module: Don't fail module loading when setting ro_after_init section RO failed

.github/workflows/kdevops-cleanup.yml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# This can be used towards the end of your action. All tasks here run even if
+# any of the previous tasks failed.
+
+name: Kdevops cleanup workflow
+
+on:
+  workflow_call:  # Makes this workflow reusable
+
+jobs:
+  cleanup:
+    name: Archive results and cleanup
+    runs-on: [self-hosted, Linux, X64]
+    steps:
+      - name: Set Linux kdevops development path
+        if: ${{ job.status != 'cancelled' }}
+        run: echo "LINUX_KDEVOPS_PATH=$GITHUB_WORKSPACE" >> $GITHUB_ENV
+
+      - name: Get systemd journal files
+        if: ${{ job.status != 'cancelled' }}
+        run: |
+          if [[ ! -d kdevops ]]; then
+            exit 0
+          fi
+          cd kdevops
+          make journal-dump
+
+      - name: Start SSH Agent
+        if: ${{ job.status != 'cancelled' }}
+        uses: webfactory/ssh-agent@v0.9.0
+        with:
+          ssh-private-key: ${{ secrets.SSH_PRIVATE_KEY }}
+
+      - name: Build our kdevops archive results
+        if: ${{ job.status != 'cancelled' }}
+        run: |
+          if [[ ! -d kdevops ]]; then
+            exit 0
+          fi
+          cd kdevops
+          make ci-archive
+
+      - name: Upload our kdevops results archive
+        if: ${{ job.status != 'cancelled' }}
+        uses: actions/upload-artifact@v4
+        with:
+          name: kdevops-ci-results
+          path: ${{ env.LINUX_KDEVOPS_PATH }}/kdevops/archive/*.zip
+
+      - name: Run kdevops make destroy
+        if: always()
+        run: |
+          if [[ ! -d kdevops ]]; then
+            exit 0
+          fi
+          cd kdevops
+          make destroy
+          cd ..
+          rm -rf kdevops

.github/workflows/kdevops-generic.yml

@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Most simple Linux kernel subsystems can be tested with this target
+# test setup. For more elaborates tests look for a topic branch under the
+# kdevops-ci tree. For example to test a filesystem look at the fstests
+# branch.
+
+name: Run generic kdevops CI tests
+
+on:
+  push:
+    branches: ['**']
+  pull_request:
+    branches: ['**']
+  workflow_dispatch:  # Allow manual triggering
+
+jobs:
+  setup:
+    uses: ./.github/workflows/kdevops-init.yml
+    secrets: inherit
+
+  run-tests:
+    needs: setup
+    name: Run CI tests
+    runs-on: [self-hosted, Linux, X64]
+    steps:
+      - name: Run CI tests
+        run: |
+          cd kdevops
+          make ci-test
+          echo "ok" > ci.result
+
+  cleanup:
+    needs: [run-tests, setup]  # Add setup as a dependency to ensure proper ordering
+    if: always()  # This ensures cleanup runs even if run-tests fails
+    uses: ./.github/workflows/kdevops-cleanup.yml
+    secrets: inherit

.github/workflows/kdevops-init.yml

@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# This can be used as a initialization workflow for most Linux kernel
+# development environments. This takes care of:
+#
+#   - Checks out and re-using a local mirror for your kernel tree
+#   - Looks for a defconfig in kdevops to use for your kernel tree
+#   - Sets up CI metadata for kdevops-results-archive
+#   - Ensures your kernel tree at least builds with defconfig
+#   - Brings up target DUTs nodes
+#   - Installs your Linux kernel tree on them
+#   - Builds all of your test requirements for your Linux kernel tree
+
+name: Base kdevops workflow
+
+on:
+  workflow_call:  # Makes this workflow reusable
+    inputs:
+      kdevops_defconfig:
+        required: false
+        type: string
+
+jobs:
+  setup:
+    name: Setup kdevops environment
+    runs-on: [self-hosted, Linux, X64]
+    steps:
+      - name: Verify we won't expect user input interactions on the host key
+        run: |
+          mkdir -p ~/.ssh
+          if ! grep -q "StrictHostKeyChecking no" ~/.ssh/config 2>/dev/null; then
+            echo "StrictHostKeyChecking no" >> ~/.ssh/config
+          fi
+
+      - name: Start SSH Agent for initial test
+        uses: webfactory/ssh-agent@v0.9.0
+        with:
+          ssh-private-key: ${{ secrets.SSH_PRIVATE_KEY }}
+
+      # Modify the repo here if you have a custom or private URL for the archive
+      # This can also just be a repo variable later.
+      - name: Verify our ssh connection will work
+        run: |
+          if ! git ls-remote git@github.com:linux-kdevops/kdevops-results-archive.git HEAD; then
+            echo "Cannot access kdevops-results-archive repository"
+            exit 1
+          fi
+
+      - name: Configure git
+        run: |
+          git config --global --add safe.directory '*'
+          git config --global user.name "kdevops"
+          git config --global user.email "kdevops@lists.linux.dev"
+
+      - name: Checkout kdevops
+        run: |
+          rm -rf kdevops
+          git clone /mirror/kdevops.git kdevops
+
+      - name: Make sure our repo kdevops defconfig exists
+        run: |
+          cd kdevops
+          if [[ -z "${{ inputs.kdevops_defconfig }}" ]]; then
+            KDEVOPS_DEFCONFIG=$(basename ${{ github.repository }})
+          else
+            KDEVOPS_DEFCONFIG="${{ inputs.kdevops_defconfig }}"
+          fi
+
+          if [[ ! -f defconfigs/$KDEVOPS_DEFCONFIG ]]; then
+            echo "kdevops lacks a defconfig for this repository, expected to find: defconfigs/$KDEVOPS_DEFCONFIG"
+            exit 1
+          fi
+
+          echo "KDEVOPS_DEFCONFIG=$KDEVOPS_DEFCONFIG" >> $GITHUB_ENV
+
+      - name: Checkout custom branch with delta on kdevops/linux
+        run: |
+          LINUX_TREE="https://github.com/${{ github.repository }}"
+          LINUX_TREE_REF="${{ github.event_name == 'pull_request' && github.event.pull_request.head.sha || github.sha }}"
+          cd kdevops
+          git clone $LINUX_TREE --reference /mirror/linux.git/ --depth=5 linux
+          cd linux
+          git fetch origin $LINUX_TREE_REF
+          git checkout $LINUX_TREE_REF
+          git log -1
+
+      - name: Initialize CI metadata for kdevops-results-archive for linux
+        run: |
+          cd kdevops/linux
+          echo "$(basename ${{ github.repository }})" > ../ci.trigger
+
+          # This supports using kdevops github actions using two different
+          # approaches:
+          #
+          #  1) Commit the .github/ directory onto a Linux tree before your
+          #     kernel changes. This approach is used for example for
+          #     testing patches posted on the mailing list with patchwork,
+          #     this is the strategy kernel-patch-deaemon uses. Since the
+          #     patches are ephemeral there is not important git history to
+          #     maintain.
+          #
+          #  2) Merge the .github/ directory at the end of your development
+          #     tree. This is useful for kernel developers wishing to test
+          #     existing trees.
+          #
+          # So this checks to see if the last commit (top of the tree) *added*
+          # the .github directory. If the last commit added it, then we assume
+          # the commit prior to it was the one we'd like to document as the main
+          # test point.
+          if git diff-tree --no-commit-id --name-only --diff-filter=A -r HEAD | grep -q "^\.github/"; then
+            git log -2 --skip=1 --pretty=format:"%s" -1 > ../ci.subject
+            git describe --exact-match --tags HEAD^ 2>/dev/null || git rev-parse --short HEAD^ > ../ci.ref
+          else
+            git log -1 --pretty=format:"%s" > ../ci.subject
+            git describe --exact-match --tags HEAD 2>/dev/null || git rev-parse --short HEAD > ../ci.ref
+          fi
+
+          RELEVANT_GIT_TAG=$(cat ../ci.ref)
+          RELEVANT_GIT_REF=$(git rev-parse --short=12 $RELEVANT_GIT_TAG)
+
+          echo "LINUX_GIT_REF=$RELEVANT_GIT_REF" >> $GITHUB_ENV
+          echo "LINUX_GIT_TAG=$RELEVANT_GIT_TAG" >> $GITHUB_ENV
+
+          # Start out pessimistic
+          echo "unknown" > ../ci.result
+          echo "Nothing to write home about." > ../ci.commit_extra
+
+      - name: Run a quick Linux kernel defconfig build test
+        run: |
+          cd kdevops/linux
+          git reset --hard ${{ env.LINUX_GIT_TAG }}
+          make defconfig
+          make -j$(nproc)
+
+      - name: Run kdevops make defconfig-repo
+        run: |
+          LINUX_TREE="https://github.com/${{ github.repository }}"
+          LINUX_TREE_REF="${{ env.LINUX_GIT_TAG }}"
+
+          # We make the compromise here to use a relevant git tag for the
+          # host prefix so that folks can easily tell what exact kernel tree
+          # is being tested by using the relevant git ref. That is, if you
+          # pushed a tree with the .github/ directory as the top of the tree,
+          # that commit will not be used, we'll use the last one as that is
+          # the relevant git ref we want to annotate a test for.
+          #
+          # The compromise here we use special KDEVOPS to separete the
+          # commit ID and github.run_id. Exotic things likes UTF characters
+          # and dots have problems.
+          KDEVOPS_HOSTS_PREFIX="${{ env.LINUX_GIT_REF }}KDEVOPS${{ github.run_id }}"
+
+          echo "Going to use defconfig-${{ env.KDEVOPS_DEFCONFIG }}"
+
+          echo "Linux tree:          $LINUX_TREE"
+          echo "Linux trigger ref:   $LINUX_TREE_REF"
+          echo "Linux tag:           ${{ env.LINUX_GIT_TAG }}"
+          echo "Runner ID:           ${{ github.run_id }}"
+          echo "kdevops host prefix: $KDEVOPS_HOSTS_PREFIX"
+          echo "kdevops defconfig:   defconfig-${{ env.KDEVOPS_DEFCONFIG }}"
+
+          KDEVOPS_ARGS="KDEVOPS_HOSTS_PREFIX=$KDEVOPS_HOSTS_PREFIX LINUX_TREE=$LINUX_TREE LINUX_TREE_REF=$LINUX_TREE_REF defconfig-${{ env.KDEVOPS_DEFCONFIG }}"
+          echo "Going to run:"
+          echo "make $KDEVOPS_ARGS"
+
+          cd kdevops
+          make $KDEVOPS_ARGS
+
+      - name: Run kdevops make
+        run: |
+          cd kdevops
+          make -j$(nproc)
+
+      - name: Run kdevops make bringup
+        run: |
+          cd kdevops
+          ls -ld linux
+          make bringup
+
+      - name: Build linux and boot test nodes on test kernel
+        run: |
+          cd kdevops
+          make linux
+
+      - name: Build required ci tests
+        run: |
+          cd kdevops
+          make ci-build-test

arch/arm/kernel/module-plts.c

@@ -285,11 +285,9 @@ bool in_module_plt(unsigned long loc)
 	struct module *mod;
 	bool ret;
 
-	preempt_disable();
+	guard(rcu)();
 	mod = __module_text_address(loc);
 	ret = mod && (loc - (u32)mod->arch.core.plt_ent < mod->arch.core.plt_count * PLT_ENT_SIZE ||
 		      loc - (u32)mod->arch.init.plt_ent < mod->arch.init.plt_count * PLT_ENT_SIZE);
-	preempt_enable();
-
 	return ret;
 }

arch/arm64/kernel/ftrace.c

@@ -320,14 +320,13 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
 	 * dealing with an out-of-range condition, we can assume it
 	 * is due to a module being loaded far away from the kernel.
 	 *
-	 * NOTE: __module_text_address() must be called with preemption
-	 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+	 * NOTE: __module_text_address() must be called within a RCU read
+	 * section, but we can rely on ftrace_lock to ensure that 'mod'
 	 * retains its validity throughout the remainder of this code.
 	 */
 	if (!mod) {
-		preempt_disable();
+		guard(rcu)();
 		mod = __module_text_address(pc);
-		preempt_enable();
 	}
 
 	if (WARN_ON(!mod))

arch/loongarch/kernel/ftrace_dyn.c

@@ -85,14 +85,13 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, struct module *mod
 	 * dealing with an out-of-range condition, we can assume it
 	 * is due to a module being loaded far away from the kernel.
 	 *
-	 * NOTE: __module_text_address() must be called with preemption
-	 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+	 * NOTE: __module_text_address() must be called within a RCU read
+	 * section, but we can rely on ftrace_lock to ensure that 'mod'
 	 * retains its validity throughout the remainder of this code.
 	 */
 	if (!mod) {
-		preempt_disable();
-		mod = __module_text_address(pc);
-		preempt_enable();
+		scoped_guard(rcu)
+			mod = __module_text_address(pc);
 	}
 
 	if (WARN_ON(!mod))

arch/loongarch/kernel/unwind_orc.c

@@ -399,7 +399,7 @@ bool unwind_next_frame(struct unwind_state *state)
 		return false;
 
 	/* Don't let modules unload while we're reading their ORC data. */
-	preempt_disable();
+	guard(rcu)();
 
 	if (is_entry_func(state->pc))
 		goto end;
@@ -514,14 +514,12 @@ bool unwind_next_frame(struct unwind_state *state)
 	if (!__kernel_text_address(state->pc))
 		goto err;
 
-	preempt_enable();
 	return true;
 
 err:
 	state->error = true;
 
 end:
-	preempt_enable();
 	state->stack_info.type = STACK_TYPE_UNKNOWN;
 	return false;
 }

arch/powerpc/kernel/trace/ftrace.c

@@ -115,10 +115,8 @@ static unsigned long ftrace_lookup_module_stub(unsigned long ip, unsigned long a
 {
 	struct module *mod = NULL;
 
-	preempt_disable();
-	mod = __module_text_address(ip);
-	preempt_enable();
-
+	scoped_guard(rcu)
+		mod = __module_text_address(ip);
 	if (!mod)
 		pr_err("No module loaded at addr=%lx\n", ip);
 

arch/powerpc/kernel/trace/ftrace_64_pg.c

@@ -120,10 +120,8 @@ static struct module *ftrace_lookup_module(struct dyn_ftrace *rec)
 {
 	struct module *mod;
 
-	preempt_disable();
-	mod = __module_text_address(rec->ip);
-	preempt_enable();
-
+	scoped_guard(rcu)
+		mod = __module_text_address(rec->ip);
 	if (!mod)
 		pr_err("No module loaded at addr=%lx\n", rec->ip);
 

arch/x86/kernel/callthunks.c

@@ -98,11 +98,10 @@ static inline bool within_module_coretext(void *addr)
 #ifdef CONFIG_MODULES
 	struct module *mod;
 
-	preempt_disable();
+	guard(rcu)();
 	mod = __module_address((unsigned long)addr);
 	if (mod && within_module_core((unsigned long)addr, mod))
 		ret = true;
-	preempt_enable();
 #endif
 	return ret;
 }