build(deps): bump requests from 2.31.0 to 2.32.0 in /drivers/gpu/drm/ci/xfails #3
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
--- updated-dependencies: - dependency-name: requests dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com>
dependabot
bot
added
the
dependencies
ffainelli
pushed a commit
that referenced
this pull request
Jul 29, 2024
…_child(). syzkaller reported KMSAN splat in tcp_create_openreq_child(). [0] The uninit variable is tcp_rsk(req)->ao_keyid. tcp_rsk(req)->ao_keyid is initialised only when tcp_conn_request() finds a valid TCP AO option in SYN. Then, tcp_rsk(req)->used_tcp_ao is set accordingly. Let's not read tcp_rsk(req)->ao_keyid when tcp_rsk(req)->used_tcp_ao is false. [0]: BUG: KMSAN: uninit-value in tcp_create_openreq_child+0x198b/0x1ff0 net/ipv4/tcp_minisocks.c:610 tcp_create_openreq_child+0x198b/0x1ff0 net/ipv4/tcp_minisocks.c:610 tcp_v4_syn_recv_sock+0x18e/0x2170 net/ipv4/tcp_ipv4.c:1754 tcp_check_req+0x1a3e/0x20c0 net/ipv4/tcp_minisocks.c:852 tcp_v4_rcv+0x26a4/0x53a0 net/ipv4/tcp_ipv4.c:2265 ip_protocol_deliver_rcu+0x884/0x1270 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x30f/0x530 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x230/0x4c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline] ip_sublist_rcv+0x10f7/0x13e0 net/ipv4/ip_input.c:639 ip_list_rcv+0x952/0x9c0 net/ipv4/ip_input.c:674 __netif_receive_skb_list_ptype net/core/dev.c:5703 [inline] __netif_receive_skb_list_core+0xd92/0x11d0 net/core/dev.c:5751 __netif_receive_skb_list net/core/dev.c:5803 [inline] netif_receive_skb_list_internal+0xd8f/0x1350 net/core/dev.c:5895 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x3f2/0x990 net/core/dev.c:6246 e1000_clean+0x1fa4/0x5e50 drivers/net/ethernet/intel/e1000/e1000_main.c:3808 __napi_poll+0xd9/0x990 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x90f/0x17e0 net/core/dev.c:6962 handle_softirqs+0x152/0x6b0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu kernel/softirq.c:637 [inline] irq_exit_rcu+0x5d/0x120 kernel/softirq.c:649 common_interrupt+0x83/0x90 arch/x86/kernel/irq.c:278 asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:693 __msan_instrument_asm_store+0xd6/0xe0 arch_atomic_inc arch/x86/include/asm/atomic.h:53 [inline] raw_atomic_inc include/linux/atomic/atomic-arch-fallback.h:992 [inline] atomic_inc include/linux/atomic/atomic-instrumented.h:436 [inline] page_ref_inc include/linux/page_ref.h:153 [inline] folio_ref_inc include/linux/page_ref.h:160 [inline] filemap_map_order0_folio mm/filemap.c:3596 [inline] filemap_map_pages+0x11c7/0x2270 mm/filemap.c:3644 do_fault_around mm/memory.c:4879 [inline] do_read_fault mm/memory.c:4912 [inline] do_fault mm/memory.c:5051 [inline] do_pte_missing mm/memory.c:3897 [inline] handle_pte_fault mm/memory.c:5381 [inline] __handle_mm_fault mm/memory.c:5524 [inline] handle_mm_fault+0x3677/0x6f00 mm/memory.c:5689 do_user_addr_fault+0x1373/0x2b20 arch/x86/mm/fault.c:1338 handle_page_fault arch/x86/mm/fault.c:1481 [inline] exc_page_fault+0x54/0xc0 arch/x86/mm/fault.c:1539 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623 Uninit was stored to memory at: tcp_create_openreq_child+0x1984/0x1ff0 net/ipv4/tcp_minisocks.c:611 tcp_v4_syn_recv_sock+0x18e/0x2170 net/ipv4/tcp_ipv4.c:1754 tcp_check_req+0x1a3e/0x20c0 net/ipv4/tcp_minisocks.c:852 tcp_v4_rcv+0x26a4/0x53a0 net/ipv4/tcp_ipv4.c:2265 ip_protocol_deliver_rcu+0x884/0x1270 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x30f/0x530 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x230/0x4c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline] ip_sublist_rcv+0x10f7/0x13e0 net/ipv4/ip_input.c:639 ip_list_rcv+0x952/0x9c0 net/ipv4/ip_input.c:674 __netif_receive_skb_list_ptype net/core/dev.c:5703 [inline] __netif_receive_skb_list_core+0xd92/0x11d0 net/core/dev.c:5751 __netif_receive_skb_list net/core/dev.c:5803 [inline] netif_receive_skb_list_internal+0xd8f/0x1350 net/core/dev.c:5895 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x3f2/0x990 net/core/dev.c:6246 e1000_clean+0x1fa4/0x5e50 drivers/net/ethernet/intel/e1000/e1000_main.c:3808 __napi_poll+0xd9/0x990 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x90f/0x17e0 net/core/dev.c:6962 handle_softirqs+0x152/0x6b0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu kernel/softirq.c:637 [inline] irq_exit_rcu+0x5d/0x120 kernel/softirq.c:649 common_interrupt+0x83/0x90 arch/x86/kernel/irq.c:278 asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:693 Uninit was created at: __alloc_pages_noprof+0x82d/0xcb0 mm/page_alloc.c:4706 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] alloc_slab_page mm/slub.c:2265 [inline] allocate_slab mm/slub.c:2428 [inline] new_slab+0x2af/0x14e0 mm/slub.c:2481 ___slab_alloc+0xf73/0x3150 mm/slub.c:3667 __slab_alloc mm/slub.c:3757 [inline] __slab_alloc_node mm/slub.c:3810 [inline] slab_alloc_node mm/slub.c:3990 [inline] kmem_cache_alloc_noprof+0x53a/0x9f0 mm/slub.c:4009 reqsk_alloc_noprof net/ipv4/inet_connection_sock.c:920 [inline] inet_reqsk_alloc+0x63/0x700 net/ipv4/inet_connection_sock.c:951 tcp_conn_request+0x339/0x4860 net/ipv4/tcp_input.c:7177 tcp_v4_conn_request+0x13b/0x190 net/ipv4/tcp_ipv4.c:1719 tcp_rcv_state_process+0x2dd/0x4a10 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0xbee/0x10d0 net/ipv4/tcp_ipv4.c:1932 tcp_v4_rcv+0x3fad/0x53a0 net/ipv4/tcp_ipv4.c:2334 ip_protocol_deliver_rcu+0x884/0x1270 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x30f/0x530 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x230/0x4c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline] ip_sublist_rcv+0x10f7/0x13e0 net/ipv4/ip_input.c:639 ip_list_rcv+0x952/0x9c0 net/ipv4/ip_input.c:674 __netif_receive_skb_list_ptype net/core/dev.c:5703 [inline] __netif_receive_skb_list_core+0xd92/0x11d0 net/core/dev.c:5751 __netif_receive_skb_list net/core/dev.c:5803 [inline] netif_receive_skb_list_internal+0xd8f/0x1350 net/core/dev.c:5895 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x3f2/0x990 net/core/dev.c:6246 e1000_clean+0x1fa4/0x5e50 drivers/net/ethernet/intel/e1000/e1000_main.c:3808 __napi_poll+0xd9/0x990 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x90f/0x17e0 net/core/dev.c:6962 handle_softirqs+0x152/0x6b0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu kernel/softirq.c:637 [inline] irq_exit_rcu+0x5d/0x120 kernel/softirq.c:649 common_interrupt+0x83/0x90 arch/x86/kernel/irq.c:278 asm_common_interrupt+0x26/0x40 arch/x86/include/asm/idtentry.h:693 CPU: 0 PID: 239 Comm: modprobe Tainted: G B 6.10.0-rc7-01816-g852e42cc2dd4 #3 1107521f0c7b55c9309062382d0bda9f604dbb6d Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Fixes: 06b22ef ("net/tcp: Wire TCP-AO to request sockets") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20240714161719.6528-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ffainelli
pushed a commit
that referenced
this pull request
Jul 29, 2024
When tries to demote 1G hugetlb folios, a lockdep warning is observed: ============================================ WARNING: possible recursive locking detected 6.10.0-rc6-00452-ga4d0275fa660-dirty torvalds#79 Not tainted -------------------------------------------- bash/710 is trying to acquire lock: ffffffff8f0a7850 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0x244/0x460 but task is already holding lock: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&h->resize_lock); lock(&h->resize_lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by bash/710: #0: ffff8f118439c3f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 #1: ffff8f11893b9e88 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 #2: ffff8f1183dc4428 (kn->active#98){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 #3: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460 stack backtrace: CPU: 3 PID: 710 Comm: bash Not tainted 6.10.0-rc6-00452-ga4d0275fa660-dirty torvalds#79 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 __lock_acquire+0x10f2/0x1ca0 lock_acquire+0xbe/0x2d0 __mutex_lock+0x6d/0x400 demote_store+0x244/0x460 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa61db14887 RSP: 002b:00007ffc56c48358 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fa61db14887 RDX: 0000000000000002 RSI: 000055a030050220 RDI: 0000000000000001 RBP: 000055a030050220 R08: 00007fa61dbd1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fa61dc1b780 R14: 00007fa61dc17600 R15: 00007fa61dc16a00 </TASK> Lockdep considers this an AA deadlock because the different resize_lock mutexes reside in the same lockdep class, but this is a false positive. Place them in distinct classes to avoid these warnings. Link: https://lkml.kernel.org/r/20240712031314.2570452-1-linmiaohe@huawei.com Fixes: 8531fc6 ("hugetlb: add hugetlb demote page support") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ffainelli
pushed a commit
that referenced
this pull request
Jul 29, 2024
When using cachefiles, lockdep may emit something similar to the circular
locking dependency notice below. The problem appears to stem from the
following:
(1) Cachefiles manipulates xattrs on the files in its cache when called
from ->writepages().
(2) The setxattr() and removexattr() system call handlers get the name
(and value) from userspace after taking the sb_writers lock, putting
accesses of the vma->vm_lock and mm->mmap_lock inside of that.
(3) The afs filesystem uses a per-inode lock to prevent multiple
revalidation RPCs and in writeback vs truncate to prevent parallel
operations from deadlocking against the server on one side and local
page locks on the other.
Fix this by moving the getting of the name and value in {get,remove}xattr()
outside of the sb_writers lock. This also has the minor benefits that we
don't need to reget these in the event of a retry and we never try to take
the sb_writers lock in the event we can't pull the name and value into the
kernel.
Alternative approaches that might fix this include moving the dispatch of a
write to the cache off to a workqueue or trying to do without the
validation lock in afs. Note that this might also affect other filesystems
that use netfslib and/or cachefiles.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-build2+ torvalds#956 Not tainted
------------------------------------------------------
fsstress/6050 is trying to acquire lock:
ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0
but task is already holding lock:
ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&vma->vm_lock->lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_write+0x3b/0x50
vma_start_write+0x6b/0xa0
vma_link+0xcc/0x140
insert_vm_struct+0xb7/0xf0
alloc_bprm+0x2c1/0x390
kernel_execve+0x65/0x1a0
call_usermodehelper_exec_async+0x14d/0x190
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
-> #3 (&mm->mmap_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
__might_fault+0x7c/0xb0
strncpy_from_user+0x25/0x160
removexattr+0x7f/0x100
__do_sys_fremovexattr+0x7e/0xb0
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (sb_writers#14){.+.+}-{0:0}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
percpu_down_read+0x3c/0x90
vfs_iocb_iter_write+0xe9/0x1d0
__cachefiles_write+0x367/0x430
cachefiles_issue_write+0x299/0x2f0
netfs_advance_write+0x117/0x140
netfs_write_folio.isra.0+0x5ca/0x6e0
netfs_writepages+0x230/0x2f0
afs_writepages+0x4d/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
__filemap_fdatawrite_range+0xa8/0xf0
file_write_and_wait_range+0x59/0x90
afs_release+0x10f/0x270
__fput+0x25f/0x3d0
__do_sys_close+0x43/0x70
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&vnode->validate_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
afs_writepages+0x37/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
filemap_invalidate_inode+0x167/0x1e0
netfs_unbuffered_write_iter+0x1bd/0x2d0
vfs_write+0x22e/0x320
ksys_write+0xbc/0x130
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (mapping.invalidate_lock#3){++++}-{3:3}:
check_noncircular+0x119/0x160
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
filemap_fault+0x26e/0x8b0
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&vma->vm_lock->lock);
lock(&mm->mmap_lock);
lock(&vma->vm_lock->lock);
rlock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by fsstress/6050:
#0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
stack backtrace:
CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ torvalds#956
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
check_noncircular+0x119/0x160
? queued_spin_lock_slowpath+0x4be/0x510
? __pfx_check_noncircular+0x10/0x10
? __pfx_queued_spin_lock_slowpath+0x10/0x10
? mark_lock+0x47/0x160
? init_chain_block+0x9c/0xc0
? add_chain_block+0x84/0xf0
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
? __pfx___lock_acquire+0x10/0x10
? __lock_release.isra.0+0x13b/0x230
lock_acquire.part.0+0x103/0x280
? filemap_fault+0x26e/0x8b0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd7/0x120
down_read+0x95/0x200
? filemap_fault+0x26e/0x8b0
? __pfx_down_read+0x10/0x10
? __filemap_get_folio+0x25/0x1a0
filemap_fault+0x26e/0x8b0
? __pfx_filemap_fault+0x10/0x10
? find_held_lock+0x7c/0x90
? __pfx___lock_release.isra.0+0x10/0x10
? __pte_offset_map+0x99/0x110
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
? __pfx___handle_mm_fault+0x10/0x10
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/2136178.1721725194@warthog.procyon.org.uk
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
[brauner: fix minor issues]
Signed-off-by: Christian Brauner <brauner@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Oct 10, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net v2: with kdoc fixes per Paolo Abeni. The following patchset contains Netfilter fixes for net: Patch #1 and #2 handle an esoteric scenario: Given two tasks sending UDP packets to one another, two packets of the same flow in each direction handled by different CPUs that result in two conntrack objects in NEW state, where reply packet loses race. Then, patch #3 adds a testcase for this scenario. Series from Florian Westphal. 1) NAT engine can falsely detect a port collision if it happens to pick up a reply packet as NEW rather than ESTABLISHED. Add extra code to detect this and suppress port reallocation in this case. 2) To complete the clash resolution in the reply direction, extend conntrack logic to detect clashing conntrack in the reply direction to existing entry. 3) Adds a test case. Then, an assorted list of fixes follow: 4) Add a selftest for tproxy, from Antonio Ojea. 5) Guard ctnetlink_*_size() functions under #if defined(CONFIG_NETFILTER_NETLINK_GLUE_CT) || defined(CONFIG_NF_CONNTRACK_EVENTS) From Andy Shevchenko. 6) Use -m socket --transparent in iptables tproxy documentation. From XIE Zhibang. 7) Call kfree_rcu() when releasing flowtable hooks to address race with netlink dump path, from Phil Sutter. 8) Fix compilation warning in nf_reject with CONFIG_BRIDGE_NETFILTER=n. From Simon Horman. 9) Guard ctnetlink_label_size() under CONFIG_NF_CONNTRACK_EVENTS which is its only user, to address a compilation warning. From Simon Horman. 10) Use rcu-protected list iteration over basechain hooks from netlink dump path. 11) Fix memcg for nf_tables, use GFP_KERNEL_ACCOUNT is not complete. 12) Remove old nfqueue conntrack clash resolution. Instead trying to use same destination address consistently which requires double DNAT, use the existing clash resolution which allows clashing packets go through with different destination. Antonio Ojea originally reported an issue from the postrouting chain, I proposed a fix: https://lore.kernel.org/netfilter-devel/ZuwSwAqKgCB2a51-@calendula/T/ which he reported it did not work for him. 13) Adds a selftest for patch 12. 14) Fixes ipvs.sh selftest. netfilter pull request 24-09-26 * tag 'nf-24-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: Avoid hanging ipvs.sh kselftest: add test for nfqueue induced conntrack race netfilter: nfnetlink_queue: remove old clash resolution logic netfilter: nf_tables: missing objects with no memcg accounting netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n netfilter: nf_tables: Keep deleted flowtable hooks until after RCU docs: tproxy: ignore non-transparent sockets in iptables netfilter: ctnetlink: Guard possible unused functions selftests: netfilter: nft_tproxy.sh: add tcp tests selftests: netfilter: add reverse-clash resolution test case netfilter: conntrack: add clash resolution for reverse collisions netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash ==================== Link: https://patch.msgid.link/20240926110717.102194-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
The function blk_revalidate_disk_zones() calls the function
disk_update_zone_resources() after freezing the device queue. In turn,
disk_update_zone_resources() calls queue_limits_start_update() which
takes a queue limits mutex lock, resulting in the ordering:
q->q_usage_counter check -> q->limits_lock. However, the usual ordering
is to always take a queue limit lock before freezing the queue to commit
the limits updates, e.g., the code pattern:
lim = queue_limits_start_update(q);
...
blk_mq_freeze_queue(q);
ret = queue_limits_commit_update(q, &lim);
blk_mq_unfreeze_queue(q);
Thus, blk_revalidate_disk_zones() introduces a potential circular
locking dependency deadlock that lockdep sometimes catches with the
splat:
[ 51.934109] ======================================================
[ 51.935916] WARNING: possible circular locking dependency detected
[ 51.937561] 6.12.0+ #2107 Not tainted
[ 51.938648] ------------------------------------------------------
[ 51.940351] kworker/u16:4/157 is trying to acquire lock:
[ 51.941805] ffff9fff0aa0bea8 (&q->limits_lock){+.+.}-{4:4}, at: disk_update_zone_resources+0x86/0x170
[ 51.944314]
but task is already holding lock:
[ 51.945688] ffff9fff0aa0b890 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: blk_revalidate_disk_zones+0x15f/0x340
[ 51.948527]
which lock already depends on the new lock.
[ 51.951296]
the existing dependency chain (in reverse order) is:
[ 51.953708]
-> #1 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
[ 51.956131] blk_queue_enter+0x1c9/0x1e0
[ 51.957290] blk_mq_alloc_request+0x187/0x2a0
[ 51.958365] scsi_execute_cmd+0x78/0x490 [scsi_mod]
[ 51.959514] read_capacity_16+0x111/0x410 [sd_mod]
[ 51.960693] sd_revalidate_disk.isra.0+0x872/0x3240 [sd_mod]
[ 51.962004] sd_probe+0x2d7/0x520 [sd_mod]
[ 51.962993] really_probe+0xd5/0x330
[ 51.963898] __driver_probe_device+0x78/0x110
[ 51.964925] driver_probe_device+0x1f/0xa0
[ 51.965916] __driver_attach_async_helper+0x60/0xe0
[ 51.967017] async_run_entry_fn+0x2e/0x140
[ 51.968004] process_one_work+0x21f/0x5a0
[ 51.968987] worker_thread+0x1dc/0x3c0
[ 51.969868] kthread+0xe0/0x110
[ 51.970377] ret_from_fork+0x31/0x50
[ 51.970983] ret_from_fork_asm+0x11/0x20
[ 51.971587]
-> #0 (&q->limits_lock){+.+.}-{4:4}:
[ 51.972479] __lock_acquire+0x1337/0x2130
[ 51.973133] lock_acquire+0xc5/0x2d0
[ 51.973691] __mutex_lock+0xda/0xcf0
[ 51.974300] disk_update_zone_resources+0x86/0x170
[ 51.975032] blk_revalidate_disk_zones+0x16c/0x340
[ 51.975740] sd_zbc_revalidate_zones+0x73/0x160 [sd_mod]
[ 51.976524] sd_revalidate_disk.isra.0+0x465/0x3240 [sd_mod]
[ 51.977824] sd_probe+0x2d7/0x520 [sd_mod]
[ 51.978917] really_probe+0xd5/0x330
[ 51.979915] __driver_probe_device+0x78/0x110
[ 51.981047] driver_probe_device+0x1f/0xa0
[ 51.982143] __driver_attach_async_helper+0x60/0xe0
[ 51.983282] async_run_entry_fn+0x2e/0x140
[ 51.984319] process_one_work+0x21f/0x5a0
[ 51.985873] worker_thread+0x1dc/0x3c0
[ 51.987289] kthread+0xe0/0x110
[ 51.988546] ret_from_fork+0x31/0x50
[ 51.989926] ret_from_fork_asm+0x11/0x20
[ 51.991376]
other info that might help us debug this:
[ 51.994127] Possible unsafe locking scenario:
[ 51.995651] CPU0 CPU1
[ 51.996694] ---- ----
[ 51.997716] lock(&q->q_usage_counter(queue)#3);
[ 51.998817] lock(&q->limits_lock);
[ 52.000043] lock(&q->q_usage_counter(queue)#3);
[ 52.001638] lock(&q->limits_lock);
[ 52.002485]
*** DEADLOCK ***
Prevent this issue by moving the calls to blk_mq_freeze_queue() and
blk_mq_unfreeze_queue() around the call to queue_limits_commit_update()
in disk_update_zone_resources(). In case of revalidation failure, the
call to disk_free_zone_resources() in blk_revalidate_disk_zones()
is still done with the queue frozen as before.
Fixes: 843283e ("block: Fake max open zones limit when there is no limit")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241126104705.183996-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
Its used from trace__run(), for the 'perf trace' live mode, i.e. its
strace-like, non-perf.data file processing mode, the most common one.
The trace__run() function will set trace->host using machine__new_host()
that is supposed to give a machine instance representing the running
machine, and since we'll use perf_env__arch_strerrno() to get the right
errno -> string table, we need to use machine->env, so initialize it in
machine__new_host().
Before the patch:
(gdb) run trace --errno-summary -a sleep 1
<SNIP>
Summary of events:
gvfs-afc-volume (3187), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
pselect6 1 0 0.000 0.000 0.000 0.000 0.00%
GUsbEventThread (3519), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 1 0 0.000 0.000 0.000 0.000 0.00%
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
478 if (env->arch_strerrno == NULL)
(gdb) bt
#0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
#1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673
#2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708
#3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747
#4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456
#5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487
torvalds#6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351
torvalds#7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404
torvalds#8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448
torvalds#9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560
(gdb)
After:
root@number:~# perf trace -a --errno-summary sleep 1
<SNIP>
pw-data-loop (2685), 1410 events, 16.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68%
ioctl 94 0 0.811 0.004 0.009 0.016 2.82%
read 188 0 0.322 0.001 0.002 0.006 5.15%
write 141 0 0.280 0.001 0.002 0.018 8.39%
timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47%
gnome-control-c (179406), 1848 events, 20.9%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 222 0 959.577 0.000 4.322 21.414 11.40%
recvmsg 150 0 0.539 0.001 0.004 0.013 5.12%
write 300 0 0.442 0.001 0.001 0.007 3.29%
read 150 0 0.183 0.001 0.001 0.009 5.53%
getpid 102 0 0.101 0.000 0.001 0.008 7.82%
root@number:~#
Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()")
Reported-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce torvalds#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced torvalds#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b torvalds#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 torvalds#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <yingfu.zhou@shopee.com> Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Signed-off-by: Yue.zhao <yue.zhao@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
Konstantin Shkolnyy says: ==================== vsock/test: fix wrong setsockopt() parameters Parameters were created using wrong C types, which caused them to be of wrong size on some architectures, causing problems. The problem with SO_RCVLOWAT was found on s390 (big endian), while x86-64 didn't show it. After the fix, all tests pass on s390. Then Stefano Garzarella pointed out that SO_VM_SOCKETS_* calls might have a similar problem, which turned out to be true, hence, the second patch. Changes for v8: - Fix whitespace warnings from "checkpatch.pl --strict" - Add maintainers to Cc: Changes for v7: - Rebase on top of https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git - Add the "net" tags to the subjects Changes for v6: - rework the patch #3 to avoid creating a new file for new functions, and exclude vsock_perf from calling the new functions. - add "Reviewed-by:" to the patch #2. Changes for v5: - in the patch #2 replace the introduced uint64_t with unsigned long long to match documentation - add a patch #3 that verifies every setsockopt() call. Changes for v4: - add "Reviewed-by:" to the first patch, and add a second patch fixing SO_VM_SOCKETS_* calls, which depends on the first one (hence, it's now a patch series.) Changes for v3: - fix the same problem in vsock_perf and update commit message Changes for v2: - add "Fixes:" lines to the commit message ==================== Link: https://patch.msgid.link/20241203150656.287028-1-kshk@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
Hou Tao says: ==================== This patch set fixes several issues for LPM trie. These issues were found during adding new test cases or were reported by syzbot. The patch set is structured as follows: Patch #1~#2 are clean-ups for lpm_trie_update_elem(). Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie. Patch #4 fixes the accounting of n_entries when doing in-place update. Patch #5 fixes the exact match condition in trie_get_next_key() and it may skip keys when the passed key is not found in the map. Patch torvalds#6~torvalds#7 switch from kmalloc() to bpf memory allocator for LPM trie to fix several lock order warnings reported by syzbot. It also enables raw_spinlock_t for LPM trie again. After these changes, the LPM trie will be closer to being usable in any context (though the reentrance check of trie->lock is still missing, but it is on my todo list). Patch torvalds#8: move test_lpm_map to map_tests to make it run regularly. Patch torvalds#9: add test cases for the issues fixed by patch #3~#5. Please see individual patches for more details. Comments are always welcome. Change Log: v3: * patch #2: remove the unnecessary NULL-init for im_node * patch torvalds#6: alloc the leaf node before disabling IRQ to low the possibility of -ENOMEM when leaf_size is large; Free these nodes outside the trie lock (Suggested by Alexei) * collect review and ack tags (Thanks for Toke & Daniel) v2: https://lore.kernel.org/bpf/20241127004641.1118269-1-houtao@huaweicloud.com/ * collect review tags (Thanks for Toke) * drop "Add bpf_mem_cache_is_mergeable() helper" patch * patch #3~#4: add fix tag * patch #4: rename the helper to trie_check_add_elem() and increase n_entries in it. * patch torvalds#6: use one bpf mem allocator and update commit message to clarify that using bpf mem allocator is more appropriate. * patch torvalds#7: update commit message to add the possible max running time for update operation. * patch torvalds#9: update commit message to specify the purpose of these test cases. v1: https://lore.kernel.org/bpf/20241118010808.2243555-1-houtao@huaweicloud.com/ ==================== Link: https://lore.kernel.org/all/20241206110622.1161752-1-houtao@huaweicloud.com/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs
like the bellow:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
4 locks held by kworker/u9:2/5070:
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline]
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335
#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline]
#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335
#2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915
CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
__might_resched+0x5d4/0x780 kernel/sched/core.c:10187
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752
hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline]
hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939
hci_event_func net/bluetooth/hci_event.c:7514 [inline]
hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569
hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
</TASK>
Reported-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com
Tested-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
This fixes the circular locking dependency warning below, by releasing the socket lock before enterning iso_listen_bis, to avoid any potential deadlock with hdev lock. [ 75.307983] ====================================================== [ 75.307984] WARNING: possible circular locking dependency detected [ 75.307985] 6.12.0-rc6+ torvalds#22 Not tainted [ 75.307987] ------------------------------------------------------ [ 75.307987] kworker/u81:2/2623 is trying to acquire lock: [ 75.307988] ffff8fde1769da58 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO) at: iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308021] but task is already holding lock: [ 75.308022] ffff8fdd61a10078 (&hdev->lock) at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308053] which lock already depends on the new lock. [ 75.308054] the existing dependency chain (in reverse order) is: [ 75.308055] -> #1 (&hdev->lock){+.+.}-{3:3}: [ 75.308057] __mutex_lock+0xad/0xc50 [ 75.308061] mutex_lock_nested+0x1b/0x30 [ 75.308063] iso_sock_listen+0x143/0x5c0 [bluetooth] [ 75.308085] __sys_listen_socket+0x49/0x60 [ 75.308088] __x64_sys_listen+0x4c/0x90 [ 75.308090] x64_sys_call+0x2517/0x25f0 [ 75.308092] do_syscall_64+0x87/0x150 [ 75.308095] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 75.308098] -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 75.308100] __lock_acquire+0x155e/0x25f0 [ 75.308103] lock_acquire+0xc9/0x300 [ 75.308105] lock_sock_nested+0x32/0x90 [ 75.308107] iso_connect_cfm+0x253/0x840 [bluetooth] [ 75.308128] hci_connect_cfm+0x6c/0x190 [bluetooth] [ 75.308155] hci_le_per_adv_report_evt+0x27b/0x2f0 [bluetooth] [ 75.308180] hci_le_meta_evt+0xe7/0x200 [bluetooth] [ 75.308206] hci_event_packet+0x21f/0x5c0 [bluetooth] [ 75.308230] hci_rx_work+0x3ae/0xb10 [bluetooth] [ 75.308254] process_one_work+0x212/0x740 [ 75.308256] worker_thread+0x1bd/0x3a0 [ 75.308258] kthread+0xe4/0x120 [ 75.308259] ret_from_fork+0x44/0x70 [ 75.308261] ret_from_fork_asm+0x1a/0x30 [ 75.308263] other info that might help us debug this: [ 75.308264] Possible unsafe locking scenario: [ 75.308264] CPU0 CPU1 [ 75.308265] ---- ---- [ 75.308265] lock(&hdev->lock); [ 75.308267] lock(sk_lock- AF_BLUETOOTH-BTPROTO_ISO); [ 75.308268] lock(&hdev->lock); [ 75.308269] lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); [ 75.308270] *** DEADLOCK *** [ 75.308271] 4 locks held by kworker/u81:2/2623: [ 75.308272] #0: ffff8fdd66e52148 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x443/0x740 [ 75.308276] #1: ffffafb488b7fe48 ((work_completion)(&hdev->rx_work)), at: process_one_work+0x1ce/0x740 [ 75.308280] #2: ffff8fdd61a10078 (&hdev->lock){+.+.}-{3:3} at: hci_le_per_adv_report_evt+0x47/0x2f0 [bluetooth] [ 75.308304] #3: ffffffffb6ba4900 (rcu_read_lock){....}-{1:2}, at: hci_connect_cfm+0x29/0x190 [bluetooth] Fixes: 02171da ("Bluetooth: ISO: Add hcon for listening bis sk") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ffainelli
pushed a commit
that referenced
this pull request
Dec 17, 2024
…s_lock For storing a value to a queue attribute, the queue_attr_store function first freezes the queue (->q_usage_counter(io)) and then acquire ->sysfs_lock. This seems not correct as the usual ordering should be to acquire ->sysfs_lock before freezing the queue. This incorrect ordering causes the following lockdep splat which we are able to reproduce always simply by accessing /sys/kernel/debug file using ls command: [ 57.597146] WARNING: possible circular locking dependency detected [ 57.597154] 6.12.0-10553-gb86545e02e8c torvalds#20 Tainted: G W [ 57.597162] ------------------------------------------------------ [ 57.597168] ls/4605 is trying to acquire lock: [ 57.597176] c00000003eb56710 (&mm->mmap_lock){++++}-{4:4}, at: __might_fault+0x58/0xc0 [ 57.597200] but task is already holding lock: [ 57.597207] c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4 [ 57.597226] which lock already depends on the new lock. [ 57.597233] the existing dependency chain (in reverse order) is: [ 57.597241] -> #5 (&sb->s_type->i_mutex_key#3){++++}-{4:4}: [ 57.597255] down_write+0x6c/0x18c [ 57.597264] start_creating+0xb4/0x24c [ 57.597274] debugfs_create_dir+0x2c/0x1e8 [ 57.597283] blk_register_queue+0xec/0x294 [ 57.597292] add_disk_fwnode+0x2e4/0x548 [ 57.597302] brd_alloc+0x2c8/0x338 [ 57.597309] brd_init+0x100/0x178 [ 57.597317] do_one_initcall+0x88/0x3e4 [ 57.597326] kernel_init_freeable+0x3cc/0x6e0 [ 57.597334] kernel_init+0x34/0x1cc [ 57.597342] ret_from_kernel_user_thread+0x14/0x1c [ 57.597350] -> #4 (&q->debugfs_mutex){+.+.}-{4:4}: [ 57.597362] __mutex_lock+0xfc/0x12a0 [ 57.597370] blk_register_queue+0xd4/0x294 [ 57.597379] add_disk_fwnode+0x2e4/0x548 [ 57.597388] brd_alloc+0x2c8/0x338 [ 57.597395] brd_init+0x100/0x178 [ 57.597402] do_one_initcall+0x88/0x3e4 [ 57.597410] kernel_init_freeable+0x3cc/0x6e0 [ 57.597418] kernel_init+0x34/0x1cc [ 57.597426] ret_from_kernel_user_thread+0x14/0x1c [ 57.597434] -> #3 (&q->sysfs_lock){+.+.}-{4:4}: [ 57.597446] __mutex_lock+0xfc/0x12a0 [ 57.597454] queue_attr_store+0x9c/0x110 [ 57.597462] sysfs_kf_write+0x70/0xb0 [ 57.597471] kernfs_fop_write_iter+0x1b0/0x2ac [ 57.597480] vfs_write+0x3dc/0x6e8 [ 57.597488] ksys_write+0x84/0x140 [ 57.597495] system_call_exception+0x130/0x360 [ 57.597504] system_call_common+0x160/0x2c4 [ 57.597516] -> #2 (&q->q_usage_counter(io)torvalds#21){++++}-{0:0}: [ 57.597530] __submit_bio+0x5ec/0x828 [ 57.597538] submit_bio_noacct_nocheck+0x1e4/0x4f0 [ 57.597547] iomap_readahead+0x2a0/0x448 [ 57.597556] xfs_vm_readahead+0x28/0x3c [ 57.597564] read_pages+0x88/0x41c [ 57.597571] page_cache_ra_unbounded+0x1ac/0x2d8 [ 57.597580] filemap_get_pages+0x188/0x984 [ 57.597588] filemap_read+0x13c/0x4bc [ 57.597596] xfs_file_buffered_read+0x88/0x17c [ 57.597605] xfs_file_read_iter+0xac/0x158 [ 57.597614] vfs_read+0x2d4/0x3b4 [ 57.597622] ksys_read+0x84/0x144 [ 57.597629] system_call_exception+0x130/0x360 [ 57.597637] system_call_common+0x160/0x2c4 [ 57.597647] -> #1 (mapping.invalidate_lock#2){++++}-{4:4}: [ 57.597661] down_read+0x6c/0x220 [ 57.597669] filemap_fault+0x870/0x100c [ 57.597677] xfs_filemap_fault+0xc4/0x18c [ 57.597684] __do_fault+0x64/0x164 [ 57.597693] __handle_mm_fault+0x1274/0x1dac [ 57.597702] handle_mm_fault+0x248/0x484 [ 57.597711] ___do_page_fault+0x428/0xc0c [ 57.597719] hash__do_page_fault+0x30/0x68 [ 57.597727] do_hash_fault+0x90/0x35c [ 57.597736] data_access_common_virt+0x210/0x220 [ 57.597745] _copy_from_user+0xf8/0x19c [ 57.597754] sel_write_load+0x178/0xd54 [ 57.597762] vfs_write+0x108/0x6e8 [ 57.597769] ksys_write+0x84/0x140 [ 57.597777] system_call_exception+0x130/0x360 [ 57.597785] system_call_common+0x160/0x2c4 [ 57.597794] -> #0 (&mm->mmap_lock){++++}-{4:4}: [ 57.597806] __lock_acquire+0x17cc/0x2330 [ 57.597814] lock_acquire+0x138/0x400 [ 57.597822] __might_fault+0x7c/0xc0 [ 57.597830] filldir64+0xe8/0x390 [ 57.597839] dcache_readdir+0x80/0x2d4 [ 57.597846] iterate_dir+0xd8/0x1d4 [ 57.597855] sys_getdents64+0x88/0x2d4 [ 57.597864] system_call_exception+0x130/0x360 [ 57.597872] system_call_common+0x160/0x2c4 [ 57.597881] other info that might help us debug this: [ 57.597888] Chain exists of: &mm->mmap_lock --> &q->debugfs_mutex --> &sb->s_type->i_mutex_key#3 [ 57.597905] Possible unsafe locking scenario: [ 57.597911] CPU0 CPU1 [ 57.597917] ---- ---- [ 57.597922] rlock(&sb->s_type->i_mutex_key#3); [ 57.597932] lock(&q->debugfs_mutex); [ 57.597940] lock(&sb->s_type->i_mutex_key#3); [ 57.597950] rlock(&mm->mmap_lock); [ 57.597958] *** DEADLOCK *** [ 57.597965] 2 locks held by ls/4605: [ 57.597971] #0: c0000000137c12f8 (&f->f_pos_lock){+.+.}-{4:4}, at: fdget_pos+0xcc/0x154 [ 57.597989] #1: c0000018e27c6810 (&sb->s_type->i_mutex_key#3){++++}-{4:4}, at: iterate_dir+0x94/0x1d4 Prevent the above lockdep warning by acquiring ->sysfs_lock before freezing the queue while storing a queue attribute in queue_attr_store function. Later, we also found[1] another function __blk_mq_update_nr_ hw_queues where we first freeze queue and then acquire the ->sysfs_lock. So we've also updated lock ordering in __blk_mq_update_nr_hw_queues function and ensured that in all code paths we follow the correct lock ordering i.e. acquire ->sysfs_lock before freezing the queue. [1] https://lore.kernel.org/all/CAFj5m9Ke8+EHKQBs_Nk6hqd=LGXtk4mUxZUN5==ZcCjnZSBwHw@mail.gmail.com/ Reported-by: kjain@linux.ibm.com Fixes: af28141 ("block: freeze the queue in queue_attr_store") Tested-by: kjain@linux.ibm.com Cc: hch@lst.de Cc: axboe@kernel.dk Cc: ritesh.list@gmail.com Cc: ming.lei@redhat.com Cc: gjoyce@linux.ibm.com Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20241210144222.1066229-1-nilay@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
ffainelli
pushed a commit
that referenced
this pull request
Feb 25, 2025
libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:
$ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
#0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
#1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
#2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
#3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
#4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
torvalds#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
torvalds#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
torvalds#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
torvalds#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
torvalds#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
torvalds#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
torvalds#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)
0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1
Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Feb 25, 2025
This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 torvalds#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 torvalds#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 torvalds#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 torvalds#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <liuye@kylinos.cn> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ffainelli
pushed a commit
that referenced
this pull request
Mar 8, 2025
Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ torvalds#251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> #1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
ffainelli
pushed a commit
that referenced
this pull request
Mar 8, 2025
…rary mm Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13: [ 12.028126] ================================================================== [ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1 [ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3 [ 12.028408] Tainted: [T]=RANDSTRUCT [ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [ 12.028500] Call Trace: [ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable) [ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708 [ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300 [ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370 [ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40 [ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0 [ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210 [ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590 [ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0 [ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0 [ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930 [ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280 [ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370 [ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00 [ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40 [ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610 [ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280 [ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8 [ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000 [ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty) [ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000 [ 12.029855] IRQMASK: 0 GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005 GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000 GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90 GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80 GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8 GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580 [ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8 [ 12.030405] --- interrupt: 3000 [ 12.030444] ================================================================== Commit c28c15b ("powerpc/code-patching: Use temporary mm for Radix MMU") is inspired from x86 but unlike x86 is doesn't disable KASAN reports during patching. This wasn't a problem at the begining because __patch_mem() is not instrumented. Commit 465cabc ("powerpc/code-patching: introduce patch_instructions()") use copy_to_kernel_nofault() to copy several instructions at once. But when using temporary mm the destination is not regular kernel memory but a kind of kernel-like memory located in user address space. Because it is not in kernel address space it is not covered by KASAN shadow memory. Since commit e4137f0 ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports bad accesses from copy_to_kernel_nofault(). Here a bad access to user memory is reported because KASAN detects the lack of shadow memory and the address is below TASK_SIZE. Do like x86 in commit b3fd8e8 ("x86/alternatives: Use temporary mm for text poking") and disable KASAN reports during patching when using temporary mm. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Close: https://lore.kernel.org/all/20250201151435.48400261@yea/ Fixes: 465cabc ("powerpc/code-patching: introduce patch_instructions()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu
ffainelli
pushed a commit
that referenced
this pull request
Mar 8, 2025
We have several places across the kernel where we want to access another
task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making
a call to syscall_get_arguments().
This works for register arguments right away by accessing the task's
`regs' member of `struct pt_regs', however for stack arguments seen with
32-bit/o32 kernels things are more complicated. Technically they ought
to be obtained from the user stack with calls to an access_remote_vm(),
but we have an easier way available already.
So as to be able to access syscall stack arguments as regular function
arguments following the MIPS calling convention we copy them over from
the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in
handle_sys(), to the current stack frame's outgoing argument space at
the top of the stack, which is where the handler called expects to see
its incoming arguments. This area is also pointed at by the `pt_regs'
pointer obtained by task_pt_regs().
Make the o32 stack argument space a proper member of `struct pt_regs'
then, by renaming the existing member from `pad0' to `args' and using
generated offsets to access the space. No functional change though.
With the change in place the o32 kernel stack frame layout at the entry
to a syscall handler invoked by handle_sys() is therefore as follows:
$sp + 68 -> | ... | <- pt_regs.regs[9]
+---------------------+
$sp + 64 -> | $t0 | <- pt_regs.regs[8]
+---------------------+
$sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7]
+---------------------+
$sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6]
+---------------------+
$sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5]
+---------------------+
$sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4]
+---------------------+
$sp + 44 -> | $v1 | <- pt_regs.regs[3]
+---------------------+
$sp + 40 -> | $v0 | <- pt_regs.regs[2]
+---------------------+
$sp + 36 -> | $at | <- pt_regs.regs[1]
+---------------------+
$sp + 32 -> | $zero | <- pt_regs.regs[0]
+---------------------+
$sp + 28 -> | stack argument torvalds#8 | <- pt_regs.args[7]
+---------------------+
$sp + 24 -> | stack argument torvalds#7 | <- pt_regs.args[6]
+---------------------+
$sp + 20 -> | stack argument torvalds#6 | <- pt_regs.args[5]
+---------------------+
$sp + 16 -> | stack argument #5 | <- pt_regs.args[4]
+---------------------+
$sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3]
+---------------------+
$sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2]
+---------------------+
$sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1]
+---------------------+
$sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0]
+---------------------+
holding user data received and with the first 4 frame slots reserved by
the psABI for the compiler to spill the incoming arguments from $a0-$a3
registers (which it sometimes does according to its needs) and the next
4 frame slots designated by the psABI for any stack function arguments
that follow. This data is also available for other tasks to peek/poke
at as reqired and where permitted.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ffainelli
pushed a commit
that referenced
this pull request
Mar 8, 2025
…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #3 - Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout. - Bring back the VMID allocation to the vcpu_load phase, ensuring that we only setup VTTBR_EL2 once on VHE. This cures an ugly race that would lead to running with an unallocated VMID.
ffainelli
pushed a commit
that referenced
this pull request
Apr 7, 2025
Two fixes from the recent logging changes:
bch2_inconsistent(), bch2_fs_inconsistent() be called from interrupt
context, or with rcu_read_lock() held.
The one syzbot found is in
bch2_bkey_pick_read_device
bch2_dev_rcu
bch2_fs_inconsistent
We're starting to switch to lift the printbufs up to higher levels so we
can emit better log messages and print them all in one go (avoid
garbling), so that conversion will help with spotting these in the
future; when we declare a printbuf it must be flagged if we're in an
atomic context.
Secondly, in btree_node_write_endio:
00085 BUG: sleeping function called from invalid context at include/linux/sched/mm.h:321
00085 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 618, name: bch-reclaim/fa6
00085 preempt_count: 10001, expected: 0
00085 RCU nest depth: 0, expected: 0
00085 4 locks held by bch-reclaim/fa6/618:
00085 #0: ffffff80d7ccad68 (&j->reclaim_lock){+.+.}-{4:4}, at: bch2_journal_reclaim_thread+0x84/0x198
00085 #1: ffffff80d7c84218 (&c->btree_trans_barrier){.+.+}-{0:0}, at: __bch2_trans_get+0x1c0/0x440
00085 #2: ffffff80cd3f8140 (bcachefs_btree){+.+.}-{0:0}, at: __bch2_trans_get+0x22c/0x440
00085 #3: ffffff80c3823c20 (&vblk->vqs[i].lock){-.-.}-{3:3}, at: virtblk_done+0x58/0x130
00085 irq event stamp: 328
00085 hardirqs last enabled at (327): [<ffffffc080073a14>] finish_task_switch.isra.0+0xbc/0x2a0
00085 hardirqs last disabled at (328): [<ffffffc080971a10>] el1_interrupt+0x20/0x60
00085 softirqs last enabled at (0): [<ffffffc08002f920>] copy_process+0x7c8/0x2118
00085 softirqs last disabled at (0): [<0000000000000000>] 0x0
00085 Preemption disabled at:
00085 [<ffffffc08003ada0>] irq_enter_rcu+0x18/0x90
00085 CPU: 8 UID: 0 PID: 618 Comm: bch-reclaim/fa6 Not tainted 6.14.0-rc6-ktest-g04630bde23e8 #18798
00085 Hardware name: linux,dummy-virt (DT)
00085 Call trace:
00085 show_stack+0x1c/0x30 (C)
00085 dump_stack_lvl+0x84/0xc0
00085 dump_stack+0x14/0x20
00085 __might_resched+0x180/0x288
00085 __might_sleep+0x4c/0x88
00085 __kmalloc_node_track_caller_noprof+0x34c/0x3e0
00085 krealloc_noprof+0x1a0/0x2d8
00085 bch2_printbuf_make_room+0x9c/0x120
00085 bch2_prt_printf+0x60/0x1b8
00085 btree_node_write_endio+0x1b0/0x2d8
00085 bio_endio+0x138/0x1f0
00085 btree_node_write_endio+0xe8/0x2d8
00085 bio_endio+0x138/0x1f0
00085 blk_update_request+0x220/0x4c0
00085 blk_mq_end_request+0x28/0x148
00085 virtblk_request_done+0x64/0xe8
00085 blk_mq_complete_request+0x34/0x40
00085 virtblk_done+0x78/0x130
00085 vring_interrupt+0x6c/0xb0
00085 __handle_irq_event_percpu+0x8c/0x2e0
00085 handle_irq_event+0x50/0xb0
00085 handle_fasteoi_irq+0xc4/0x250
00085 handle_irq_desc+0x44/0x60
00085 generic_handle_domain_irq+0x20/0x30
00085 gic_handle_irq+0x54/0xc8
00085 call_on_irq_stack+0x24/0x40
Reported-by: syzbot+c82cd2906e2f192410bb@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ffainelli
pushed a commit
that referenced
this pull request
Apr 7, 2025
v2:
- Created a single error handling unlock and exit in veth_pool_store
- Greatly expanded commit message with previous explanatory-only text
Summary: Use rtnl_mutex to synchronize veth_pool_store with itself,
ibmveth_close and ibmveth_open, preventing multiple calls in a row to
napi_disable.
Background: Two (or more) threads could call veth_pool_store through
writing to /sys/devices/vio/30000002/pool*/*. You can do this easily
with a little shell script. This causes a hang.
I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new
kernel. I ran this test again and saw:
Setting pool0/active to 0
Setting pool1/active to 1
[ 73.911067][ T4365] ibmveth 30000002 eth0: close starting
Setting pool1/active to 1
Setting pool1/active to 0
[ 73.911367][ T4366] ibmveth 30000002 eth0: close starting
[ 73.916056][ T4365] ibmveth 30000002 eth0: close complete
[ 73.916064][ T4365] ibmveth 30000002 eth0: open starting
[ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification.
[ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds.
[ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty torvalds#8
[ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000
[ 243.683852][ T123] Call Trace:
[ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable)
[ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0
[ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0
[ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210
[ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50
[ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0
[ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60
[ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc
[ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270
[ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0
[ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0
[ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650
[ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150
[ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340
[ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
...
[ 243.684087][ T123] Showing all locks held in the system:
[ 243.684095][ T123] 1 lock held by khungtaskd/123:
[ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248
[ 243.684114][ T123] 4 locks held by stress.sh/4365:
[ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60
[ 243.684166][ T123] 5 locks held by stress.sh/4366:
[ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150
[ 243.684183][ T123] #1: c00000000aee2288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0
[ 243.684194][ T123] #2: c0000000366f4ba8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0
[ 243.684205][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_disable+0x30/0x60
[ 243.684216][ T123] #4: c0000003ff9bbf18 (&rq->__lock){-.-.}-{2:2}, at: __schedule+0x138/0x12a0
From the ibmveth debug, two threads are calling veth_pool_store, which
calls ibmveth_close and ibmveth_open. Here's the sequence:
T4365 T4366
----------------- ----------------- ---------
veth_pool_store veth_pool_store
ibmveth_close
ibmveth_close
napi_disable
napi_disable
ibmveth_open
napi_enable <- HANG
ibmveth_close calls napi_disable at the top and ibmveth_open calls
napi_enable at the top.
https://docs.kernel.org/networking/napi.html]] says
The control APIs are not idempotent. Control API calls are safe
against concurrent use of datapath APIs but an incorrect sequence of
control API calls may result in crashes, deadlocks, or race
conditions. For example, calling napi_disable() multiple times in a
row will deadlock.
In the normal open and close paths, rtnl_mutex is acquired to prevent
other callers. This is missing from veth_pool_store. Use rtnl_mutex in
veth_pool_store fixes these hangs.
Signed-off-by: Dave Marquardt <davemarq@linux.ibm.com>
Fixes: 860f242 ("[PATCH] ibmveth change buffer pools dynamically")
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402154403.386744-1-davemarq@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Jun 9, 2025
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampolines for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The idea and most of the implementation is taken from the ARM64's implementation of the same feature. The idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. We use -fpatchable-function-entry to reserve 8 bytes above the function entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer to the associated ftrace_ops for that callsite. Functions are aligned to 8 bytes to make sure that the accesses to this literal are atomic. This approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. We've benchamrked this with the ftrace_ops sample module on Spacemit K1 Jupiter: Without this patch: baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1357958 | 13 | - | | 0 | 1 | 1302375 | 13 | - | | 0 | 2 | 1302375 | 13 | - | | 0 | 10 | 1379084 | 13 | - | | 0 | 100 | 1302458 | 13 | - | | 0 | 200 | 1302333 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13677833 | 136 | 123 | | 1 | 1 | 18500916 | 185 | 172 | | 1 | 2 | 2285645 | 228 | 215 | | 1 | 10 | 58824709 | 588 | 575 | | 1 | 100 | 505141584 | 5051 | 5038 | | 1 | 200 | 1580473126 | 15804 | 15791 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 13561000 | 135 | 122 | | 2 | 0 | 19707292 | 197 | 184 | | 10 | 0 | 67774750 | 677 | 664 | | 100 | 0 | 714123125 | 7141 | 7128 | | 200 | 0 | 1918065668 | 19180 | 19167 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. With this patch: v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29 +-----------------------+-----------------+----------------------------+ | Number of tracers | Total time (ns) | Per-call average time | |-----------------------+-----------------+----------------------------| | Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) | |----------+------------+-----------------+------------+---------------| | 0 | 0 | 1459917 | 14 | - | | 0 | 1 | 1408000 | 14 | - | | 0 | 2 | 1383792 | 13 | - | | 0 | 10 | 1430709 | 14 | - | | 0 | 100 | 1383791 | 13 | - | | 0 | 200 | 1383750 | 13 | - | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5238041 | 52 | 38 | | 1 | 1 | 5228542 | 52 | 38 | | 1 | 2 | 5325917 | 53 | 40 | | 1 | 10 | 5299667 | 52 | 38 | | 1 | 100 | 5245250 | 52 | 39 | | 1 | 200 | 5238459 | 52 | 39 | |----------+------------+-----------------+------------+---------------| | 1 | 0 | 5239083 | 52 | 38 | | 2 | 0 | 19449417 | 194 | 181 | | 10 | 0 | 67718584 | 677 | 663 | | 100 | 0 | 709840708 | 7098 | 7085 | | 200 | 0 | 2203580626 | 22035 | 22022 | +----------+------------+-----------------+------------+---------------+ Note: per-call overhead is estimated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/3 of the overhead prior to this series (from 122ns to 38ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> [update kconfig, asm, refactor] Signed-off-by: Andy Chiu <andybnac@gmail.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20250407180838.42877-10-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
ffainelli
pushed a commit
that referenced
this pull request
Nov 5, 2025
…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, round #3 - Invalidate nested MMUs upon freeing the PGD to avoid WARNs when visiting from an MMU notifier - Fixes to the TLB match process and TLB invalidation range for managing the VCNR pseudo-TLB - Prevent SPE from erroneously profiling guests due to UNKNOWN reset values in PMSCR_EL1 - Fix save/restore of host MDCR_EL2 to account for eagerly programming at vcpu_load() on VHE systems - Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios where an xarray's spinlock was nested with a *raw* spinlock - Permit stage-2 read permission aborts which are possible in the case of NV depending on the guest hypervisor's stage-2 translation - Call raw_spin_unlock() instead of the internal spinlock API - Fix parameter ordering when assigning VBAR_EL1 [Pull into kvm/master to fix conflicts. - Paolo]
ffainelli
pushed a commit
that referenced
this pull request
Nov 5, 2025
Write combining is an optimization feature in CPUs that is frequently used by modern devices to generate 32 or 64 byte TLPs at the PCIe level. These large TLPs allow certain optimizations in the driver to HW communication that improve performance. As WC is unpredictable and optional the HW designs all tolerate cases where combining doesn't happen and simply experience a performance degradation. Unfortunately many virtualization environments on all architectures have done things that completely disable WC inside the VM with no generic way to detect this. For example WC was fully blocked in ARM64 KVM until commit 8c47ce3 ("KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device"). Trying to use WC when it is known not to work has a measurable performance cost (~5%). Long ago mlx5 developed an boot time algorithm to test if WC is available or not by using unique mlx5 HW features to measure how many large TLPs the device is receiving. The SW generates a large number of combining opportunities and if any succeed then WC is declared working. In mlx5 the WC optimization feature is never used by the kernel except for the boot time test. The WC is only used by userspace in rdma-core. Sadly modern ARM CPUs, especially NVIDIA Grace, have a combining implementation that is very unreliable compared to pretty much everything prior. This is being fixed architecturally in new CPUs with a new ST64B instruction, but current shipping devices suffer this problem. Unreliable means the SW can present thousands of combining opportunities and the HW will not combine for any of them, which creates a performance degradation, and critically fails the mlx5 boot test. However, the CPU is very sensitive to the instruction sequence used, with the better options being sufficiently good that the performance loss from the unreliable CPU is not measurable. Broadly there are several options, from worst to best: 1) A C loop doing a u64 memcpy. This was used prior to commit ef30228 ("IB/mlx5: Use __iowrite64_copy() for write combining stores") and failed almost all the time on Grace CPUs. 2) ARM64 assembly with consecutive 8 byte stores. This was implemented as an arch-generic __iowriteXX_copy() family of functions suitable for performance use in drivers for WC. commit ead7911 ("arm64/io: Provide a WC friendly __iowriteXX_copy()") provided the ARM implementation. 3) ARM64 assembly with consecutive 16 byte stores. This was rejected from kernel use over fears of virtualization failures. Common ARM VMMs will crash if STP is used against emulated memory. 4) A single NEON store instruction. Userspace has used this option for a very long time, it performs well. 5) For future silicon the new ST64B instruction is guaranteed to generate a 64 byte TLP 100% of the time The past upgrade from #1 to #2 was thought to be sufficient to solve this problem. However, more testing on more systems shows that #3 is still problematic at a low frequency and the kernel test fails. Thus, make the mlx5 use the same instructions as userspace during the boot time WC self test. This way the WC test matches the userspace and will properly detect the ability of HW to support the WC workload that userspace will generate. While #4 still has imperfect combining performance, it is substantially better than #2, and does actually give a performance win to applications. Self-test failures with #2 are like 3/10 boots, on some systems, #4 has never seen a boot failure. There is no real general use case for a NEON based WC flow in the kernel. This is not suitable for any performance path work as getting into/out of a NEON context is fairly expensive compared to the gain of WC. Future CPUs are going to fix this issue by using an new ARM instruction and __iowriteXX_copy() will be updated to use that automatically, probably using the ALTERNATES mechanism. Since this problem is constrained to mlx5's unique situation of needing a non-performance code path to duplicate what mlx5 userspace is doing as a matter of self-testing, implement it as a one line inline assembly in the driver directly. Lastly, this was concluded from the discussion with ARM maintainers which confirms that this is the best approach for the solution: https://lore.kernel.org/r/aHqN_hpJl84T1Usi@arm.com Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1759093688-841357-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ffainelli
pushed a commit
that referenced
this pull request
Nov 5, 2025
The ns_bpf_qdisc selftest triggers a kernel panic: Oops[#1]: CPU 0 Unable to handle kernel paging request at virtual address 0000000000741d58, era == 90000000851b5ac0, ra == 90000000851b5aa4 CPU: 0 UID: 0 PID: 449 Comm: test_progs Tainted: G OE 6.16.0+ #3 PREEMPT(full) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000851b5ac0 ra 90000000851b5aa4 tp 90000001076b8000 sp 90000001076bb600 a0 0000000000741ce8 a1 0000000000000001 a2 90000001076bb5c0 a3 0000000000000008 a4 90000001004c4620 a5 9000000100741ce8 a6 0000000000000000 a7 0100000000000000 t0 0000000000000010 t1 0000000000000000 t2 9000000104d24d30 t3 0000000000000001 t4 4f2317da8a7e08c4 t5 fffffefffc002f00 t6 90000001004c4620 t7 ffffffffc61c5b3d t8 0000000000000000 u0 0000000000000001 s9 0000000000000050 s0 90000001075bc800 s1 0000000000000040 s2 900000010597c400 s3 0000000000000008 s4 90000001075bc880 s5 90000001075bc8f0 s6 0000000000000000 s7 0000000000741ce8 s8 0000000000000000 ra: 90000000851b5aa4 __qdisc_run+0xac/0x8d8 ERA: 90000000851b5ac0 __qdisc_run+0xc8/0x8d8 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000741d58 PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE)] Process test_progs (pid: 449, threadinfo=000000009af02b3a, task=00000000e9ba4956) Stack : 0000000000000000 90000001075bc8ac 90000000869524a8 9000000100741ce8 90000001075bc800 9000000100415300 90000001075bc8ac 0000000000000000 900000010597c400 900000008694a000 0000000000000000 9000000105b59000 90000001075bc800 9000000100741ce8 0000000000000050 900000008513000c 9000000086936000 0000000100094d4c fffffff400676208 0000000000000000 9000000105b59000 900000008694a000 9000000086bf0dc0 9000000105b59000 9000000086bf0d68 9000000085147010 90000001075be788 0000000000000000 9000000086bf0f98 0000000000000001 0000000000000010 9000000006015840 0000000000000000 9000000086be6c40 0000000000000000 0000000000000000 0000000000000000 4f2317da8a7e08c4 0000000000000101 4f2317da8a7e08c4 ... Call Trace: [<90000000851b5ac0>] __qdisc_run+0xc8/0x8d8 [<9000000085130008>] __dev_queue_xmit+0x578/0x10f0 [<90000000853701c0>] ip6_finish_output2+0x2f0/0x950 [<9000000085374bc8>] ip6_finish_output+0x2b8/0x448 [<9000000085370b24>] ip6_xmit+0x304/0x858 [<90000000853c4438>] inet6_csk_xmit+0x100/0x170 [<90000000852b32f0>] __tcp_transmit_skb+0x490/0xdd0 [<90000000852b47fc>] tcp_connect+0xbcc/0x1168 [<90000000853b9088>] tcp_v6_connect+0x580/0x8a0 [<90000000852e7738>] __inet_stream_connect+0x170/0x480 [<90000000852e7a98>] inet_stream_connect+0x50/0x88 [<90000000850f2814>] __sys_connect+0xe4/0x110 [<90000000850f2858>] sys_connect+0x18/0x28 [<9000000085520c94>] do_syscall+0x94/0x1a0 [<9000000083df1fb8>] handle_syscall+0xb8/0x158 Code: 4001ad80 2400873 2400832d <240073cc> 001137ff 001133ff 6407b41f 001503cc 0280041d ---[ end trace 0000000000000000 ]--- The bpf_fifo_dequeue prog returns a skb which is a pointer. The pointer is treated as a 32bit value and sign extend to 64bit in epilogue. This behavior is right for most bpf prog types but wrong for struct ops which requires LoongArch ABI. So let's sign extend struct ops return values according to the LoongArch ABI ([1]) and return value spec in function model. [1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html Cc: stable@vger.kernel.org Fixes: 6abf17d ("LoongArch: BPF: Add struct ops support for trampoline") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
ffainelli
pushed a commit
that referenced
this pull request
Jan 8, 2026
When interrupting perf stat in repeat mode with a signal the signal is passed to the child process but the repeat doesn't terminate: ``` $ perf stat -v --null --repeat 10 sleep 1 Control descriptor is not initialized [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] ^Csleep: Interrupt [ perf stat: executing run #3 ... ] [ perf stat: executing run #4 ... ] [ perf stat: executing run #5 ... ] [ perf stat: executing run torvalds#6 ... ] [ perf stat: executing run torvalds#7 ... ] [ perf stat: executing run torvalds#8 ... ] [ perf stat: executing run torvalds#9 ... ] [ perf stat: executing run torvalds#10 ... ] Performance counter stats for 'sleep 1' (10 runs): 0.9500 +- 0.0512 seconds time elapsed ( +- 5.39% ) 0.01user 0.02system 0:09.53elapsed 0%CPU (0avgtext+0avgdata 18940maxresident)k 29944inputs+0outputs (0major+2629minor)pagefaults 0swaps ``` Terminate the repeated run and give a reasonable exit value: ``` $ perf stat -v --null --repeat 10 sleep 1 Control descriptor is not initialized [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] ^Csleep: Interrupt Performance counter stats for 'sleep 1' (10 runs): 0.680 +- 0.321 seconds time elapsed ( +- 47.16% ) Command exited with non-zero status 130 0.00user 0.01system 0:02.05elapsed 0%CPU (0avgtext+0avgdata 70688maxresident)k 0inputs+0outputs (0major+5002minor)pagefaults 0swaps ``` Note, this also changes the exit value for non-repeat runs when interrupted by a signal. Reported-by: Ingo Molnar <mingo@kernel.org> Closes: https://lore.kernel.org/lkml/aS5wjmbAM9ka3M2g@gmail.com/ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Bumps requests from 2.31.0 to 2.32.0.
Release notes
Sourced from requests's releases.
... (truncated)
Changelog
Sourced from requests's changelog.
Commits
d6ebc4av2.32.09a40d12Avoid reloading root certificates to improve concurrent performance (#6667)0c030f7Merge pull request #6702 from nateprewitt/no_char_detection555b870Allow character detection dependencies to be optional in post-packaging stepsd6dded3Merge pull request #6700 from franekmagiera/update-redirect-to-invalid-uri-testbf24b7dUse an invalid URI that will not cause httpbin to throw 5002d5f547Pin 3.8 and 3.9 runners back to macos-13 (#6688)f1bb07dMerge pull request #6687 from psf/dependabot/github_actions/github/codeql-act...60047adBump github/codeql-action from 3.24.0 to 3.25.031ebb81Merge pull request #6682 from frenzymadness/pytest8Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
@dependabot rebasewill rebase this PR@dependabot recreatewill recreate this PR, overwriting any edits that have been made to it@dependabot mergewill merge this PR after your CI passes on it@dependabot squash and mergewill squash and merge this PR after your CI passes on it@dependabot cancel mergewill cancel a previously requested merge and block automerging@dependabot reopenwill reopen this PR if it is closed@dependabot closewill close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually@dependabot show <dependency name> ignore conditionswill show all of the ignore conditions of the specified dependency@dependabot ignore this major versionwill close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this minor versionwill close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this dependencywill close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)You can disable automated security fix PRs for this repo from the Security Alerts page.