です。 Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 起動設定ファイルが見つからないため、起動プロファイル '{0}' を使用できません。試行された場所: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 警告: '{1}' が優先されるため、'{0}' の設定は使用されません。 {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + 使用可能な起動プロファイルが見つかりませんでした。 diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ko.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ko.xlf index 7bc51a26dcd6..738033adb535 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ko.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ko.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (기본값) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + '{0}'을 읽는 동안 오류가 발생했습니다. {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + 대/소문자를 구분하는 이름을 가진 여러 시작 프로필이 있으며 이는 허용되지 않습니다. {0} -Make the profile names distinct. +고유한 프로필 이름을 사용하세요. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + 이름이 '{0}'인 시작 프로필이 없습니다. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + 시작 프로필 형식 '{0}'은(는) 지원되지 않습니다. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + 지정된 이름의 프로필은 유효한 JSON 개체가 아닙니다. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + 시작 설정 문서의 '프로필' 속성이 JSON 개체가 아닙니다. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + '{1}'에 지정된 경로 '{0}'이(가) 잘못되었습니다. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 시작 설정 파일을 찾을 수 없으므로 시작 프로필 '{0}'을(를) 사용할 수 없습니다. 시도한 위치: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 경고: '{0}'의 설정은 '{1}'이(가) 우선하므로 사용되지 않습니다. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + 사용할 수 있는 시작 프로필을 찾을 수 없습니다. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pl.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pl.xlf index 7e524550a5c8..cfd4a8d9cf5e 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pl.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pl.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Domyślne) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Napotkano błąd podczas odczytywania elementu „{0}”: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Istnieje kilka profilów uruchamiania z nazwami uwzględniającymi wielkość liter, co jest niedozwolone: {0} -Make the profile names distinct. +Rozróżnij nazwy profilów. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Profil uruchamiania o nazwie „{0}” nie istnieje. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Typ profilu uruchamiania „{0}” nie jest obsługiwany. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Profil o określonej nazwie nie jest prawidłowym obiektem JSON. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + Właściwość „profiles” dokumentu ustawień uruchamiania nie jest obiektem JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + Ścieżka „{0}” określona w „{1}” jest nieprawidłowa. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Nie można użyć profilu uruchamiania „{0}”, ponieważ nie można zlokalizować pliku ustawień uruchamiania. Wypróbowano lokalizacje: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Ostrzeżenie: ustawienia z „{0}” nie są używane, ponieważ element „{1}” ma pierwszeństwo. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Nie można odnaleźć nadającego się do użytku profilu uruchamiania. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pt-BR.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pt-BR.xlf index 2ff24ccb465b..68e6a06dfb3d 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pt-BR.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.pt-BR.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Padrão) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Ocorreu um erro ao ler '{0}': {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Existem vários perfis de inicialização com nomes que diferenciam maiúsculas de minúsculas, o que não é permitido: {0} -Make the profile names distinct. +Diferencie os nomes dos perfis. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Um perfil de lançamento com o nome '{0}' não existe. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Não há suporte para o tipo de perfil de inicialização '{0}'. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Um perfil com o nome especificado não é um objeto JSON válido. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + A propriedade 'perfis' do documento de configurações de inicialização não é um objeto JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + O caminho ''{0}'' especificado em ''{1}'' é inválido. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Não é possível usar o perfil de inicialização ''{0}'' porque o arquivo de configurações de inicialização não pôde ser localizado. Localizações tentadas: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Aviso: As configurações de '{0}' não são utilizadas porque '{1}' tem precedência. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Um perfil de inicialização utilizável não pôde ser localizado. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ru.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ru.xlf index 90e4e5879198..4261e1e952ec 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ru.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.ru.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (По умолчанию) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + Произошла ошибка при чтении "{0}": {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Существует несколько профилей, имена которых различаются только регистром, что запрещено: {0} -Make the profile names distinct. +Сделайте имена профилей разными. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + Профиль запуска с именем "{0}" не существует. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + Тип профиля запуска "{0}" не поддерживается. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Профиль с указанным именем не является допустимым объектом JSON. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + Свойство "profiles" документа параметров запуска не является объектом JSON. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + Путь "{0}", указанный в "{1}", недействителен. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Не удается использовать профиль запуска "{0}", так как не удалось найти файл параметров запуска. Попробованные расположения: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Внимание! Параметры из "{0}" не используются, так как "{1}" обладает приоритетом. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Не удалось найти подходящий для использования профиль запуска. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.tr.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.tr.xlf index 80e2d671ae91..6bd01ca3bd48 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.tr.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.tr.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (Varsayılan) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + ‘{0}’ okunurken bir hata oluştu: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + Adı büyük/küçük harfe duyarlı olan birkaç başlatma profili var ama bu duruma izin verilmiyor: {0} -Make the profile names distinct. +Profil adlarının birbirinden farklı olmasını sağlayın. A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + '{0}' adlı bir başlatma profili yok. The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + '{0}' başlatma profili türü desteklenmiyor. A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + Belirtilen adla bir profil, geçerli bir JSON nesnesi değil. The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + Başlatma ayarları belgesinin 'profiles' özelliği bir JSON nesnesi değil. Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + '{1}' içinde belirtilen '{0}' yolu geçersiz. Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + Başlatma ayarları dosyası bulunamadığı için ‘{0}’ başlatma profilini kullanılamıyor. Denenen konumlar: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + Uyarı: ‘{1}’ öncelikli olduğu için ‘{0}’ ayarları kullanılmaz. {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + Kullanılabilir bir başlatma profili bulunamadı. diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hans.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hans.xlf index 6fd81c1778a3..9aded33cb3cd 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hans.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hans.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (默认值) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + 读取 ‘{0}’ 时遇到错误: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + 存在多个名称区分大小写的启动配置文件，这是不允许的: {0} -Make the profile names distinct. +将配置文件名称设为可区分的名称。 A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + 名为“{0}”的启动配置文件不存在。 The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + 不支持启动配置文件类型“{0}”。 A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + 具有指定名称的配置文件不是有效的 JSON 对象。 The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + 启动设置文档的“profiles”属性不是 JSON 对象。 Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + 在“{1}”中指定的路径“{0}”无效。 Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 无法使用启动配置文件“{0}”，因为找不到启动设置文件。已尝试的位置: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 警告: 不使用 ‘{0}’ 中的设置，因为 ‘{1}’ 具有优先级。 {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + 找不到可用的启动配置文件。 diff --git a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hant.xlf b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hant.xlf index eadb9ad89a71..8650ca7c10db 100644 --- a/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hant.xlf +++ b/src/Microsoft.DotNet.ProjectTools/xlf/Resources.zh-Hant.xlf @@ -4,63 +4,63 @@ (Default) - (Default) + (預設) An error was encountered when reading '{0}': {1} - An error was encountered when reading '{0}': {1} + 讀取「{0}」時發生錯誤: {1} {0} is file path. {1} is exception message. There are several launch profiles with case-sensitive names, which isn't permitted: {0} Make the profile names distinct. - There are several launch profiles with case-sensitive names, which isn't permitted: + 數個啟動設定檔具有區分大小寫的名稱，這並不受允許: {0} -Make the profile names distinct. +請讓設定檔名稱相異。 A launch profile with the name '{0}' doesn't exist. - A launch profile with the name '{0}' doesn't exist. + 名稱為 '{0}' 的啟動設定檔不存在。 The launch profile type '{0}' is not supported. - The launch profile type '{0}' is not supported. + 不支援啟動設定檔類型 '{0}'。 A profile with the specified name isn't a valid JSON object. - A profile with the specified name isn't a valid JSON object. + 具有指定名稱的設定檔不是有效的 JSON 物件。 The 'profiles' property of the launch settings document is not a JSON object. - The 'profiles' property of the launch settings document is not a JSON object. + 啟動設定文件的 'profiles' 屬性並非 JSON 物件。 Path '{0}' specified in '{1}' is invalid. - Path '{0}' specified in '{1}' is invalid. + '{1}' 中指定的路徑 '{0}' 無效。 Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: {1} - Cannot use launch profile '{0}' because the launch settings file could not be located. Locations tried: + 無法使用啟動設定檔 '{0}'，因為找不到啟動設定檔案。嘗試的位置: {1} Warning: Settings from '{0}' are not used because '{1}' has precedence. - Warning: Settings from '{0}' are not used because '{1}' has precedence. + 警告: 來自 '{0}' 的設定未被使用，因為 '{1}' 具有優先順序。 {0} is an app.run.json file path. {1} is a launchSettings.json file path. A usable launch profile could not be located. - A usable launch profile could not be located. + 找不到可用的啟動設定檔。 diff --git a/src/Tasks/Common/Resources/xlf/Strings.cs.xlf b/src/Tasks/Common/Resources/xlf/Strings.cs.xlf index b7410728aafb..7d92c76eb7a7 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.cs.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.cs.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType Framework je zastaralý a v budoucí verzi se odebere. Další informace najdete tady: {0}. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.de.xlf b/src/Tasks/Common/Resources/xlf/Strings.de.xlf index eab04469f660..696e8fe02b46 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.de.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.de.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType „Framework“ ist veraltet und wird in einer zukünftigen Version entfernt. Weitere Informationen finden Sie unter {0}. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.es.xlf b/src/Tasks/Common/Resources/xlf/Strings.es.xlf index e537e1a436c2..020f6258977a 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.es.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.es.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType "Framework" está en desuso y se quitará en una versión futura. Consulte {0} para obtener más información. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.fr.xlf b/src/Tasks/Common/Resources/xlf/Strings.fr.xlf index 353311ba604b..29818ec28389 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.fr.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.fr.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType « Framework » est obsolète et sera supprimé dans une future version. Pour plus d’informations, consultez {0}. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.it.xlf b/src/Tasks/Common/Resources/xlf/Strings.it.xlf index e08057dfcd9c..7d495036fd3d 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.it.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.it.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType 'Framework' è deprecato e sarà rimosso in una versione futura. Per altre informazioni, vedere {0}. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.ja.xlf b/src/Tasks/Common/Resources/xlf/Strings.ja.xlf index 472d538b3f76..6ac41619fb8e 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.ja.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.ja.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType 'Framework' は非推奨であり、将来のバージョンで削除される予定です。詳細については、{0} を参照してください。 {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.ko.xlf b/src/Tasks/Common/Resources/xlf/Strings.ko.xlf index 3b0256b68966..b957df09d433 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.ko.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.ko.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType 'Framework'는 더 이상 사용되지 않으며 앞으로의 버전에서 제거될 예정입니다. 자세한 내용은 {0}을(를) 참조하세요. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.pl.xlf b/src/Tasks/Common/Resources/xlf/Strings.pl.xlf index 0cad401e56c7..4c3afb6d46fb 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.pl.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.pl.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType „Framework” jest przestarzały i zostanie usunięty w przyszłych wersjach. Aby uzyskać więcej informacji, zapoznaj się z {0}. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.pt-BR.xlf b/src/Tasks/Common/Resources/xlf/Strings.pt-BR.xlf index 09b9a5863849..ea17be1d8cde 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.pt-BR.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.pt-BR.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: o ''Framework'' RoslynCompilerType está obsoleto e será removido em uma versão futura. Consulte {0} para obter mais informações. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.ru.xlf b/src/Tasks/Common/Resources/xlf/Strings.ru.xlf index b2bbd2c37b63..eb5382a34032 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.ru.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.ru.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType "Framework" является нерекомендуемым и будет удален в будущей версии. Подробнее см. в {0}. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.tr.xlf b/src/Tasks/Common/Resources/xlf/Strings.tr.xlf index d1ea5de9735a..a8740c394b4d 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.tr.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.tr.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType 'Framework' kullanım dışı bırakıldı ve gelecekteki bir sürümde kaldırılacak. Daha fazla bilgi için lütfen {0} sayfasına bakın. {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.zh-Hans.xlf b/src/Tasks/Common/Resources/xlf/Strings.zh-Hans.xlf index 8b7bf1e007da..368e7c3c74ea 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.zh-Hans.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.zh-Hans.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType 'Framework' 已弃用，并将在将来的版本中移除。有关详细信息，请参阅 {0}。 {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"} diff --git a/src/Tasks/Common/Resources/xlf/Strings.zh-Hant.xlf b/src/Tasks/Common/Resources/xlf/Strings.zh-Hant.xlf index d2d4ffb1b168..26069b9ca38b 100644 --- a/src/Tasks/Common/Resources/xlf/Strings.zh-Hant.xlf +++ b/src/Tasks/Common/Resources/xlf/Strings.zh-Hant.xlf @@ -863,7 +863,7 @@ The following are names of parameters or literal values and should not be transl NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. - NETSDK1234: RoslynCompilerType 'Framework' is deprecated and will be removed in a future version. Please refer to {0} for more information. + NETSDK1234: RoslynCompilerType 'Framework' 已遭棄用，並將在未來版本中移除。如需詳細資訊，請參閱 {0}。 {StrBegins="NETSDK1234: "}{Locked="RoslynCompilerType"}{Locked="Framework"}{Locked="{0}"}