Ivystone_v0.5

Release Note

1. ONLP: Fix the PSU to display present status for correct with actual output from CPLD register.
2. ONLP: Update LED status for correct with CPLD document.

Questone2a v0.0.3

v0.0.3

1. Update the correct PlatformPortConfig to 48x25_8x100.
2. Update the unique driver name and change onlp to support this change.
3. Create blacklist when ONL initilize regaring to prevent udev to probe the FPGA driver from other platform.

Questone2a_v0.0.1

Celestica Questone2a for Arrcus

ONL base commit id from Arrcus
a268a23

1. All BSP and Initialize methods same as Questone2 DVT.
   (https://github.com/SW-CSV/OpenNetworkLinux/releases/tag/Q2_DVT_v0.7.9)
2. ONLP port from Silverstone project with new configuration

Silverstone2_v0.1.1

1. Update ONLP to display correct PSU value on Model section.

Q2_DVT_v0.7.9

Release Note

1. Update ONLP Thermal sensors name that change from U1 and U18 to U30 and U31.
2. Fix ONLP, SFP issue display between port 8 and port 1.

Questone2a v0.0.2

v0.0.2

1. Change the platform name from x86_64-cel_questone_2-r0 to x86_64-cel_questone_2a-r0
2. ONLP update the PSU behavior when Unplug(Remove power cord) and remove PSU.
3. ONLP Re-order sfp to display SFP first following physical label.

Seastone2_v0.8.0_9600

Fix issues

1. Change baud rate to be 9600 to suit costumer banyan's requirement.
2. Remove hw-management to shield modules probing fatal message when booting

Known issue

1. selinux function is enabled default so message "SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.30:" displayed when booting, this can be fixed by adding "selinux=0" on grub menu.
2. Message "umount: can't umount /sys/firmware/efi/efivars: Invalid argument" displayed when booting

Silverstone2_v0.0.2

1. Update Platform name for corresponding with ONIE from cel_silverstone_2 to cel_silverstone2
2. Install ONL as Unremoveable Diag OS.
3. Adjust Kernel print level to hide message when BMC update.

Mt.Echo v1.5 Baud rate 9600

• Update baud rate configuration to 9600.

Silverstone_DP_v0.2.1

Fix issues

1. BSP: Add i2c-6 to access u17(SI5395D). (http://10.204.28.163/r/2354/)
2. BSP: Fix the issue with SFP sysfs that working wrong. (http://10.204.28.163/r/2361/)
3. ONL: Update install script to config the onie not to change boot sequence after installation complete. (http://10.204.28.93/redmine/issues/8621)
4. ONL: Remove ubinfo checking command when ONL initialize. (http://10.204.28.93/redmine/issues/8634)