CCSMB · znepb · Mar 30, 2024 · Mar 30, 2024 · Mar 30, 2024 · Mar 30, 2024
diff --git a/Standards/CCSMB-15.md b/Standards/CCSMB-15.md
@@ -0,0 +1,60 @@
+# _CCSMB-15_: Wide Printer Format and Wide Printer Format Array
+
+_Author: znepb_  
+_Version_: 1.0.0  
+_Last revised:_  
+The words MUST, MUST NOT, SHOULD, SHOULD NOT, and MAY are defined in [RFC 2119](https://www.rfc-editor.org/rfc/rfc2119).
+
+## Rationale
+
+Wide Printer Format (2dj) is a file format used by [SwitchCraft Peripherals](https://github.com/SwitchCraftCC/sc-peripherals) to print poster files. These files contain information to print onto these posters, each pixel being a different color similar to map files. Wide Format Print (A) (2dja), is similar to 2dj.
+
+## 2dj
+
+### Format
+
+| Information |                     |
+| ----------- | ------------------- |
+| Version     | 1.0.0               |
+| Type        | Wide Printer Format |
+| MIME        | `image/2dj`         |
+| Extensions  | `.2dj`              |
+
+Wide Printer Format files MUST follow [RFC 8259](https://datatracker.ietf.org/doc/html/rfc8259), "The JavaScript Object Notation (JSON) Data Interchange Format." These files MUST also use the file extension `.2dj`. The file MUST contain an object, with keys and values specified below.
+
+### Keys
+
+- `label`: This key SHOULD contain the name of the poster. It MUST be a string.
+- `tooltip`: This key MAY contain a tooltip displayed while hovering over the poster in the players inventory. It MUST be a string.
+- `palette`: MUST be `null` or an array and MUST NOT have more than 63 values. This defines the color palette the poster will use.
+  - Each value MUST be a hexadecimal value between `0x000000` (0) and `0xFFFFFF` (16777215)
+  - In the event that this key is not provided, the printer MUST follow the [default Minecraft colors for maps.](https://minecraft.wiki/w/Map_item_format#Base_colors)
+  - Index zero MUST NOT be included. This is reserved for the transparent color.
+- `pixels`: MUST be an array of length 16384. Each value MUST be between zero (0) and sixty-three (63).
+  - Each value MUST correspond to its value in the index of palette. For example, if the value is 2, and index 2 of `palette` is `0xff0000`, that color MUST be red.
+- `width` and `height`: MAY be included, if included its value MUST be the number `128`.
+
+## 2dja
+
+| Information |                           |
+| ----------- | ------------------------- |
+| Version     | 1.0.0                     |
+| Type        | Wide Printer Format Array |
+| MIME        | `image/2dja`              |
+| Extensions  | `.2dja`                   |
+
+### Format
+
+Wide Printer Format Array files MUST follow [RFC 8259](https://datatracker.ietf.org/doc/html/rfc8259), "The JavaScript Object Notation (JSON) Data Interchange Format." These files MUST also use the file extension `.2dja`. The file MUST contain an object, with keys and values specified below.
+
+### Keys
+
+- `title`: This key SHOULD contain the title of the poster array. It MUST be a string.
+- `width`: This key SHOUlD be included, and if included, MUST be the width of the poster array. It MUST be a number.
+- `height`: This key SHOULD be the height, and if included, MUST be the poster array. It MUST be a number.
+- `pages`: MUST be an array of 2dj files.
+
+## References
+
+- https://docs.sc3.io/features/sc-peripherals.html#_2dja-format
+- https://docs.sc3.io/features/sc-peripherals.html#_2dja-format
diff --git a/Standards/CCSMB-16.md b/Standards/CCSMB-16.md
@@ -0,0 +1,62 @@
+# _CCSMB-16_: 3D Print JSON
+
+_Author: znepb_  
+_Version_: 1.0.0  
+_Last revised:_  
+The words MUST, MUST NOT, SHOULD, SHOULD NOT, and MAY are defined in [RFC 2119](https://www.rfc-editor.org/rfc/rfc2119).
+
+## Rational
+
+3D Print JSON Storage (3dj) is a file format used by [SwitchCraft peripherals](https://github.com/SwitchCraftCC/sc-peripherals) to create 3-dimensional prints. These files contain shapes and other metadata to create 3D prints, special blocks which can have special geometry and other properties
+
+### Format
+
+| Information |               |
+| ----------- | ------------- |
+| Version     | 1.0.0         |
+| Type        | 3D Print JSON |
+| MIME        | `model/3dj`   |
+| Extensions  | `.3dj`        |
+
+2D JSON Image Storage files MUST follow [RFC 8259](https://datatracker.ietf.org/doc/html/rfc8259), "The JavaScript Object Notation (JSON) Data Interchange Format." These files MUST also use the file extension `.3dj`. The file MUST contain an object, with keys and values specified below.
+
+## States
+
+3D prints contain two states:
+
+- Off: When off, all data specified as being off will be used. This is the default state for all 3D prints.
+- On: For this to be available, the 3D print MUST contain a `shapesOn` array.
+
+## Definitions
+
+### Shape
+
+A JSON object defining a shape in the 3D print.  
+**Keys:**
+
+- `bounds`: MUST be an array of integers zero (0) through sixteen (16), and MUST be of length six (6). The array MUST contain positions in this order: `minX`, `minY`, `minZ`, `maxX`, `maxY`, `maxZ`.
+- `texture`: MUST be a string containing a path to a texture.
+  - Example: `minecraft:block/stone`
+  - Format: `<namespace>:<type>/<file>`
+- `tint`: MAY be a string, number, or `null`.
+  - If a string, it MUST follow the `RRGGBB` format.
+  - If a number, it MUST be between `0x000000` (0) and `0xFFFFFF` (16777215). It SHOULD be represented as a hexadecimal in the file (e.g. `0x16D34B`).
+
+## Keys
+
+- `label`: SHOULD contain the name of the 3D print. It MUST be a string. It MUST be a string.
+- `tooltip`: MUST be a string or `null`. MAY contain a tooltip with a brief explanation of the 3D print, displayed while hovering over the 3D print in the players inventory.
+- `isButton`: MUST be `null` or a boolean. When set, the 3D print will act like a button, pressing the print will shift from the `OFF` state to the `ON` state for a moment. This is `false` by default.
+- `collideWhenOff`: MUST be `null` or a boolean, defines whether or not the 3D print will respect collision in the `OFF` state. This is `true` by default.
+- `collideWhenOn`: MUST be `null` or a boolean, defines whether or not the 3D print will respect collision in the `ON` state. This is `true` by default.
+- `lightLevel`: MUST be an integer from zero (0) to fifteen (15), or `null`. This is zero (0) by default.
+- `lightWhenOff`: MUST be an boolean or `null`. This defines if the print will emit light when in the `OFF` state. This is `true` by default.
+- `lightWhenOn`: MUST be `null` or a boolean. This defines if the print will emit light when in the `ON` state. This is `true` by default.
+- `redstoneLevel`: MUST be `null` or an integer ranging from zero (0) to fifteen (15). This defines the redstone level the 3D print will output. This is zero (0) by default.
+- `seatPos`: MUST be `null`, or an array of length three (3). Each value MUST be a number between 0.1 and 0.9.
+- `shapesOff`: MUST be an array of shapes (see Definitions), and SHOULD have a length greater than zero (0). This is the shapes that will be displayed in the block.
+- `shapesOn`: MUST be an array of shapes (see Definitions). If the ability to switch the print between the `ON` and `OFF` state is not desired, the length of this array MUST be zero (0).
+
+## References
+
+-https://docs.sc3.io/features/sc-peripherals.html#_3dj-format