Cannot Flash FW, no response after +ok= #4
Description
I have some magic home switches and went ahead and used the mhflasher, but not sure if I'm missing some steps.
This is the chip BL602L20 the switch has.
Steps that I followed:
- Put the switch in pairing mode
- Connect to the switch using the mhflasher app
- Press "flash" in the app
After the 3rd step, I get an ok message but after 10+min nothing happens. Am I following the correct steps?
Here are the logs
[08:38:54] OTA server is running on port 1111
[12:07:23] clicked scan
[12:07:23] No permission yet
[12:07:25] Permission granted
[12:07:25] Starting scan
[12:07:28] clicked scan
[12:07:28] Permission granted - skanujemy
[12:07:28] Starting scan
[12:07:30] Success scan
[12:07:30] AP found: RT-INVITADOS
[12:07:30] AP found: REDYTEC_2.4G
[12:07:30] AP found: Lab-Room
[12:07:30] AP found: LEDnet009703AD7D
[12:07:30] AP found: Xiaomi_4BE1
[12:07:30] AP found: Xiaomi_4BE1
[12:07:30] AP found:
[12:07:30] AP found: REDYTEC_2.4G
[12:07:30] AP found:
[12:07:30] Success scan
[12:07:30] AP found: RT-INVITADOS
[12:07:30] AP found: REDYTEC_2.4G
[12:07:30] AP found: Lab-Room
[12:07:30] AP found: LEDnet009703AD7D
[12:07:30] AP found: Xiaomi_4BE1
[12:07:30] AP found: Xiaomi_4BE1
[12:07:30] AP found:
[12:07:30] AP found: REDYTEC_2.4G
[12:07:30] AP found:
[12:07:39] Connected to LEDnet009703AD7D
[12:07:39] got dhcp IPv4: 10.10.123.4
[12:07:39] First DNS Server: 10.10.123.3
[12:07:39] Received: 10.10.123.3,7CB94C03AD7D,AK001-ZJ21411
[12:07:39] mac:7CB94C03AD7D
[12:07:39] dev id:AK001-ZJ21411
[12:07:39] ver: +ok=97_49_20231120_ZG-BL-V2
[12:07:40] got dhcp IPv4: 10.10.123.4
[12:07:40] First DNS Server: 10.10.123.3
[12:07:40] Received: 10.10.123.3,7CB94C03AD7D,AK001-ZJ21411
[12:07:40] mac:7CB94C03AD7D
[12:07:40] dev id:AK001-ZJ21411
[12:07:40] ver: +ok=97_49_20231120_ZG-BL-V2
[12:07:56] unk: +ok=