Replies: 1 comment 3 replies
-
|
Perhaps your indentation is wrong. Maybe you have some extra spaces, or tabs instead of spaces. If you share the complete configuration file I'll take a look. |
Beta Was this translation helpful? Give feedback.
3 replies
-
|
Thank you # Default/example plotman.yaml configuration file
# https://github.com/ericaltendorf/plotman/wiki/Configuration#versions
version: [2]
logging:
# One directory in which to store all plot job logs (the STDOUT/
# STDERR of all plot jobs). In order to monitor progress, plotman
# reads these logs on a regular basis, so using a fast drive is
# recommended.
plots: /home/truc/chialogs
# transfers:
# application:
# Options for display and rendering
user_interface:
# Call out to the `stty` program to determine terminal size, instead of
# relying on what is reported by the curses library. In some cases,
# the curses library fails to update on SIGWINCH signals. If the
# `plotman interactive` curses interface does not properly adjust when
# you resize the terminal window, you can try setting this to True.
use_stty_size: True
# Optional custom settings for the subcommands (status, interactive etc)
commands:
interactive:
# Set it to False if you don't want to auto start plotting when 'interactive' is ran.
# You can override this value from the command line, type "plotman interactive -h" for details
autostart_plotting: True
autostart_archiving: True
# Where to plot and log.
directories:
# One or more directories to use as tmp dirs for plotting. The
# scheduler will use all of them and distribute jobs among them.
# It assumes that IO is independent for each one (i.e., that each
# one is on a different physical device).
#
# If multiple directories share a common prefix, reports will
# abbreviate and show just the uniquely identifying suffix.
tmp:
- /media/truc/MP1
- /media/truc/MP2
# Optional: tmp2 directory. If specified, will be passed to
# chia plots create as -2. Only one tmp2 directory is supported.
# tmp2: /mnt/tmp/a
# Optional: A list of one or more directories; the scheduler will
# use all of them. These again are presumed to be on independent
# physical devices so writes (plot jobs) and reads (archivals) can
# be scheduled to minimize IO contention.
#
# If dst is commented out, the tmp directories will be used as the
# buffer.
dst:
- /media/truc/WD9
# Archival configuration. Optional; if you do not wish to run the
# archiving operation, comment this section out. Almost everyone
# should be using the archival feature. It is meant to distribute
# plots among multiple disks filling them all. This can be done both
# to local and to remote disks.
#
# As of v0.4, archiving commands are highly configurable. The basic
# configuration consists of a script for checking available disk space
# and another for actually transferring plots. Each can be specified
# as either a path to an existing script or inline script contents.
# It is expected that most people will use existing recipes and will
# adjust them by specifying environment variables that will set their
# system specific values. These can be provided to the scripts via
# the `env` key. plotman will additionally provide `source` and
# `destination` environment variables to the transfer script so it
# knows the specifically selected items to process. plotman also needs
# to be able to generally detect if a transfer process is already
# running. To be able to identify externally launched transfers, the
# process name and an argument prefix to match must be provided. Note
# that variable substitution of environment variables including those
# specified in the env key can be used in both process name and process
# argument prefix elements but that they use the python substitution
# format.
#
# Complete example: https://github.com/ericaltendorf/plotman/wiki/Archiving
# archiving:
# target: local_rsync
# env:
# command: rsync
# site_root: /farm/sites
# Plotting scheduling parameters
scheduling:
# Run a job on a particular temp dir only if the number of existing jobs
# before [tmpdir_stagger_phase_major : tmpdir_stagger_phase_minor]
# is less than tmpdir_stagger_phase_limit.
# Phase major corresponds to the plot phase, phase minor corresponds to
# the table or table pair in sequence, phase limit corresponds to
# the number of plots allowed before [phase major : phase minor].
# e.g, with default settings, a new plot will start only when your plot
# reaches phase [2 : 1] on your temp drive. This setting takes precidence
# over global_stagger_m
tmpdir_stagger_phase_major: 1
tmpdir_stagger_phase_minor: 1
# Optional: default is 1
tmpdir_stagger_phase_limit: 1
# Don't run more than this many jobs at a time on a single temp dir.
tmpdir_max_jobs: 3
# Don't run more than this many jobs at a time in total.
global_max_jobs: 6
# Don't run any jobs (across all temp dirs) more often than this, in minutes.
global_stagger_m: 30
# How often the daemon wakes to consider starting a new plot job, in seconds.
polling_time_s: 20
# Optional: Allows the overriding of some scheduling characteristics of the
# tmp directories specified here.
# This contains a map of tmp directory names to attributes. If a tmp directory
# and attribute is not listed here, the default attribute setting from the main
# configuration will be used
#
# Currently support override parameters:
# - tmpdir_stagger_phase_major (requires tmpdir_stagger_phase_minor)
# - tmpdir_stagger_phase_minor (requires tmpdir_stagger_phase_major)
# - tmpdir_stagger_phase_limit
# - tmpdir_max_jobs
#tmp_overrides:
# In this example, /mnt/tmp/00 is larger and faster than the
# other tmp dirs and it can hold more plots than the default,
# allowing more simultaneous plots, so they are being started
# earlier than the global setting above.
# "/mnt/tmp/00":
# tmpdir_stagger_phase_major: 1
# tmpdir_stagger_phase_minor: 5
#tmpdir_max_jobs: 5
# Here, /mnt/tmp/03 is smaller, so a different config might be
# to space the phase stagger further apart and only allow 2 jobs
# to run concurrently in it
# "/mnt/tmp/03":
# tmpdir_stagger_phase_major: 3
#tmpdir_stagger_phase_minor: 1
#tmpdir_max_jobs: 2
# Plotting parameters. These are pass-through parameters to chia plots create.
# See documentation at
# https://github.com/Chia-Network/chia-blockchain/wiki/CLI-Commands-Reference#create
plotting:
# Your public keys. Be sure to use the pool contract address for
# portable pool plots. The pool public key is only for original
# non-portable plots that can not be used with the official pooling
# protocol.
# farmer_pk: ...
# pool_pk: ...
pool_contract_address: xch1glpe8aekcue9nj4a04tyagmdzcvzdczxzjvp4jv5eh82dqnzaw6swd955v
# If you enable Chia, plot in *parallel* with higher tmpdir_max_jobs and global_max_jobs
type: chia
chia:
# The stock plotter: https://github.com/Chia-Network/chia-blockchain
#executable: /path/to/chia
k: 32 # k-size of plot, leave at 32 most of the time
e: False # Use -e plotting option
n_threads: 2 # Threads per job
n_buckets: 128 # Number of buckets to split data into
job_buffer: 3389 # Per job memory
# If you enable madMAx, plot in *sequence* with very low tmpdir_max_jobs and global_max_jobs
madmax:
# madMAx plotter: https://github.com/madMAx43v3r/chia-plotter
# executable: /path/to/chia_plot
n_threads: 17 # Default is 4, crank up if you have many cores
n_buckets: 256 # Default is 256 |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
arfff just this 😂 thank you a lot for your help it's work fine now |
Beta Was this translation helpful? Give feedback.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hi,
I get this error and don't know what to do:
I look on line 159 and nothing. I also delete and try with new config.yaml.
Beta Was this translation helpful? Give feedback.
All reactions