STM32F103

Hardware BOARD V0.1

All file include and source in this: https://github.com/nguyentrungthao/STM32/tree/dev

Module 7 segment with two ic 74595

1. Pin configuration.

STM32	74595
PA4	SER
PA5	OE
PA6	RCLK
PA7	SRCLK

2. Code

high 8-bit to select a 7-segment digit low 8-bit is code-7-segment code7segment is used in this board sequence:

/* this code only use for this version board */
const char code7seg[] = {0xD7, 0x14, 0xCD, 0x5D, 0x1E, 0x5B, 0xDB, 0x15, 0xDF, 0x5F};

Module rotary encoder

1. Pin configuration

STM32	Rotary Encoder	description
PA8	channel A	pull up
PA9	channel B	pull up
PA10	buttuon	pull up

2. Code

PA8 - PA9 is encoder mode of timer1

/* Enable TIM1 encoder mode */
/* USER CODE BEGIN 2 */
HAL_TIM_Encoder_Start_IT(&htim1, TIM_CHANNEL_ALL);
/* USER CODE END 2 */

/* Get encoder value */
encoderValue = __HAL_TIM_GetCounter(&htim1);

AC voltage control

1. Pin configuration

STM32	Module	description
PB0	AC Detec	pull up
PB1	Triac

2. code

PB0 should be an EXT pin

/* proccess when interrupt */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin){
	if(GPIO_Pin == ACDET_Pin){
		SETFLAG(FLAG_ACDET_TRIGGER, flag);
        // control angle to set triac base on time which is calculated by PID
		__HAL_TIM_SET_COUNTER(&htim4, (uint16_t)(triac.giaTriDieuKhien * 1000));
//		__HAL_TIM_SET_COUNTER(&htim4, 9000);
	}
}