Prepare for release

Author: olofk

.github/workflows/openlane.yml

@@ -17,4 +17,4 @@ jobs:
         uses: actions/upload-artifact@v2
         with:
           name: serv.gds
-          path: /home/runner/work/serv/serv/build/serv_1.2.1/sky130-openlane/gds/serv_synth_wrapper.gds
+          path: /home/runner/work/serv/serv/build/serv_1.3.0/sky130-openlane/gds/serv_synth_wrapper.gds

NEWS

@@ -1,3 +1,19 @@
+1.3.0 2024-07-05 Olof Kindgren
+======================================================
+
+* Zephyr BSP: Port to Zephyr 3.5.0 + support tickless timer
+* Make RF RAM IF work with single-port RAM
+* Add PC tracing
+* Make most modules width-independent
+* Avoid releasing trap signal too early
+* Improve timer wraparound behavior
+* Overhaul documentation
+* Add Servile convenience wrapper component
+* Base Serving and Serving on Servile
+* Add simulation cycle counter to testbench
+* Add Hello world ASM example for Servant
+* New Servant ports: Arty S7-50, PolarFire Splash Kit, Machdyne Kolibri, GMM-7550, Alchistry AU, ECP5 Evaluation board, Terasic DE1 SoC
+
 1.2.1 2022-12-25 Olof Kindgren
 ======================================================
 

README.md

@@ -76,7 +76,7 @@ We are now ready to do our first exercises with SERV. If everything above is don
 
 If everything worked, the output should look like
 
-    INFO: Preparing ::serv:1.2.1
+    INFO: Preparing ::serv:1.3.0
     INFO: Setting up project
 
     INFO: Building simulation model

doc/servant.rst

@@ -144,7 +144,7 @@ iCEstick
 Pin 95 is used as the GPIO output which is connected to the board's green LED. Due to this board's limited Embedded BRAM, programs with a maximum of 7168 bytes can be loaded. The default program for this board is blinky.hex.
 
     fusesoc run --target=icestick servant
-    iceprog build/servant_1.2.1/icestick-icestorm/servant_1.2.1.bin
+    iceprog build/servant_1.3.0/icestick-icestorm/servant_1.3.0.bin
 
 iCESugar
 ^^^^^^^^
@@ -162,7 +162,7 @@ Pin 9 is used for UART output with 57600 baud rate.
 
     fusesoc run --target=icev_wireless servant
 
-    iceprog build/servant_1.2.1/icestick-icestorm/servant_1.2.1.bin
+    iceprog build/servant_1.3.0/icestick-icestorm/servant_1.3.0.bin
 
 GMM7550
 ^^^^^^^
@@ -181,7 +181,7 @@ Pin B1 is used for UART output with 115200 baud rate. The serial port on Kolibri
 
     fusesoc run --target=machdyne_kolibri servant
 
-    ldprog -Ks build/servant_1.2.1/machdyne_kolibri-icestorm/servant_1.2.1.bin
+    ldprog -Ks build/servant_1.3.0/machdyne_kolibri-icestorm/servant_1.3.0.bin
 
 MAX10 10M08 Evaluation Kit
 ^^^^^^^^^^^^^^^^^^^^
@@ -196,7 +196,7 @@ Nandland Go Board
 Pin 56 is used as the GPIO output which is connected to the board's LED1. Due to this board's limited Embedded BRAM, programs with a maximum of 7168 bytes can be loaded. The default program for this board is blinky.hex.
 
     fusesoc run --target=go_board servant
-    iceprog build/servant_1.2.1/go_board-icestorm/servant_1.2.1.bin
+    iceprog build/servant_1.3.0/go_board-icestorm/servant_1.3.0.bin
 
 Nexys 2
 ^^^^^^^
@@ -218,7 +218,7 @@ OrangeCrab R0.2
 Pin D1 is used for UART output with 115200 baud rate.
 
     fusesoc run --target=orangecrab_r0.2 servant
-    dfu-util -d 1209:5af0 -D build/servant_1.2.1/orangecrab_r0.2-trellis/servant_1.2.1.bit
+    dfu-util -d 1209:5af0 -D build/servant_1.3.0/orangecrab_r0.2-trellis/servant_1.3.0.bit
 
 PolarFire Splash Kit
 ^^^^^^^^^^^^^^^^^^^^

serv.core

@@ -1,6 +1,6 @@
 CAPI=2:
 
-name : ::serv:1.2.1
+name : ::serv:1.3.0
 
 filesets:
   core:

servant.core

@@ -1,6 +1,6 @@
 CAPI=2:
 
-name : ::servant:1.2.1
+name : ::servant:1.3.0
 description: Simple reference system for SERV
 
 filesets:

serving.core

@@ -1,6 +1,6 @@
 CAPI=2:
 
-name : ::serving:1.2.1
+name : ::serving:1.3.0
 description: SERV-based subsystem for FPGAs
 
 filesets:

verif/plugin-serv/riscof_serv.py

@@ -8,7 +8,7 @@
 
 class serv(pluginTemplate):
     __model__ = "serv"
-    __version__ = "1.2.1"
+    __version__ = "1.3.0"
 
     def __init__(self, *args, **kwargs):
         sclass = super().__init__(*args, **kwargs)
@@ -78,7 +78,7 @@ def runTests(self, testList):
           #to the old one
           exe = 'servant_test/verilator_tb/Vservant_sim'
           if not os.path.exists(exe):
-              exe = 'servant_test/servant_1.2.1/verilator_tb/Vservant_sim'
+              exe = 'servant_test/servant_1.3.0/verilator_tb/Vservant_sim'
 
           sigdump_run = [exe,
                          "+timeout=1000000000",